LOW START-UP CURRENT PFC/PWM CONTROLLER COMBO

GENERAL DESCRIPTION The CM6800 is a controller for power factor corrected, switched mode power suppliers. Power Factor Correction (PFC) allows the use of smaller, lower cost bulk capacitors, reduces power line loading and stress on the switching FETs, and results in a power supply that fully co

LOW START-UP CURRENT PFC/PWM CONTROLLER COMBO

6000 Series Full Face Respirators

Main Features The 6000 Series Full Face Respirators are used with twin lightweight filters which are fitted by a simple bayonet attachment system, providing an economical and flexible choice. The Respirators can also be used with the 3M S-200 Supplied-Air System for increased convenience and flex

8-BIT MICROPROCESSING UNIT (MPU)

8-BIT MICROPROCESSING UNIT (MPU) The MC6800 is a monolithic 8-bit microprocessor forming the central control function for Motorola’s M68~ family. Compatible with TTL, the MC6B~, as with all M6800 system parts, requires only one + 5.O-volt power supply, and no external TTL devices for bus interf

F (M/F) Right Angle, F(M/F), F (F/F) Bulkhead, F (F) PCB

Features • True 75 Ω BNC adapters. • Gold-plated (15 micro–inches) contacts. • BNC insulation material is PTFE (not delrin).

DABiC-5 Latched Sink Drivers

DABiC-5 Latched Sink Drivers The A6800 and A6801 latched-input BiMOS ICs merge high-current, high-voltage outputs with CMOS logic. The CMOS input section consists of 4 or 8 data (‘D’ type) latches with associated common CLEAR, STROBE, and OUTPUT ENABLE circuitry. The power outputs are bipolar NPN

0.5mmPitch RA SMT Dual-sided contact One- touch lock

文件：177.66 Kbytes Page：1 Pages