3.3V and 5.0V MicroMonitor

DESCRIPTION The DS1705/DS1706 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, software execution, and external override. A precision temperature compensated reference and comparator circuit monitor the status of VCC at the device and at an upstre

3.3 and 5.0 Volt MicroMonitor

DESCRIPTION The DS1705/DS1706 3.3 or 5.0 Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, software execution, and external override. A precision temperature compensated reference and comparator circuit monitors the status of VCC at the device and at an upstrea

3.3V及5.0V MicroMonitor

DS1705/DS1706 3.3或5.0伏MicroMonitor可监控微处理器的三个重要条件：电源、软件执行和外部覆盖。精密的温度补偿基准电压源和比较器电路监控器件和上游点的VCC状态，以实现充分的保护。当检测输入检测到超出容差的条件时，会生成不可屏蔽中断。当器件电压降低时，会生成内部电源故障信号，强制复位为有效状态。当VCC返回到容差范围内的条件时，复位信号将保持有效状态至少130ms，以便电源和处理器稳定下来。\n\n DS1705/DS1706执行的第二个功能是按钮复位控制。DS1705/DS1706对按钮输入进行去抖处理，并确保有效复位脉冲宽度达到130ms（最小值）。\ • 停止并重新启动失控的微处理器\n\n• 在电源瞬变期间对微处理器进行限制\n\n• 发生电源故障后自动重启微处理器\n\n• 监控按钮的外部覆盖情况\n\n• 3.3V系统的复位精度为5%、10%或20%，5.0V系统的复位精度为5%或10%\n\n• 无需分立元件\n\n• 3.3V 20%容差，适用于3.0V系统\n\n• 与MAXIM MAX705/MAX706引脚兼容，采用8引脚DIP、8引脚SO和µSOP封装\n\n• 8引脚DIP、8引脚SO和8引脚µSOP封装\n\n• 工业温度范围：−40°C至+85°C;

3.3V and 5.0V MicroMonitor

DESCRIPTION The DS1705/DS1706 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, software execution, and external override. A precision temperature compensated reference and comparator circuit monitor the status of VCC at the device and at an upstre

3.3V and 5.0V MicroMonitor

DESCRIPTION The DS1705/DS1706 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, software execution, and external override. A precision temperature compensated reference and comparator circuit monitor the status of VCC at the device and at an upstre

3.3V and 5.0V MicroMonitor

DESCRIPTION The DS1705/DS1706 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, software execution, and external override. A precision temperature compensated reference and comparator circuit monitor the status of VCC at the device and at an upstre

3.3V and 5.0V MicroMonitor

DESCRIPTION The DS1705/DS1706 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, software execution, and external override. A precision temperature compensated reference and comparator circuit monitor the status of VCC at the device and at an upstre

3.3V and 5.0V MicroMonitor

DESCRIPTION The DS1705/DS1706 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, software execution, and external override. A precision temperature compensated reference and comparator circuit monitor the status of VCC at the device and at an upstre

3.3V and 5.0V MicroMonitor

DESCRIPTION The DS1705/DS1706 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, software execution, and external override. A precision temperature compensated reference and comparator circuit monitor the status of VCC at the device and at an upstre

封装/外壳：8-DIP（0.300"，7.62mm） 包装：管件 描述：IC SUPERVISOR 1 CHANNEL 8DIP 集成电路（IC） 监控器

电源监控芯片

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 包装：管件 描述：IC SUPERVISOR 1 CHANNEL 8SOIC 集成电路（IC） 监控器

Integrated Circuit VCR Hall Switch

Description: This device operates with a small permanent magnet and provides switching operation by increasing or decreasing the magnetic flux density. The device features operation on alternate magnetic field and a wide range of operating temperature.

SWITCHING N-CHANNEL POWER MOS FET INDUSTRIAL USE

DESCRIPTION This product is N-Channel MOS Field Effect Transistor designed for DC/DC Converters and power management application of notebook computers. FEATURES • Super low on-state resistance RDS(on)1 = 19.0 mΩ TYP. (VGS = 10 V, ID = 4.0 A) RDS(on)2 = 30.0 mΩ TYP. (VGS = 4.5 V, ID =

SWITCHING N-CHANNEL POWER MOS FET INDUSTRIAL USE

DESCRIPTION This product is N-Channel MOS Field Effect Transistor designed for DC/DC Converters and power management application of notebook computers. FEATURES • Super low on-state resistance RDS(on)1 = 19.0 mΩ TYP. (VGS = 10 V, ID = 4.0 A) RDS(on)2 = 30.0 mΩ TYP. (VGS = 4.5 V, ID =

1.5/1.9GHz BAND FRONT-END GaAs MMIC

文件：564.26 Kbytes Page：26 Pages

High Speed Power Driver

文件：298.57 Kbytes Page：11 Pages