isc Silicon NPN Power Transistor

DESCRIPTION ·DC Current Gain -: hFE = 40(Min.)@ IC= 25mA ·Collector-Emitter Breakdown Voltage-: V(BR)CEO= 60V(Min.) ·Complement to Type BD636 APPLICATIONS ·Designed for amplifier and switching applications.

Silicon NPN Power Transistor

文件：123.97 Kbytes Page：2 Pages

CLK-IN drive mode

General Description BD63510EFV series are stepping motor drivers of 1/16 micro step(sixteenth step) drive. As for its basic function, it is a low power consumption bipolar PWM constant current-drive driver with power supply rated voltage of 36V and rated output current (DC) of 1.0A. The input int

µ-step适用 36V耐压 步进电机驱动器系列

BD63511EFV是适用于1/16µ-step的步进电机驱动器。作为基本功能，是低功耗双极PWM恒流驱动器，额定电源为36V、额定输出电流(DC)为1.0A，接口为CLK-IN驱动型。通过内置DAC，励磁模式适用于Full step (2相励磁)、Half step (1-2相励磁)、Quarter step (2W1-2 相励磁)、Sixteenth step (4W1-2相励磁）模式，对于电流衰减方式，可自由设定FAST DECAY/SLOW DECAY的比率，可对所有电机实现很好的控制状态。另外，也可使用一个系统电源进行驱动，因此有助于提高整机设计的便利性。 • Single power supply input (rated voltage of 36V)\n• Rated output current:(DC) 1.0A\n• Low ON resistance DMOS output\n• CLK-IN drive mode\n• PWM constant current control (other oscillation)\n• Built-in spike noise cancel function (external noise filter is unnecessary)\n• Full step, Half step, Eight;

μ-step适用36V耐压 步进电机驱动器系列

BD63520AEFV是适用于1/16µ-step的步进电机驱动器。作为基本功能，是低功耗双极PWM恒流驱动器，额定电源为36V、额定输出电流(DC)为2.0A，接口为CLK-IN驱动型。通过内置DAC，励磁模式适用于Full step (2相励磁)、Half step (1-2相励磁)、Quarter step (W1-2 相励磁)、Sixteenth step (4W1-2相励磁）模式，对于电流衰减方式，可自由设定FAST DECAY/SLOW DECAY的比率，可对所有电机实现很好的控制状态。另外，也可使用一个系统电源进行驱动，因此有助于提高整机设计的便利性。 • Single power supply input (rated voltage of 36V)\n• Rated output current: (DC) 2.0A\n• Low ON resistance DMOS output\n• CLK-IN drive mode\n• PWM constant current control (other oscillation)\n• Built-in spike noise cancel function (external noise filter is unnecessary)\n• Full step, Half step, Quar;

Step-down,High-frequency

Large Current External FET Controller Type Switching Regulators ●Description The BD63536FJ is a gate direct drive switching regulator operational at a power supply voltage from 3V. This regulator uses a compact package SOP-J8 and operates as a switching regulator for the voltage control ty

封装/外壳：28-VSSOP（0.173"，4.40mm 宽）裸露焊盘 功能：驱动器 - 全集成，控制和功率级 包装：管件 描述：IC MTR DRV BIPOLR 8-28V 28HTSSOP 集成电路（IC） 电机驱动器，控制器

IC MTR DRV BIPOLR 8-28V 28HTSSOP

封装/外壳：28-VSSOP（0.173"，4.40mm 宽）裸露焊盘 功能：驱动器 - 全集成，控制和功率级 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：BD63511EFV IS STEPPING MOTOR DRI 集成电路（IC） 电机驱动器，控制器

Micro step 36V Stepping Motor Drivers

文件：1.83431 Mbytes Page：27 Pages

Micro step 36V Stepping Motor Drivers

文件：1.83431 Mbytes Page：27 Pages

Micro step 36V Stepping Motor Drivers

文件：1.80391 Mbytes Page：27 Pages

Micro step 36V Stepping Motor Drivers

文件：1.80391 Mbytes Page：27 Pages

Micro step 36V Stepping Motor Drivers

文件：1.82887 Mbytes Page：27 Pages

Low ON resistance DMOS output

文件：1.52554 Mbytes Page：26 Pages

Input 1ch Buck Controller

文件：1.48997 Mbytes Page：21 Pages

Input 1ch Buck Controller

文件：1.48997 Mbytes Page：21 Pages

Single H-Bridge Driver High-Speed Switching Type

文件：655.06 Kbytes Page：18 Pages

High Current Transistors

High Current Transistors NPN Silicon

NPN medium power transistors

DESCRIPTION NPN transistor in a TO-92; SOT54 plastic package. PNP complements: BC636, BC638 and BC640. FEATURES • High current (max. 1 A) • Low voltage (max. 80 V). APPLICATIONS • Driver stages of audio/video amplifiers.

Rectifier diodes Schottky barrier

GENERAL DESCRIPTION Dual, common cathode schottky rectifier diodes in a plastic envelope. Intended for use as output rectifiers in low voltage, high frequency switched mode power supplies. The PBYR645CT series is supplied in the conventional leaded SOT82 package. FEATURES • Low forward volt dr

DUAL WIDE BAND OPERATIONAL AMPLIFIER FOR ADSL LINE INTERFACE

DESCRIPTION This device is particularly intended for applications where multiple carriers must be amplified simultaneously with very low intermodulation products. It has been mainly designed to fit with ADSL chip-set such as ST70134 or ST70135. ■ LOW NOISE : 3.2nV/√Hz, 1.5pA/√Hz ■ HIGH OUTPUT C

DUAL WIDE BAND OPERATIONAL AMPLIFIER FOR ADSL LINE INTERFACE

DESCRIPTION This device is particularly intended for applications where multiple carriers must be amplified simultaneously with very low intermodulation products. It has been mainly designed to fit with ADSL chip-set such as ST70134 or ST70135. ■ LOW NOISE : 3.2nV/√Hz, 1.5pA/√Hz ■ HIGH OUTPUT C