Fully integrated Light-barrier Driver & Receiver with 2-Wire Bus Interface

The epc 111 / epc112 is a general purpose, fully integrated self-contained CMOS circuit family to be used in light-barrier applications. The chip contains a controller which drives an LED, typically an IR-LED. The LED is used in pulsed mode to increase the signal-to-noise ratio even when very strong

Fully integrated Light-Barrier Chips with 2-Wire Bus Interface

文件：558.2 Kbytes Page：27 Pages

Fully integrated Light-Barrier Chips with 2-Wire Bus Interface

文件：558.2 Kbytes Page：27 Pages

Fully integrated Light-Barrier Chips with 2-Wire Bus Interface

文件：558.2 Kbytes Page：27 Pages

ULTRAFAST RECTIFIERS 1.0 AMPERE 200-400-600 VOLTS

SWITCHMODE™ Power Rectifiers . . . designed for use in switching power supplies, inverters and as free wheeling diodes, these state–of–the–art devices have the following features: • Ultrafast 25, 50 and 75 Nanosecond Recovery Times • 175°C Operating Junction Temperature • Low Forward Voltage

ZENER DIODES 200 mW 2 PINS SUPER MINI MOLD

DESCRIPTION Type RD2.0S to RD120S Series are 2 PIN Super Mini Mold Package zener diodes possessing an allowable power dissipation of 200 mW. FEATURES • Sharp Breakdown characteristic. • Vz: Applied E24 standard. APPLICATIONS Circuit for Constant Voltage, Constant Current, W

MOSORB ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS

The SA5.0A series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The SA5.0A series is supplied in Motorola’s exclusive, cost-effective, highly

DARLINGTON 5 AMPERE COMPLEMENTARY SILICON POWER TRANSISTORS

Plastic Medium-Power Complementary Silicon Transistors . . . designed for general–purpose amplifier and low–speed switching applications. • High DC Current Gain — hFE = 2500 (Typ) @ IC = 4.0 Adc • Collector–Emitter Sustaining Voltage — @ 100 mAdc VCEO(sus) = 60 Vdc (Min) — TIP12

POWER TRANSISTORS(5.0A,60-100V,65W)

designed for general−purpose amplifier and low−speed switching applications. FEATURES: • Collector−Emitter Sustaining Voltage − VCEO(sus) = 60 V (Min) − TIP120, TIP125 = 80 V (Min) − TIP121, TIP126 = 100 V (Min) − TIP122, TIP127 • Low Coll