ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS

PRODUCT DESCRIPTION The GP Series is a line of miniature DC to HV DC converters providing 100V to 6kV, positive or negative in a compact PC mount package. This line features low power consumption, making it ideal for portable, battery powered applications. The isolated output is proportional to t

Packaging Information

文件：240.77 Kbytes Page：9 Pages

Packaging Information

Alarm Indicating Fuses

2 AMP SOFT GLASS PASSIVATED DIODES

FEATURES PROPRIETARY SOFT GLASS JUNCTION PASSIVATION FOR SUPERIOR RELIABILITY AND PERFORMANCE VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical

120...195 Watt DC-DC Converters

120...195 Watt DC-DC Converters Input voltage up to 150 V DC 1 to 4 isolated outputs 3.3...96 V DC 4242V DC I/O electric strength test voltage • Extremely slim case (4 TE), fully enclosed • Extremely low inrush current, hot swappable • Operating ambient temperature range –40..

Half Bridge IGBT Module

The Powerline range of high power modules includes half bridge and single switch configurations covering voltages from 600V to 3300V and currents up to 4800A. The GP200MHS12 is a half bridge 1200V, n channel enhancement mode, insulated gate bipolar transistor (IGBT) module. The IGBT has a wide re

Half Bridge IGBT Module

The Powerline range of high power modules includes half bridge, dual and single switch configurations covering voltages from 600V to 3300V and currents up to 4800A. FEATURES ■ Non Punch Through Silicon ■ Isolated Copper Baseplate ■ Low Inductance Internal Construction ■ 200A Per A

IGBT Chopper Module Preliminary Information

The Powerline range of high power modules includes half bridge, dual and single switch configurations covering voltages from 600V to 3300V and currents up to 2400A. The GP200MLS12 is a 1200V, n channel enhancement mode, insulated gate bipolar transistor (IGBT) chopper module configured with the u

IGBT Chopper Module Preliminary Information

The Powerline range of high power modules includes half bridge, dual and single switch configurations covering voltages from 600V to 3300V and currents up to 2400A. The GP200MLS12 is a 1200V, n channel enhancement mode, insulated gate bipolar transistor (IGBT) chopper module configured with the l

2 AMP SOFT GLASS PASSIVATED DIODES

FEATURES PROPRIETARY SOFT GLASS JUNCTION PASSIVATION FOR SUPERIOR RELIABILITY AND PERFORMANCE VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical

GPS Receiver RF Front End

The GP2010 is Mitel Semiconductor second generation RF Front-end for Global Positioning System (GPS) receivers. The GP2010 uses many innovative design techniques and a leading-edge bipolar process to offer a low power, low cost and high reliability RF Front End solution . The GP2010 is designed to

SMD Type Green Emitter

Features  Top view 0805 package  Viewing Angle = 70  Compatible with infrared and vapor phase reflow solder process  High reliability  Ultra bright Green  RoHS compliance Applications  Optical indicator.  Switch and Symbol Display. Description The GP201208ATC3 is an AlGaInP

SMD Type Green Emitter

Features  Top view 0805 package  Viewing Angle = 70  Compatible with infrared and vapor phase reflow solder process  High reliability  Ultra bright Green  RoHS compliance Applications  Optical indicator.  Switch and Symbol Display. Description The GP201208-CTC3 is an AlGaIn

GPS Receiver RF Front End

The GP2015 is a small format RF Front-end for Global Positioning System (GPS) receivers. Equivalent in performance to the GP2010 but in a TQFP package, this product is suited for size-critical applications as the RF area can be reduced by a factor of two to three using miniature surface mount pass

Low VCE(SAT) Half Bridge IGBT Module

The Powerline range of high power modules includes half bridge, dual and single switch configurations covering voltages from 600V to 3300V and currents up to 4800A. FEATURES ■ Low VCE(SAT) ■ Non Punch Through Silicon ■ Isolated Copper Baseplate ■ Low Inductance Internal Constructi

2 AMP SOFT GLASS PASSIVATED DIODES

FEATURES PROPRIETARY SOFT GLASS JUNCTION PASSIVATION FOR SUPERIOR RELIABILITY AND PERFORMANCE VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical

GPS 12 channel Correlator Advance Information

The GP2021 is a 12 channel C/A code baseband correlator for use in NAVSTAR GPS and GLONASS satellite navigation receivers. The GP2021 complements the GP2015 and GP2010 C/A code RF downconverters available from Mitel Semiconductor. FEATURES ■ 12 Fully Independent Correlation Channels ■ 1PPS UTC

2 AMP SOFT GLASS PASSIVATED DIODES

FEATURES PROPRIETARY SOFT GLASS JUNCTION PASSIVATION FOR SUPERIOR RELIABILITY AND PERFORMANCE VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical

2 AMP SOFT GLASS PASSIVATED DIODES

FEATURES PROPRIETARY SOFT GLASS JUNCTION PASSIVATION FOR SUPERIOR RELIABILITY AND PERFORMANCE VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical

2 AMP SOFT GLASS PASSIVATED DIODES

FEATURES PROPRIETARY SOFT GLASS JUNCTION PASSIVATION FOR SUPERIOR RELIABILITY AND PERFORMANCE VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical

SINTERED GLASS PASSIVATED JUNCTION RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Amperes FEATURES * GPRC (Glass Passivated Rectifier Chip) inside * Glass passivated cavity-free junction * Capable of meeting environmental standards of MIL-S-19500 * 2.0 Amperes operation at TA=55°C with no thermal runaway

GLASS PASSIVATED JUNCTION RECTIFIER

GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 600 Volts Forward Current - 2.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free

2.0 Amp Glass Passivated Junction Rectifiers 50 to 1000 Volts

Features · High temperature metallurgically bonded construction · Glass passivated cavity-free junction, Plastic Case · 2.0 amperes operation at T A=55OC and with no thermal runaway. · Typical IR less than 0.1uA

2.0 AMPS. Glass Passivated Junction Plastic Rectifiers

Features High temperature metallurgically bonded construction Plastic material used carries Underwriters Laboratory Classification 94V-O Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 2.0 amperes operation at TA=55oC and with no

2.0A Sintered Glass Passivated Rectifier

2.0A Sintered Glass Passivated Rectifier Features • Sintered glass passivated (SGP) rectifier chip • Capable of meeting environmental standards of MIL-S-19500 • 2.0A operation at TA=55° C with no thermal runaway • High temperature soldering guaranteed:260°C/10 seconds/.0375 (9.5mm

2.0Amp glass passivated junction rectifiers 50to1000 volts

Features · High temperature metallurgically bonded construction · Glass passivated cavity-free junction, Plastic Case · 2.0 amperes operation at TA=55OC and with no thermal runaway. · Typical IR less than 0.1uA

SINTERED GLASS JUNCTION PLASTIC RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 2.0A

SINTERED GLASS JUNCTION PLASTIC RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 2.0A FEATURE High temperature metallurgically bonded construction Sintered glass cavity free junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 350°C /

Glass Passivated Junction Rectifier

FEATURES • Superectifier structure for high reliability application • Cavity-free glass-passivated junction • Low forward voltage drop • Low leakage current, IR less than 0.1 μA • High forward surge capability • Meets environmental standard MIL-S-19500 • Solder dip 275 °C max.

GENERAL PURPOSE PLASTIC RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current -2.0Amperes FEATURES • GPRC(Glass Passivated Rectifier Chip) inside • Glass passivated cavity-free junction • Capable of meeting environmental standards of MIL-S-19500 • 2.0Ampere operation at Ta=75°C and 55°C with no thermal r

2.0A Axial Leaded Sintered Glass Passivated Rectifier

Features • Sintered glass passivated (SGP) rectifier chip • Capable of meeting environmental standards of MIL-S-19500 • 2.0A operation at TA=55° C with no thermal runaway • High temperature soldering guaranteed: 260°C/10 seconds/.0375 (9.5mm) lead length, 5lbs (2.3kg) tension • RoHS

GLASS PASSIVATED JUNCTION RECTIFIER

FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ 1.5 Ampere operation at TA=55°C

SINTERED GLASS PASSIVATED JUNCTION RECTIFIER

SINTERED GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Amperes FEATURES * Halogen-free type * GPRC (Glass Passivated Rectifier Chip) inside * Glass passivated cavity-free junction * Capable of meeting environmental standards of MIL

SINTERED GLASS PASSIVATED JUNCTION RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Amperes FEATURES * GPRC (Glass Passivated Rectifier Chip) inside * Glass passivated cavity-free junction * Capable of meeting environmental standards of MIL-S-19500 * 2.0 Amperes operation at TA=55°C with no thermal runaway

GLASS PASSIVATED JUNCTION RECTIFIER

GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 600 Volts Forward Current - 2.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free

2.0 Amp Glass Passivated Junction Rectifiers 50 to 1000 Volts

Features · High temperature metallurgically bonded construction · Glass passivated cavity-free junction, Plastic Case · 2.0 amperes operation at T A=55OC and with no thermal runaway. · Typical IR less than 0.1uA

2.0 AMPS. Glass Passivated Junction Plastic Rectifiers

Features High temperature metallurgically bonded construction Plastic material used carries Underwriters Laboratory Classification 94V-O Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 2.0 amperes operation at TA=55oC and with no

2.0A Sintered Glass Passivated Rectifier

2.0A Sintered Glass Passivated Rectifier Features • Sintered glass passivated (SGP) rectifier chip • Capable of meeting environmental standards of MIL-S-19500 • 2.0A operation at TA=55° C with no thermal runaway • High temperature soldering guaranteed:260°C/10 seconds/.0375 (9.5mm

SINTERED GLASS JUNCTION PLASTIC RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 2.0A

SINTERED GLASS JUNCTION PLASTIC RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 2.0A FEATURE High temperature metallurgically bonded construction Sintered glass cavity free junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 350°C /

GENERAL PURPOSE PLASTIC RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current -2.0Amperes FEATURES • GPRC(Glass Passivated Rectifier Chip) inside • Glass passivated cavity-free junction • Capable of meeting environmental standards of MIL-S-19500 • 2.0Ampere operation at Ta=75°C and 55°C with no thermal r

2.0Amp glass passivated junction rectifiers 50to1000 volts

Features · High temperature metallurgically bonded construction · Glass passivated cavity-free junction, Plastic Case · 2.0 amperes operation at TA=55OC and with no thermal runaway. · Typical IR less than 0.1uA

Glass Passivated Junction Rectifier

FEATURES • Superectifier structure for high reliability application • Cavity-free glass-passivated junction • Low forward voltage drop • Low leakage current, IR less than 0.1 μA • High forward surge capability • Meets environmental standard MIL-S-19500 • Solder dip 275 °C max.

2.0A Axial Leaded Sintered Glass Passivated Rectifier

Features • Sintered glass passivated (SGP) rectifier chip • Capable of meeting environmental standards of MIL-S-19500 • 2.0A operation at TA=55° C with no thermal runaway • High temperature soldering guaranteed: 260°C/10 seconds/.0375 (9.5mm) lead length, 5lbs (2.3kg) tension • RoHS

GLASS PASSIVATED JUNCTION RECTIFIER

FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ 1.5 Ampere operation at TA=55°C

SINTERED GLASS PASSIVATED JUNCTION RECTIFIER

SINTERED GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Amperes FEATURES * Halogen-free type * GPRC (Glass Passivated Rectifier Chip) inside * Glass passivated cavity-free junction * Capable of meeting environmental standards of MIL

SINTERED GLASS PASSIVATED JUNCTION RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Amperes FEATURES * GPRC (Glass Passivated Rectifier Chip) inside * Glass passivated cavity-free junction * Capable of meeting environmental standards of MIL-S-19500 * 2.0 Amperes operation at TA=55°C with no thermal runaway

GLASS PASSIVATED JUNCTION RECTIFIER

GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 600 Volts Forward Current - 2.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free

2.0 Amp Glass Passivated Junction Rectifiers 50 to 1000 Volts

Features · High temperature metallurgically bonded construction · Glass passivated cavity-free junction, Plastic Case · 2.0 amperes operation at T A=55OC and with no thermal runaway. · Typical IR less than 0.1uA

2.0Amp glass passivated junction rectifiers 50to1000 volts

Features · High temperature metallurgically bonded construction · Glass passivated cavity-free junction, Plastic Case · 2.0 amperes operation at TA=55OC and with no thermal runaway. · Typical IR less than 0.1uA

2.0A Sintered Glass Passivated Rectifier

2.0A Sintered Glass Passivated Rectifier Features • Sintered glass passivated (SGP) rectifier chip • Capable of meeting environmental standards of MIL-S-19500 • 2.0A operation at TA=55° C with no thermal runaway • High temperature soldering guaranteed:260°C/10 seconds/.0375 (9.5mm

SINTERED GLASS JUNCTION PLASTIC RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 2.0A

SINTERED GLASS JUNCTION PLASTIC RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 2.0A FEATURE High temperature metallurgically bonded construction Sintered glass cavity free junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 350°C /

GENERAL PURPOSE PLASTIC RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current -2.0Amperes FEATURES • GPRC(Glass Passivated Rectifier Chip) inside • Glass passivated cavity-free junction • Capable of meeting environmental standards of MIL-S-19500 • 2.0Ampere operation at Ta=75°C and 55°C with no thermal r

Glass Passivated Junction Rectifier

FEATURES • Superectifier structure for high reliability application • Cavity-free glass-passivated junction • Low forward voltage drop • Low leakage current, IR less than 0.1 μA • High forward surge capability • Meets environmental standard MIL-S-19500 • Solder dip 275 °C max.

2.0 AMPS. Glass Passivated Junction Plastic Rectifiers

Features High temperature metallurgically bonded construction Plastic material used carries Underwriters Laboratory Classification 94V-O Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 2.0 amperes operation at TA=55oC and with no

GLASS PASSIVATED JUNCTION RECTIFIER

FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ 1.5 Ampere operation at TA=55°C

2.0A Axial Leaded Sintered Glass Passivated Rectifier

Features • Sintered glass passivated (SGP) rectifier chip • Capable of meeting environmental standards of MIL-S-19500 • 2.0A operation at TA=55° C with no thermal runaway • High temperature soldering guaranteed: 260°C/10 seconds/.0375 (9.5mm) lead length, 5lbs (2.3kg) tension • RoHS

SINTERED GLASS PASSIVATED JUNCTION RECTIFIER

SINTERED GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Amperes FEATURES * Halogen-free type * GPRC (Glass Passivated Rectifier Chip) inside * Glass passivated cavity-free junction * Capable of meeting environmental standards of MIL

Low VF Rectifier Diode

FEATURES * GPRC (Glass passivated rectifier chip) inside * Glass passivated cavity-free junction * Compliance to RoHS product * Low forward voltage drop * 2.0 Ampere operation at TA=55oC with no thermal runaway * Plastic package has Underwriters Laboratory Flammability Classifica

Low VF Rectifier Diode

FEATURES * GPRC (Glass passivated rectifier chip) inside * Glass passivated cavity-free junction * Compliance to RoHS product * Low forward voltage drop * 2.0 Ampere operation at TA=55oC with no thermal runaway * Plastic package has Underwriters Laboratory Flammability Classifica

GLASS PASSIVATED JUNCTION RECTIFIER

GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 600 Volts Forward Current - 2.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free