Make & Break Load Switching

文件：368.99 Kbytes Page：1 Pages

包装：散装 描述：RELAY GEN PURPOSE SPDT 8A 26.5V 继电器 功率继电器，高于 2 A

包装：散装 描述：RELAY GEN PURPOSE SPDT 8A 26.5V 继电器 功率继电器，高于 2 A

Hybrid Assemblies OPTIC RECEIVER MODULES

Hybrid Assemblies OPTIC RECEIVER MODULES

Hybrid Assemblies OPTIC RECEIVER MODULES

Hybrid Assemblies OPTIC RECEIVER MODULES

EIA/ITU PABX SLIC with 30mA Loop Feed

The Intersil SLIC incorporates many of the BORSHT functions on a single IC chip. This includes DC battery feed, a ring relay driver, supervisory and hybrid functions. This device is designed to maintain transmission performance in the presence of externally induced longitudinal currents. Using the

EIA/ITU PABX SLIC with 30mA Loop Feed

Features • Capable of 12V or 5V (VB+) Operation • Monolithic Integrated Device • DI High Voltage Process • Compatible With Worldwide PBX Performance Requirements • Controlled Supply of Battery Feed Current for Short Loops (30mA) • Internal Ring Relay Driver • Low Power Consumption During

SLIC Subscriber Line Interface Circuit

The Intersil SLIC incorporates many of the BORSHT function on a single IC chip. This includes DC battery feed, a ring relay driver, supervisory and hybrid functions. This device is designed to maintain transmission performance in the presence of externally induced longitudinal currents. Using the

ITU Low Cost, PABX SLIC With 40mA Loop Feed

The Intersil SLIC incorporates many of the BORSHT functions on a single IC chip. This includes DC battery feed, a ring relay driver, supervisory and hybrid functions. This device is designed to maintain transmission performance in the presence of externally induced longitudinal currents. Using the

EIA/ITU PABX SLIC with 40mA Loop Feed

The Intersil SLIC incorporates many of the BORSHT functions on a single IC chip. This includes DC battery feed, a ring relay driver, supervisory and hybrid functions. This device is designed to maintain transmission performance in the presence of externally induced longitudinal currents. Using the

EIA/ITU PABX SLIC with 40mA Loop Feed

The Intersil SLIC incorporates many of the BORSHT functions on a single IC chip. This includes DC battery feed, a ring relay driver, supervisory and hybrid functions. This device is designed to maintain transmission performance in the presence of externally induced longitudinal currents. Using the

ITU Low Cost, PABX SLIC With 40mA Loop Feed

The Intersil SLIC incorporates many of the BORSHT functions on a single IC chip. This includes DC battery feed, a ring relay driver, supervisory and hybrid functions. This device is designed to maintain transmission performance in the presence of externally induced longitudinal currents. Using the

ITU Low Cost, PABX SLIC With 40mA Loop Feed

Features • Low Cost Version of the HC-5504B • Capable of 5V or 12V (VB+) Operation • Monolithic Integrated Device • DI High Voltage Process • Compatible With Worldwide PBX Performance Requirements • Controlled Supply of Battery Feed Current for Short Loops (41mA) • Internal Ring Relay Dri

SLIC Subscriber Line Interface Circuit

Description The Intersil SLIC incorporates many of the BORSHT functions on a single IC chip. This includes DC battery feed, a ring relay driver, supervisory and hybrid functions. This device is designed to maintain transmission performance in the presence of externally induced longitudinal curren

SLIC Subscriber Line Interface Circuit

Description The HC-5509A1 telephone Subscriber Line Interface Circuit integrates most of the BORSCHT functions on a monolithic IC. The device is manufactured in a Dielectric Isolation (DI) process and is designed for use as a high voltage interface between the traditional telephone subscriber pai

SLIC Subscriber Line Interface Circuit

The HC-5509B telephone Subscriber Line Interface Circuit integrates most of the BORSCHT functions on a monolithic IC. The device is manufactured in a Dielectric Isolation (DI) process and is designed for use as a high voltage interface between the traditional telephone subscriber pair (Tip and Rin

ITU CO/Loop Carrier SLIC

The HC-5509B telephone Subscriber Line Interface Circuit integrates most of the BORSCHT functions on a monolithic IC. The device is manufactured in a Dielectric Isolation (DI) process and is designed for use as a high voltage interface between the traditional telephone subscriber pair (Tip and Rin

ITU CO/Loop Carrier SLIC

The HC-5509B telephone Subscriber Line Interface Circuit integrates most of the BORSCHT functions on a monolithic IC. The device is manufactured in a Dielectric Isolation (DI) process and is designed for use as a high voltage interface between the traditional telephone subscriber pair (Tip and Rin

SLIC Subscriber Line Interface Circuit

The HC-5509B telephone Subscriber Line Interface Circuit integrates most of the BORSCHT functions on a monolithic IC. The device is manufactured in a Dielectric Isolation (DI) process and is designed for use as a high voltage interface between the traditional telephone subscriber pair (Tip and Rin

SLIC Subscriber Line Interface Circuit

Description The HC-5509B3999-003 telephone Subscriber Line Interface Circuit integrates most of the BORSCHT functions on a monolithic IC. The device is manufactured in a Dielectric Isolation (DI) process and is designed for use as a high voltage interface between the traditional telephone subscri

EIA/ITU 24V PABX SLIC with 25mA Loop Feed

The HC-5524 telephone Subscriber Line Interface Circuit integrates most of the BORSCHT functions on a monolithic IC. The device is manufactured in a Dielectric Isolation (DI) process and is designed for use as a 24V interface between the traditional telephone subscriber pair (Tip and Ring) and the

Continuously Variable Slope Delta-Demodulator (CVSD)

Description The HC-55536 is a CMOS integrated circuit used to convert serial NRZ digital data to an analog (voice) signal. Conversion is by delta demodulation, using the Continuously Variable Slope (CVSD) method of demodulation. Features • All Digital • Requires Few External Parts • Low Power

Continuously Variable Slope Delta-Modulator (CVSD)

Description The HC-55564 is a half duplex modulator/demodulator CMOS intergrated circuit used to convert voice signals into serial NRZ digital data and to reconvert that data into voice. The conversion is by delta-modulation, using the Continuously Variable Slope (CVSD) method of modulation/demod

Continuously Variable Slope Delta-Modulator (CVSD)

The HC-55564/883 is a half duplex modulator/demodulator CMOS intergrated circuit used to convert voice signals into serial NRZ digital data and to reconvert that data into voice. The conversion is by delta-modulation, using the Continuously Variable Slope (CVSD) method of modulation/demodulation.

Continuously Variable Slope Delta-Modulator (CVSD)

The HC-55564/883 is a half duplex modulator/demodulator CMOS intergrated circuit used to convert voice signals into serial NRZ digital data and to reconvert that data into voice. The conversion is by delta-modulation, using the Continuously Variable Slope (CVSD) method of modulation/demodulation.

Continuously Variable Slope Delta-Modulator (CVSD)

The HC-55564/883 is a half duplex modulator/demodulator CMOS intergrated circuit used to convert voice signals into serial NRZ digital data and to reconvert that data into voice. The conversion is by delta-modulation, using the Continuously Variable Slope (CVSD) method of modulation/demodulation.

PCM Transcoder

PCM Transcoder The HC-5560 digital line transcoder provides encoding and decoding of pseudo ternary line code substitution schemes. Unlike other industry standard transcoders, the HC-5560 provides four worldwide compatible mode selectable code substitution schemes, including HDB3 (High Densit

PCM Transcoder

Features • Single 5V Supply . . . . . . . . . . . . . . . . . . . . . . 10mA (Typ) • Mode Selectable Coding Including: - AMI (T1, T1C) - B8ZS (T1) - HDB3 (PCM30) • North American and European Compatibility • Simultaneous Encoding and Decoding • Asynchronous Operation • Loop Back Control

Hybrid Assemblies OPTIC RECEIVER MODULES

Hybrid Assemblies OPTIC RECEIVER MODULES

压线端子胶壳

线对板/线对线连接器

压线端子胶壳

Make & Break Load Switching

文件：368.99 Kbytes Page：1 Pages

Make & Break Load Switching

文件：368.99 Kbytes Page：1 Pages

Crystals Referencing to UTE C 93-611 Standard

文件：199.58 Kbytes Page：1 Pages

Crystals Referencing to UTE C 93-611 Standard

文件：199.58 Kbytes Page：1 Pages

Crystals Referencing to UTE C 93-611 Standard

文件：199.58 Kbytes Page：1 Pages

HIGH RELIABILITY FOR LOW COST

文件：66.02 Kbytes Page：1 Pages

49U.49T 50U Series : HC-49U HC-40T HC-50U Quartz Crystal

文件：157.6 Kbytes Page：1 Pages

MICROPROCESSOR CRYSTAL UNITS

文件：250.43 Kbytes Page：3 Pages

DIN 72X72 Digital Counter

文件：1.49313 Mbytes Page：4 Pages

MICROPROCESSOR CRYSTAL UNITS

文件：250.43 Kbytes Page：3 Pages

Metal packaged low frequency Crystal Low frequency

文件：94.78 Kbytes Page：1 Pages

HIGH RELIABILITY FOR LOW COST

文件：78.31 Kbytes Page：1 Pages

DIN 72X72 Digital Counter

文件：1.49313 Mbytes Page：4 Pages

EIA/ITU PABX SLIC with 30mA Loop Feed

文件：603.06 Kbytes Page：11 Pages

EIA/ITU PABX SLIC with 30mA Loop Feed

文件：603.06 Kbytes Page：11 Pages

EIA/ITU PABX SLIC with 40mA Loop Feed

文件：222.74 Kbytes Page：9 Pages

EIA/ITU PABX SLIC with 40mA Loop Feed

文件：482.83 Kbytes Page：9 Pages

EIA/ITU PABX SLIC with 40mA Loop Feed

文件：222.74 Kbytes Page：9 Pages

ITU Low Cost, PABX SLIC With 40mA Loop Feed

文件：558.12 Kbytes Page：10 Pages

ITU Low Cost, PABX SLIC With 40mA Loop Feed

文件：558.12 Kbytes Page：10 Pages

PCM Transcoder

文件：388.3 Kbytes Page：10 Pages

PCM Transcoder

文件：388.3 Kbytes Page：10 Pages

Make & Break Load Switching

文件：368.99 Kbytes Page：1 Pages

Make & Break Load Switching

文件：368.99 Kbytes Page：1 Pages

DIN 72X72 Digital Counter

文件：1.49313 Mbytes Page：4 Pages