SURFACE MOUNT VERY HIGH VOLTAGE SILICON SWITCHING DIODE

文件：117.6 Kbytes Page：2 Pages

SURFACE MOUNT VERY HIGH VOLTAGE SILICON SWITCHING DIODE

文件：117.6 Kbytes Page：2 Pages

SURFACE MOUNT VERY HIGH VOLTAGE SILICON SWITCHING DIODE

SURFACE MOUNT VERY HIGH VOLTAGE SILICON SWITCHING DIODE

文件：117.6 Kbytes Page：2 Pages

SURFACE MOUNT VERY HIGH VOLTAGE SILICON SWITCHING DIODE

文件：117.6 Kbytes Page：2 Pages

ACT7005/7006 Single Package Solution Dual Transceiver, Protocol, Subsystem

General Description The ACT7005/6 Series provides a complete one package interface between the MIL-STD-1553 bus and all microprocessor systems. The hybrid provides all data buffers and control registers to function as a Bus Controller or Remote Terminal. Control of the hybrid by the subsystem i

ACT7005/7006 Single Package Solution Dual Transceiver, Protocol, Subsystem

General Description The ACT7005/6 Series provides a complete one package interface between the MIL-STD-1553 bus and all microprocessor systems. The hybrid provides all data buffers and control registers to function as a Bus Controller or Remote Terminal. Control of the hybrid by the subsystem i

HIGH-SPEED 8K x 8 DUAL-PORT STATIC RAM

DESCRIPTION: The IDT7005 is a high-speed 8K x 8 Dual-Port Static RAM. The IDT7005 is designed to be used as a stand-alone Dual Port RAM or as a combination MASTER/SLAVE Dual-Port RAM for 16-bit-or-more word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach in 16-bit or wider memory sys

Integrated Circuit 2-Phase Stepping Motor Driver

Description: The NTE7005 monolithic power IC is a dual bridge driver in a 16–Lead DIP type package. The maximum driving current and voltage is 330mA x 12V per bridge. Therefore, the best use for this part is in a two–phase bipolar stepping motor driving the head actuator of a 3, to 5.25–inch Fl

5 WATT UNREGULATED DC/DC CONVERTER

DESCRIPTION The PWR70XX Series uses advanced circuit design and packaging technology to realize superior reliability and performance. A 170kHz driven push-pull oscillator is used to ensure stable frequency and non-saturating operation of the input stage. This means there are no high peak voltages