SAW Components Low-Loss Dual Band Filter for Mobile Communication 881,5 & 1960,0 MHz

Features ■ Low-loss 2-in-1 RF filter for mobile telephone AMPS and PCS bands, receive path ■ Usable passband: Filter 1 (AMPS): 25 MHz Filter 2 (PCS): 60 MHz ■ Unbalanced to balanced operation for both filters ■ Impedance transformation from 50 Ω to 200 Ω for AMPS filter ■ Suitable for GPRS cl

16-Bit 1 MSPS SAR Unipolar ADC with Ref

GENERAL DESCRIPTION The AD7667is a 16-bit, 1 MSPS, charge redistribution SAR analog-to-digital converter that operates from a single 5 V power supply. The part contains a high speed 16-bit sampling ADC, an internal conversion clock, internal reference, error correction circuits, and both serial

16-Bit, 250 kSPS, Unipolar/Bipolar Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7610 is a 16-bit charge redistribution successive approximation register (SAR), architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write only seria

16-Bit, 750 kSPS, Unipolar/Bipolar Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7612 is a 16-bit charge redistribution successive approximation register (SAR), architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write only seria

18-Bit, 2.5 LSB INL, 800 kSPS SAR ADC

GENERAL DESCRIPTION The AD7665 is a 16-bit, 570 kSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5 V power supply. It contains a high speed 16-bit sampling ADC, a resistor input scaler that allows various input ranges, an internal conversion clock, error

14-Bit, 1 MSPS, Differential, Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7952 is a 14-bit, charge redistribution, successive approximation register (SAR) architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write-only serial