8-Bit, 75 MSPS, Flash A/D Converter

Description The HI1386 is an 8-bit, high-speed flash analog-to-digital converter IC capable of digitizing analog signals at a maximum rate of 75 MSPS. The digital I/O levels of this A/D converter are compatible with ECL 100K/10KH/10K. The HI1386 is available in the commercial and industrial temp

8-Bit, 75 MSPS, Flash A/D Converter

Features • Differential Linearity Error 0.5 LSB or Less • Integral Linearity Error 0.5 LSB or Less • Built-In Integral Linearity Compensation Circuit • High-Speed Operation with Maximum Conversion Rate (Min) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8-Bit, 75 MSPS, Flash A/D Converter

文件：237.35 Kbytes Page：7 Pages

Medium Power Linear and Switching Applications

Features • Complement to BD135, BD137 and BD139 respectively Applications • Medium Power Linear and Switching

8-bit 75MSPS Flash A/D Converter

Description The CXA1386P/K are 8-bit high-speed flash A/D converter ICs capable of digitizing analog signals at the maximum rate of 75MSPS. The digital I/O levels of these A/D converters are compatible with the ECL 100K/10KH/10K. The CXA1386P/K is pin-compatible with the earlier models CXA1056P/

8-bit 75MSPS Flash A/D Converter

Description The CXA1386P/K are 8-bit high-speed flash A/D converter ICs capable of digitizing analog signals at the maximum rate of 75MSPS. The digital I/O levels of these A/D converters are compatible with the ECL 100K/10KH/10K. The CXA1386P/K is pin-compatible with the earlier models CXA1056P/

Noise shaping filter DAC

GENERAL DESCRIPTION The TDA1386T is a dual CMOS digital-to-analog converter with up-sampling filter and noise shaper. The combination of oversampling up to 4fs, noise shaping and continuous calibration conversion ensures that only simple 1st order analog post filtering is required. The TDA1386T

Noise shaping filter DAC

GENERAL DESCRIPTION The TDA1386T is a dual CMOS digital-to-analog converter with up-sampling filter and noise shaper. The combination of oversampling up to 4fs, noise shaping and continuous calibration conversion ensures that only simple 1st order analog post filtering is required. The TDA1386T