isc Silicon PNP Power Transistor

DESCRIPTION • Excellent Safe Operating Area • DC Current Gain-hFE= 25(Min.)@IC = -4A • Collector-Emitter Saturation Voltage- : VCE(sat)= -1.0 V(Max)@ IC = -5A • Complement to Type BD313 APPLICATIONS • Designed for high quality amplifiers operating up to 60 watts into 4 ohm load.

Silicon PNP Power Transistor

DESCRIPTION • Excellent Safe Operating Area • DC Current Gain-hFE= 25(Min.)@IC = -4A • Collector-Emitter Saturation Voltage- : VCE(sat)= -1.0 V(Max)@ IC = -5A • Complement to Type BD313 APPLICATIONS • Designed for high quality amplifiers operating up to 60 watts into 4 ohm load.

Low-voltage stabistor

DESCRIPTION Low-voltage stabilization diode in a hermetically-sealed SOD27 (DO-35) glass package. FEATURES • Low-voltage stabilization • Forward voltage range: 610 mV to 940 mV • Total power dissipation: max. 400 mW. APPLICATIONS • Low-voltage stabilization e.g. – Bias

丝印代码：H04；Digital transistors (built-in resistor)

600mA/ 15V Digital transistors(with built-in resistors) Features In addition to the features ofregular digital transistors, 1) Low saturation voltage, typically VCE(sat)=40mVat IC/IB=50mA/2.5mA, makes these transistors ideal for muting circuits. 2) Thesetransistors can be usedat hig

Digital transistors (built-in resistor)

600mA/ 15V Digital transistors(with built-in resistors) Features In addition to the features ofregular digital transistors, 1) Low saturation voltage, typically VCE(sat)=40mVat IC/IB=50mA/2.5mA, makes these transistors ideal for muting circuits. 2) Thesetransistors can be usedat hig

丝印代码：H04；Digital transistors (built-in resistor)

600mA/ 15V Digital transistors(with built-in resistors) Features In addition to the features ofregular digital transistors, 1) Low saturation voltage, typically VCE(sat)=40mVat IC/IB=50mA/2.5mA, makes these transistors ideal for muting circuits. 2) Thesetransistors can be usedat hig

RF POWER TRANSISTORS NPN SILICON

The RF Line NPN Silicon RF Power Transistors . . . designed primarily for wideband large–signal driver and output amplifier stages in the 30–200 MHz frequency range. • Guaranteed Performance at 150 MHz, 28 Vdc Output Power = 30 Watts Minimum Gain = 10 dB • 100 Tested for Load Mismatch