Radiation Hardened Inverting Octal Buffer/Line Driver, Three-State

Description The Intersil HCTS540MS is a Radiation Hardened inverting Octal Buffer/Line Driver, with two active-low output enables. The output enable pins (OE1 and OE2) control the threestate outputs. If either enable is high the outputs will be in the high impedance state. For data output both en

Radiation Hardened Inverting Octal Buffer/Line Driver, Three-State

Description The Intersil HCTS540MS is a Radiation Hardened inverting Octal Buffer/Line Driver, with two active-low output enables. The output enable pins (OE1 and OE2) control the threestate outputs. If either enable is high the outputs will be in the high impedance state. For data output both en

Radiation Hardened Inverting Octal Buffer/Line Driver, Three-State

Features • 3 Micron Radiation Hardened CMOS SOS • Total Dose 200K RAD (Si) • SEP Effective LET No Upsets: >100 MEV-cm2/mg • Single Event Upset (SEU) Immunity 1 x 1012 RAD (Si)/s • Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse • Lat

Radiation Hardened Inverting Octal Buffer/Line Driver, Three-State

Features • 3 Micron Radiation Hardened CMOS SOS • Total Dose 200K RAD (Si) • SEP Effective LET No Upsets: >100 MEV-cm2/mg • Single Event Upset (SEU) Immunity 1 x 1012 RAD (Si)/s • Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse • Lat

Radiation Hardened Inverting Octal Buffer/Line Driver, Three-State

Description The Intersil HCTS540MS is a Radiation Hardened inverting Octal Buffer/Line Driver, with two active-low output enables. The output enable pins (OE1 and OE2) control the threestate outputs. If either enable is high the outputs will be in the high impedance state. For data output both en

Radiation Hardened Inverting Octal Buffer/Line Driver, Three-State

Description The Intersil HCTS540MS is a Radiation Hardened inverting Octal Buffer/Line Driver, with two active-low output enables. The output enable pins (OE1 and OE2) control the threestate outputs. If either enable is high the outputs will be in the high impedance state. For data output both en

Radiation Hardened Inverting Octal Buffer/Line Driver, Three-State

Features • 3 Micron Radiation Hardened CMOS SOS • Total Dose 200K RAD (Si) • SEP Effective LET No Upsets: >100 MEV-cm2/mg • Single Event Upset (SEU) Immunity 1 x 1012 RAD (Si)/s • Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse • Lat

Radiation Hardened Inverting Octal Buffer/Line Driver, Three-State

Features • 3 Micron Radiation Hardened CMOS SOS • Total Dose 200K RAD (Si) • SEP Effective LET No Upsets: >100 MEV-cm2/mg • Single Event Upset (SEU) Immunity 1 x 1012 RAD (Si)/s • Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse • Lat

Radiation Hardened Inverting Octal Buffer/Line Driver, Three-State

Description The Intersil HCTS540MS is a Radiation Hardened inverting Octal Buffer/Line Driver, with two active-low output enables. The output enable pins (OE1 and OE2) control the threestate outputs. If either enable is high the outputs will be in the high impedance state. For data output both en

Radiation Hardened Inverting Octal Buffer/Line Driver, Three-State

Description The Intersil HCTS540MS is a Radiation Hardened inverting Octal Buffer/Line Driver, with two active-low output enables. The output enable pins (OE1 and OE2) control the threestate outputs. If either enable is high the outputs will be in the high impedance state. For data output both en

Radiation Hardened Inverting Octal Buffer/Line Driver, Three-State

Features • 3 Micron Radiation Hardened CMOS SOS • Total Dose 200K RAD (Si) • SEP Effective LET No Upsets: >100 MEV-cm2/mg • Single Event Upset (SEU) Immunity 1 x 1012 RAD (Si)/s • Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse • Lat

Radiation Hardened Inverting Octal Buffer/Line Driver, Three-State

Features • 3 Micron Radiation Hardened CMOS SOS • Total Dose 200K RAD (Si) • SEP Effective LET No Upsets: >100 MEV-cm2/mg • Single Event Upset (SEU) Immunity 1 x 1012 RAD (Si)/s • Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse • Lat

Radiation Hardened Inverting Octal Buffer/Line Driver, Three-State

Description The Intersil HCTS540MS is a Radiation Hardened inverting Octal Buffer/Line Driver, with two active-low output enables. The output enable pins (OE1 and OE2) control the threestate outputs. If either enable is high the outputs will be in the high impedance state. For data output both en

CMOS Inverting Octal Buffer/Line Driver, Three-State

The Intersil HCTS540MS is a Radiation Hardened inverting Octal Buffer/Line Driver, with two active-low output enables. The output enable pins (OE1 and OE2) control the threestate outputs. If either enable is high the outputs will be the high impedance state. For data output both enables (OE1 and OE2 • 3 Micron Radiation Hardened CMOS SOS \n• Total Dose 200K RAD (Si) \n• SEP Effective LET No Upsets: >100 MEV-cm2/mg \n• Single Event Upset (SEU) Immunity -9 Errors/ Bit-Day (Typ) \n• Dose Rate Survivability: >1 x 1012 RAD (Si)/s \n• Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse \n• Latch-Up Free Unde;

丝印代码：-MG；NPN 9 GHz wideband transistor

DESCRIPTION NPN silicon planar epitaxial transistors, intended for wideband applications in the GHz range, such as analog and digital cellular telephones, cordless telephones (CT1, CT2, DECT, etc.), radar detectors, satellite TV tuners (SATV), MATV/CATV amplifiers and repeater amplifiers in fibre

NPN 9 GHz wideband transistor

DESCRIPTION NPN transistor in a plastic SOT323 envelope. It is intended for RF wideband amplifier applications such as satellite TV systems and RF portable communication equipment with signal frequencies up to 2 GHz. FEATURES • High power gain • Low noise figure • High transition frequency

Octal buffer/line driver; 3-state; inverting

GENERAL DESCRIPTION The 74HC/HCT540 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Inverting outputs • Output capability: bus driver • ICC category: MSI

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS(VOLTAGE 20 to 100 Volts CURRENT - 5 Ampere)

VOLTAGE 20 to 100 Volts CURRENT - 5 Ampere FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Low profile package • Built-in strain relief • Low power loss, High efficiency • High surge capacity

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS(VOLTAGE 20 to 100 Volts CURRENT - 5 Ampere)

VOLTAGE 20 to 100 Volts CURRENT - 5 Ampere FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Low profile package • Built-in strain relief • Low power loss, High efficiency • High surge ca