Radiation Hardened Inverting 3-to-8 Line Decoder/Demultiplexer

Description The Intersil HCS138MS is a Radiation Hardened 3-to-8 line Decoder/Demultiplexer. The outputs are active in the low state. Two active low and one active high enables (E1, E2, E3) are provided. If the device is enabled, the binary inputs (A0, A1, A2) determine which one of the eight nor

Radiation Hardened Inverting3-to-8 Line Decoder/Demultiplexer

Features • 3 Micron Radiation Hardened SOS CMOS • Total Dose 200K RAD (Si) • SEP Effective LET No Upsets: >100 MEV-cm2/mg • Single Event Upset (SEU) Immunity

Radiation Hardened Inverting 3-to-8 Line Decoder/Demultiplexer

Description The Intersil HCS138MS is a Radiation Hardened 3-to-8 line Decoder/Demultiplexer. The outputs are active in the low state. Two active low and one active high enables (E1, E2, E3) are provided. If the device is enabled, the binary inputs (A0, A1, A2) determine which one of the eight nor

Radiation Hardened Inverting 3-to-8 Line Decoder/Demultiplexer

Intersil‘s Satellite Applications FlowTM (SAF) devices are fully tested and guaranteed to 100kRAD total dose. These QML Class T devices are processed to a standard flow intended to meet the cost and shorter lead-time needs of large volume satellite manufacturers, while maintaining a high level of

Radiation Hardened Inverting 3-to-8 Line Decoder/Demultiplexer

文件：306.91 Kbytes Page：9 Pages

Radiation Hardened Inverting 3-to-8 Line Decoder/Demultiplexer

Radiation Hardened Inverting 3-to-8 Line Decoder/Demultiplexer

Plastic Medium Power Silicon PNP Transistor

1.5 AMPERE POWER TRANSISTORS PNP SILICON 45, 60, 80 VOLTS 10 WATTS . . . designedfor use as audio amplifiers and drivers utilizing complementary or quasi complementary circuits. • DC Current Gain — hFE= 40 (Min) @ IC= 0.15 Adc • BD 136, 138, 140 are complementary with BD 135, 137, 139

L-BAND SPDT SWITCH

DESCRIPTION The UPG137GV and UPG138GV are L-Band Single Pole Double Throw (SPDT) GaAs MMIC switches developed for digital cellular, PCS, and WLAN applications. These devices feature wide bandwidth, low insertion loss, and high P1dB. The UPG137GV operates on a +3 to +5 V control voltage, while the

L-BAND SPDT SWITCH

DESCRIPTION The UPG137GV and UPG138GV are L-Band Single Pole Double Throw (SPDT) GaAs MMIC switches developed for digital cellular, PCS, and WLAN applications. These devices feature wide bandwidth, low insertion loss, and high P1dB. The UPG137GV operates on a +3 to +5 V control voltage, while the

L-BAND SPDT SWITCH

DESCRIPTION The UPG137GV and UPG138GV are L-Band Single Pole Double Throw (SPDT) GaAs MMIC switches developed for digital cellular, PCS, and WLAN applications. These devices feature wide bandwidth, low insertion loss, and high P1dB. The UPG137GV operates on a +3 to +5 V control voltage, while the

L-BAND DPDT MMIC SWITCH

DESCRIPTION The µPG139GV is L-Band Double Pole, Double Throw (DPDT) switch developed for digital cellular or cordless telephone and PCS applications. This device feature low insertion loss, high handling power with low voltage operation. It is housed in a very small 8-pin plastic SSOP package ava