Radiation Hardened Dual 4-Input Multiplexer

Features • 3 Micron Radiation Hardened SOS CMOS • Total Dose 200K RAD (Si) • SEP Effective LET No Upsets: >100 MEV-cm2/mg • Single Event Upset (SEU) Immunity 1 x 1012 RAD (Si)/s • Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse • Lat

Radiation Hardened Dual 4-Input Multiplexer

Description The Intersil HCTS153MS is a Radiation Hardened dual 4-to-1 line selector/multiplexer which selects one of four sources for each section by the common select inputs, S0 and S1. When the enable inputs (1E, 2E) are high, the outputs are in the low logic state. The HCTS153MS utilizes adv

Radiation Hardened Dual 4-Input Multiplexer

Description The Intersil HCTS153MS is a Radiation Hardened dual 4-to-1 line selector/multiplexer which selects one of four sources for each section by the common select inputs, S0 and S1. When the enable inputs (1E, 2E) are high, the outputs are in the low logic state. The HCTS153MS utilizes adv

Radiation Hardened Dual 4-Input Multiplexer

Features • 3 Micron Radiation Hardened SOS CMOS • Total Dose 200K RAD (Si) • SEP Effective LET No Upsets: >100 MEV-cm2/mg • Single Event Upset (SEU) Immunity 1 x 1012 RAD (Si)/s • Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse • Lat

ROD SEALS

DESCRIPTION The BECA 151 - 153 - 155 profiles are double acting composite rod seals composed of a filled PTFE friction ring and pre-tightened rubber O'Ring. They can be assembled in grooves according to standard ISO 7425/2. Option of connecting the seal to 1 or 2 back-up rings. APPLIC

15 SERIES MOULDED CASE CURRENT TRANSFORMERS

DESCRIPTION Two small moulded case current transformers suitable for primary currents from 1A to 500A using cable or bar primaries APPLICATION For use where space is limited within the panel, and where a built in choice of fixing methods is required. FEATURES • Three built in fixing metho

RENESAS MCU

文件：945.84 Kbytes Page：149 Pages

INTERCONNECT BATTERY HOLDERS

文件：355.08 Kbytes Page：1 Pages

Breadboarding wire bundle

文件：273.66 Kbytes Page：1 Pages