8-bit Atmel Microcontroller with 16/32/64KB In-System Programmable Flash

Features • High Performance, Low Power Atmel® AVR® 8-Bit Microcontroller • Advanced RISC Architecture – 135 Powerful Instructions – Most Single Clock Cycle Execution – 32 × 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16MHz – On-Chip 2-cycle Mul

8-bit Atmel Microcontroller with 16/32/64KB In-System Programmable Flash

Features • High Performance, Low Power Atmel® AVR® 8-Bit Microcontroller • Advanced RISC Architecture – 135 Powerful Instructions – Most Single Clock Cycle Execution – 32 × 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16MHz – On-Chip 2-cycle Mul

8-bit Atmel Microcontroller with 64K/128K/256K Bytes In-System Programmable Flash

Overview The ATmega640/1280/1281/2560/2561 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single cloc k cycle, the ATmega640/1280/1281/2560/2561 achieves throughputs approaching 1 MIPS per MHz allowing the system desi

8-bit Atmel Microcontroller with 16/32/64KB In-System Programmable Flash

Features • High Performance, Low Power Atmel® AVR® 8-Bit Microcontroller • Advanced RISC Architecture – 135 Powerful Instructions – Most Single Clock Cycle Execution – 32 × 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16MHz – On-Chip 2-cycle Mul

8-bit Atmel Microcontroller with 16/32/64KB In-System Programmable Flash

Features • High Performance, Low Power Atmel® AVR® 8-Bit Microcontroller • Advanced RISC Architecture – 135 Powerful Instructions – Most Single Clock Cycle Execution – 32 × 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16MHz – On-Chip 2-cycle Mul

8-bit Microcontroller with 64K/128K/256K Bytes In-System Programmable Flash

文件：974.64 Kbytes Page：37 Pages

8-bit Microcontroller with 64K/128K/256K Bytes In-System Programmable Flash

文件：974.64 Kbytes Page：37 Pages

Hot-Swap Controller and Digital Power and Energy Monitor with PMBus Interface

GENERAL DESCRIPTION The ADM1281 is a hot-swap controller that allows a circuit board to be removed from or inserted into a live backplane. It also features current, voltage, power, and temperature readback through an integrated 12-bit analog-to-digital converter (ADC), accessed using a PMBus™

Hot-Swap Controller and Digital Power and Energy Monitor with PMBus Interface

GENERAL DESCRIPTION The ADM1281 is a hot-swap controller that allows a circuit board to be removed from or inserted into a live backplane. It also features current, voltage, power, and temperature readback through an integrated 12-bit analog-to-digital converter (ADC), accessed using a PMBus™

Hot-Swap Controller and Digital Power and Energy Monitor with PMBus Interface

FEATURES ► Drop-in replacement to ADM1278 ► ±0.3% accurate, 12-bit ADC for IOUT, VIN, VOUT, and temperature ► 290 ns response time to short-circuit ► Shutdown on detection of FET health fault ► Constant power foldback for tighter FET SOA protection ► Remote temperature sensing with progr

Hot-Swap Controller and Digital Power and Energy Monitor with PMBus Interface

FEATURES ► Drop-in replacement to ADM1278 ► ±0.3% accurate, 12-bit ADC for IOUT, VIN, VOUT, and temperature ► 290 ns response time to short-circuit ► Shutdown on detection of FET health fault ► Constant power foldback for tighter FET SOA protection ► Remote temperature sensing with progr

Hot-Swap Controller and Digital Power and Energy Monitor with PMBus Interface

GENERAL DESCRIPTION The ADM1281 is a hot-swap controller that allows a circuit board to be removed from or inserted into a live backplane. It also features current, voltage, power, and temperature readback through an integrated 12-bit analog-to-digital converter (ADC), accessed using a PMBus™