USB Power Delivery (PD) controller which is compliant with USB Power Delivery Specification Revision 2.0

EJ898N is a USB Power Delivery (PD) controller which is compliant with USB Power Delivery Specification Revision 2.0. The PD controller can negotiate voltage, current and direction with PD link partner to transfer up to 100W of power over Type-C connector and cable.\n\nEJ898N can be configured by se \n• USB Power Delivery Specification\n• Support PD provider mode\n• Support all PD profile 0~5\n• Support baseband BMC coding for USB Type-C specification\n• Support detection of connection on Configuration Channel\n• Support Vconn power switch control\n• Pull-up/Pull-down resistor (Rp/Rd) integrate;

PNP SILICON POWER DARLINGTONS

PNP SILICON POWER DARLINGTONS ● Designed for Complementary Use with BD895, BD897, BD899 and BD901 ● 70 W at 25°C Case Temperature ● 8 A Continuous Collector Current ● Minimum hFE of 750 at 3V, 3A

PNP SILICON POWER DARLINGTONS

PNP SILICON POWER DARLINGTONS ● Designed for Complementary Use with BD895, BD897, BD899 and BD901 ● 70 W at 25°C Case Temperature ● 8 A Continuous Collector Current ● Minimum hFE of 750 at 3V, 3A

PNP SILICON POWER DARLINGTONS

PNP SILICON POWER DARLINGTONS ● Designed for Complementary Use with BD895A, BD897A and BD899A ● 70 W at 25°C Case Temperature ● 8 A Continuous Collector Current ● Minimum hFE of 750 at 3V, 3A

UHF linear power transistor

DESCRIPTION NPN silicon planar transistor in a SOT171A 6-lead rectangular flange package, with a ceramic cap. The transistor delivers a Po sync = 3 W in class-A operation at 860 MHz and a supply voltage of 25 V. FEATURES • Internal input matching for wideband operation and high power ga

RF POWER TRANSISTOR NPN SILICON

The RF Line NPN Silicon RF Power Transistor . . . designed for 24 Volt UHF large–signal, common base amplifier applications in industrial and commercial FM equipment operating in the range of 850–960 MHz. • Motorola Advanced Amplifier Concept Package • Specified 24 Volt, 900 MHz Characteristi