Radiation Hardened Non-Inverting Octal Buffer/Line Driver, Three-State

Description The Intersil HCTS541MS is a Radiation Hardened noninverting octal buffer/line driver, three-state outputs. The output enable pins (OEN1 and OEN2) control the three-state outputs. If either enable is high the outputs will be in the high impedance state. For data output both enables (OE

Radiation Hardened Non-Inverting Octal Buffer/Line Driver, Three-State

Features • 3 Micron Radiation Hardened CMOS SOS • Total Dose 200K RAD (Si) • SEP Effective LET No Upsets: >100 MEV-cm2/mg • Single Event Upset (SEU) Immunity 1 x 1012 RAD (Si)/s • Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse • Lat

Radiation Hardened Non-Inverting Octal Buffer/Line Driver, Three-State

Radiation Hardened Non-Inverting Octal Buffer/Line Driver, Three-State

Features • 3 Micron Radiation Hardened CMOS SOS • Total Dose 200K RAD (Si) • SEP Effective LET No Upsets: >100 MEV-cm2/mg • Single Event Upset (SEU) Immunity 1 x 1012 RAD (Si)/s • Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse • Lat

Radiation Hardened Non-Inverting Octal Buffer/Line Driver, Three-State

Description The Intersil HCTS541MS is a Radiation Hardened noninverting octal buffer/line driver, three-state outputs. The output enable pins (OEN1 and OEN2) control the three-state outputs. If either enable is high the outputs will be in the high impedance state. For data output both enables (OE

HIGH POWER OP-AMP

DESCRIPTION: The MSK 541 Series is a high power monolithic amplifier ideally suited for high power amplification and magnetic deflection applications. This amplifier is capable of operation at a supply voltage rating of 80 volts and can deliver guaranteed continuous output currents up to 5A, maki

Pentium 4 Processors Supporting Hyper-Threading Technology

Introduction The Intel® Pentium® 4 processor on 90 nm process in the 775-land package is a follow on to the Pentium 4 processor in the 478-pin package with enhancements to the Intel NetBurst® microarchitecture. The Pentium 4 processor on 90 nm process in the 775-land package uses FlipChip Land Gr

TREK 541A

APPLICATIONS  Semiconductor  LCD  Electronic assembly  ESD-sensitive processes

Ultra Low Jitter Dual Any-Frequency XO (125 fs), 0.2 to 1500 MHz

KEY FEATURES • Available with any two selectable frequencies from 0.2 MHz to 1500 MHz • Very low jitter: 125 fs Typ RMS (12 kHz – 20 MHz) • Excellent PSNR and supply noise immunity: –80 dBc Typ • 7 ppm stability option (-40 to 85 C) • 3.3 V, 2.5 V and 1.8 V VDD supply operation from the s

Capacity (20-hour) 150Ah

文件：357.08 Kbytes Page：1 Pages