Features

Hinged Cover

• Available with 6 or 8 contacts, with or without PCB locating pegs.

• Available with insulated card presence switch.

• The cover springs open when unlocked while the card is in place.

• The molding is polarized so that the cover can only be closed if the card is correctly inserted.

• The cover can be replaced without removing the connector from the PCB.

• Inspection slots allow an electrical test to be made without opening the cover.

• The overall height of the connector is only 2,5 mm. The amount of space needed to mount the connector is just 29,65 mm x 17,2 mm.

Fixed Cover

• Available with 6 or 8 contacts.

• The overall height of the connector is 2,85 mm max. Only 25,5 mm x 17,2 mm of board space is required to mount the connector.

General

• With tape and reel packaging as standard, the connectors are designed to be automatically pick-and-placed.

• The high temperature thermoplastic moldings are suited for infrared and convection soldering processes.

• By using an inlay finish in the contact area the life of the precious metal is extended by over 10 times that of standard gold plating.

• Robustly formed printed circuit tails allow a co-planarity of ± 0,05 mm to be maintained.