Dual Rail-to-Rail Operational Amplifiers

文件：651.85 Kbytes Page：1 Pages

Operational Amplifier

Integrared Circuit AM Tuner, AM/FM IF Amp

Description: The NTE1563 is a silicon monolithic integrated circuit in a 16–Lead DIP type package designed for AM/FM radios and cassette tape recorders with an AM/FM radio. The NTE1563 contains an AM tuner and FM–IF amplifiers. Features: • Wide Operating Voltage: VCC = 2.5V to 6.0V •

VERY LOW DROPOUT, LOW QUIESCENT 500mA REGULATOR

Description The SC1563 is a high performance positive voltage regulator designed for use in applications requiring very low dropout voltage at up to 500mA. Since it has superior dropout characteristics compared to regular LDOs, it can be used to supply 2.5V on motherboards or 2.8V on peripheral

RF & MICROWAVE TRANSISTORS UHF PULSED APPLICATIONS

DESCRIPTION The SD1563 is a gold metallized silicon NPN pulse power transistor. The SD1563 is designed for applications requiring high peak power and low duty cycles within the frequency range of 400 - 500 MHz. ■ 350 WATTS @ 10µSEC PULSE WIDTH, 10 DUTY CYCLE ■ 300 WATTS @ 250µSEC PULSE WIDTH, 1

2 x 25 W high efficiency car radio power amplifier

GENERAL DESCRIPTION The TDA1563Q is a monolithic power amplifier in a 17-lead DIL-bent-SIL plastic power package. It contains two identical 25 W amplifiers. The dissipation is minimized by switching from SE to BTL mode when a higher output voltage swing is needed. The device is primarily develo

2 x 25 W high efficiency car radio power amplifier

GENERAL DESCRIPTION The TDA1563Q is a monolithic power amplifier in a 17-lead DIL-bent-SIL plastic power package. It contains two identical 25 W amplifiers. The dissipation is minimized by switching from SE to BTL mode when a higher output voltage swing is needed. The device is primarily develo