Available with 8 through hole contacts.

Features • Available with 8 through hole contacts. • A normally closed blade switch detects when the card is fully inserted. • Snap in boardlocks hold the connector in place prior to soldering.

Available with 8 contacts

Features • Available with 8 contacts which are designed to give a consistently reliable normal force over the life of the connector. • For added reliability, the card detection switch (which is normally open) is sealed against dust and debris. • Available with through-hole or surface moun

CCM01 MK5 Series

Features/Benefits • Operating life 500,000 cycles • Low profile 4 mm and 3.2 mm height • Card detection sealed switch Typical Applications • Transaction • Identification • POS • MPOS

CCM01 MK5 Series

Features/Benefits • Operating life 500,000 cycles • Low profile 4 mm and 3.2 mm height • Card detection sealed switch Typical Applications • Transaction • Identification • POS • MPOS

CCM01 MK5 Series

Features/Benefits • Operating life 500,000 cycles • Low profile 4 mm and 3.2 mm height • Card detection sealed switch Typical Applications • Transaction • Identification • POS • MPOS

CCM01 MK5 Series

Features/Benefits • Operating life 500,000 cycles • Low profile 4 mm and 3.2 mm height • Card detection sealed switch Typical Applications • Transaction • Identification • POS • MPOS

Available in standard or reverse card

Features • Available in standard or reverse card reading version, with direct PCB soldering for reduced installation cost. • Panel mount version comes with improved noise reduction FPC, to accommodate all front panel configurations. • Double sided version allows the customer to insert the

Available in standard or reverse card

Features • Available in standard or reverse card reading version, with direct PCB soldering for reduced installation cost. • Panel mount version comes with improved noise reduction FPC, to accommodate all front panel configurations. • Double sided version allows the customer to insert the

Available in standard or reverse card

Features • Available in standard or reverse card reading version, with direct PCB soldering for reduced installation cost. • Panel mount version comes with improved noise reduction FPC, to accommodate all front panel configurations. • Double sided version allows the customer to insert the

Available in standard or reverse card

Features • Available in standard or reverse card reading version, with direct PCB soldering for reduced installation cost. • Panel mount version comes with improved noise reduction FPC, to accommodate all front panel configurations. • Double sided version allows the customer to insert the

Available in standard or reverse card

Features • Available in standard or reverse card reading version, with direct PCB soldering for reduced installation cost. • Panel mount version comes with improved noise reduction FPC, to accommodate all front panel configurations. • Double sided version allows the customer to insert the

CCM01 MK4 Series

Features • Operating life up to 600,000 cycles • 40N card insertion force • EMV • Card detection sealed switch

CCM01 MK5 Series

Features/Benefits • Operating life 500,000 cycles • Low profile 4 mm and 3.2 mm height • Card detection sealed switch Typical Applications • Transaction • Identification • POS • MPOS

CCM01 MK5 Series

Features/Benefits • Operating life 500,000 cycles • Low profile 4 mm and 3.2 mm height • Card detection sealed switch Typical Applications • Transaction • Identification • POS • MPOS

Available with 8 through hole contacts.

Features • Available with 8 through hole contacts. • 100,000 card insertion cycles. • The contacts do not touch the card until it is almost fully inserted - a minimal wiping action removes any non-conductive material. • The connector has been designed to give a positive feel as the card i

Available with 8 through hole contacts.

Features • Available with 8 through hole contacts. • 100,000 card insertion cycles. • The contacts do not touch the card until it is almost fully inserted - a minimal wiping action removes any non-conductive material. • The connector has been designed to give a positive feel as the card i

Available with 8 through hole contacts.

Features • Available with 8 through hole contacts. • 100,000 card insertion cycles. • The contacts do not touch the card until it is almost fully inserted - a minimal wiping action removes any non-conductive material. • The connector has been designed to give a positive feel as the card i

500,000 card insertion cycles.

Features • 500,000 card insertion cycles. • The contacts do not touch the card until it is almost fully inserted – A minimal wiping action removes any non-conductive material. • The connector has been designed to give a positive indication once the card has been fully inserted. • The redu

500,000 card insertion cycles.

Features • 500,000 card insertion cycles. • The contacts do not touch the card until it is almost fully inserted – A minimal wiping action removes any non-conductive material. • The connector has been designed to give a positive indication once the card has been fully inserted. • The redu

Demo Board User Manual

The 73S8023C Demo Board is a platform for evaluating the Teridian 73S8023C Smart Card Interface device. The board incorporates the 73S8023C integrated circuit and has been designed to operate either as a standalone platform (to be used in conjunction with an external microcontroller) or as a daugh

500,000 card insertion cycles.

Features • 500,000 card insertion cycles. • The contacts do not touch the card until it is almost fully inserted – A minimal wiping action removes any non-conductive material. • The connector has been designed to give a positive indication once the card has been fully inserted. • The redu

500,000 card insertion cycles.

Features • 500,000 card insertion cycles. • The contacts do not touch the card until it is almost fully inserted – A minimal wiping action removes any non-conductive material. • The connector has been designed to give a positive indication once the card has been fully inserted. • The redu

500,000 card insertion cycles.

Features • 500,000 card insertion cycles. • The contacts do not touch the card until it is almost fully inserted – A minimal wiping action removes any non-conductive material. • The connector has been designed to give a positive indication once the card has been fully inserted. • The redu

500,000 card insertion cycles.

Features • 500,000 card insertion cycles. • The contacts do not touch the card until it is almost fully inserted – A minimal wiping action removes any non-conductive material. • The connector has been designed to give a positive indication once the card has been fully inserted. • The redu

500,000 card insertion cycles.

Features • 500,000 card insertion cycles. • The contacts do not touch the card until it is almost fully inserted – A minimal wiping action removes any non-conductive material. • The connector has been designed to give a positive indication once the card has been fully inserted. • The redu

500,000 card insertion cycles.

Features • 500,000 card insertion cycles. • The contacts do not touch the card until it is almost fully inserted – A minimal wiping action removes any non-conductive material. • The connector has been designed to give a positive indication once the card has been fully inserted. • The redu

500,000 card insertion cycles.

Features • 500,000 card insertion cycles. • The contacts do not touch the card until it is almost fully inserted – A minimal wiping action removes any non-conductive material. • The connector has been designed to give a positive indication once the card has been fully inserted. • The redu

CCM02 MK2 Series

Features • Operating life 500,000 cycles • Insertion force 40N • EMV • PCI & PCI ready • Card detection sealed switch

CCM02 MK2 Series

Features • Operating life 500,000 cycles • Insertion force 40N • EMV • PCI & PCI ready • Card detection sealed switch

CCM03 MK II

Features Hinged Cover • Available with 6 or 8 contacts, with or without PCB locating pegs. • Available with insulated card presence switch. • The cover springs open when unlocked while the card is in place. • The molding is polarized so that the cover can only be closed if the card is correc

CCM03 MK2 Series

Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering Typical Applications • Handheld products • Identification • POS • Automotive

CCM03 MK2 Series

Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering Typical Applications • Handheld products • Identification • POS • Automotive

CCM03 MK2 Series

Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering Typical Applications • Handheld products • Identification • POS • Automotive

CCM03 MK2 Series

Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering Typical Applications • Handheld products • Identification • POS • Automotive

CCM03 MK2 Series

Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering Typical Applications • Handheld products • Identification • POS • Automotive

CCM03 MK2 Series

Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering Typical Applications • Handheld products • Identification • POS • Automotive

CCM03 MK2 Series

Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering Typical Applications • Handheld products • Identification • POS • Automotive

CCM03 MK2 Series

Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering Typical Applications • Handheld products • Identification • POS • Automotive

CCM03 MK II

Features Hinged Cover • Available with 6 or 8 contacts, with or without PCB locating pegs. • Available with insulated card presence switch. • The cover springs open when unlocked while the card is in place. • The molding is polarized so that the cover can only be closed if the card is correc

CCM03 MK2 Series

Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering Typical Applications • Handheld products • Identification • POS • Automotive

CCM03 MK II

Features Hinged Cover • Available with 6 or 8 contacts, with or without PCB locating pegs. • Available with insulated card presence switch. • The cover springs open when unlocked while the card is in place. • The molding is polarized so that the cover can only be closed if the card is correc

CCM03 MK2 Series

Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering Typical Applications • Handheld products • Identification • POS • Automotive

CCM03 MK II

Features Hinged Cover • Available with 6 or 8 contacts, with or without PCB locating pegs. • Available with insulated card presence switch. • The cover springs open when unlocked while the card is in place. • The molding is polarized so that the cover can only be closed if the card is correc

CCM03 MK2 Series

Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering Typical Applications • Handheld products • Identification • POS • Automotive

CCM03 MK2 Series

Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering Typical Applications • Handheld products • Identification • POS • Automotive

CCM03 MK2 Series

Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering Typical Applications • Handheld products • Identification • POS • Automotive

CCM03 MK II

Features Hinged Cover • Available with 6 or 8 contacts, with or without PCB locating pegs. • Available with insulated card presence switch. • The cover springs open when unlocked while the card is in place. • The molding is polarized so that the cover can only be closed if the card is correc

CCM03 MK II

Features Hinged Cover • Available with 6 or 8 contacts, with or without PCB locating pegs. • Available with insulated card presence switch. • The cover springs open when unlocked while the card is in place. • The molding is polarized so that the cover can only be closed if the card is correc

CCM03 MK II

Features Hinged Cover • Available with 6 or 8 contacts, with or without PCB locating pegs. • Available with insulated card presence switch. • The cover springs open when unlocked while the card is in place. • The molding is polarized so that the cover can only be closed if the card is correc

CCM03 MK II

Features Hinged Cover • Available with 6 or 8 contacts, with or without PCB locating pegs. • Available with insulated card presence switch. • The cover springs open when unlocked while the card is in place. • The molding is polarized so that the cover can only be closed if the card is correc

Demo Board User Manual

The 73S8023C Demo Board is a platform for evaluating the Teridian 73S8023C Smart Card Interface device. The board incorporates the 73S8023C integrated circuit and has been designed to operate either as a standalone platform (to be used in conjunction with an external microcontroller) or as a daugh

CCM03 MK2 Series

Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering Typical Applications • Handheld products • Identification • POS • Automotive

CCM03 MK3 Series

Features • SIM/SAM card acceptance • Hinged and fixed covers • Compatible with pick and place and lead free soldering

CCM01 Series

文件：169.7 Kbytes Page：3 Pages

Snap in boardlocks hold the connector in place prior to soldering.

文件：128.38 Kbytes Page：2 Pages

包装：托盘 描述：CONN SMART CARD PUSH-PULL R/A 连接器，互连器件 PC 卡插座

包装：托盘 描述：CONN SMART CARD PUSH-PULL R/A 连接器，互连器件 PC 卡插座

Operating life up to 100,000 cycles

文件：122 Kbytes Page：2 Pages

Available with 8 contacts which are designed to give a consistently reliable normal force over the life of the connector.

文件：170.52 Kbytes Page：2 Pages

Available with 8 contacts which are designed to give a consistently reliable normal force over the life of the connector.

文件：170.52 Kbytes Page：2 Pages