Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

High accuracy detection, Ultra-low current consumption

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

Standard CMOS Standard CMOS

文件：507.55 Kbytes Page：18 Pages

封装/外壳：SC-74A，SOT-753 包装：管件 描述：IC SUPERVISOR 1 CHANNEL 5SSOP 集成电路（IC） 监控器

SWAGE/FORCE FIT STANDOFFS

[KEYSTONE] SWAGE/FORCE FIT STANDOFFS

Buffered, 4-Channel Simultaneous Sampling, 20-Bit 250kSPS DAS

FEATURES ► Complete 20-bit data acquisition system ► Simultaneous sampling of 4 internally buffered channels ► 250kSPS per channel throughput ► Differential, wide common-mode range inputs ► ±75pA typical input leakage at 25°C ► Full-scale input step settling time

Buffered, 4-Channel Simultaneous Sampling, 20-Bit 250kSPS DAS

FEATURES ► Complete 20-bit data acquisition system ► Simultaneous sampling of 4 internally buffered channels ► 250kSPS per channel throughput ► Differential, wide common-mode range inputs ► ±75pA typical input leakage at 25°C ► Full-scale input step settling time

5 V Slew-Rate Limited Half- and Full-Duplex RS-485/RS-422 Transceivers

GENERAL DESCRIPTION The ADM4850/ADM4851/ADM4852/ADM4853/ADM4854/ADM4855/ADM4856/ADM4857 are differential line transceivers suitable for high speed half- and full-duplex data communication on multipoint bus transmission lines. They are designed for balanced data transmission and comply with EIA St

SWAGE/FORCE FIT STANDOFFS

文件：336.76 Kbytes Page：1 Pages