10G USB 3.1 Re-timer (1-Port)

Features
Built-in re-timer - Integrated re-timer for USB 3.1 1-port (Tx/Rx) up to 10Gbps - Loss compensation to recover up to 23dB channel loss
Protocol awareness for better link power management (LPM) and savings
Reference clock for re-timer - Utilizes a 24MHz reference XTAL or 1.05V

10G Active Mux (1x2) with Integrated Re-timer for USB 3.1

Features
Built-in re-timer - Integrated re-timer for USB 3.1 up to Gen 2 @ 10Gbps - Loss compensation to recover up to 23dB channel loss
Integrated mux - Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector - Mux control input through I2C comma

8.1G DisplayPort™ 4-lanes Re-timer

Features  Built-in re-timers - Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps - Supports both transparent mode and nontransparent mode (transparent or LTTPR) - Loss compensation to recover up to 27dB channel loss  Integrated AUX pass-through

SlimPort® (4K Ultra-HD) Receiver

Features * Standard compliance - DisplayPort1.4, HDCP2.2/1.4 - MIPI-DSI 1.2 and D-PHY 1.1 * DisplayPort Receiver - DisplayPort1﹒4 receiver - Configurable 1, 2 or 4-lane input supports: HBR3 (8.1Gbps), 1882 (5.4Gbps), HBR (2.7Gbps) and RBR (1.62Gbps) - Horizontal left / right line splitting

10G USB 3.1 Re-timer (1-Port)

Decade and Binary Counters

General Description The DM7490A monolithic counter contains four master-slave flip-flops and additional gating to provide a divide-by-two counter and a three-stage binary counter for which the count cycle length is divide-by-five. The counter has a gated zero reset and also has gated setto-nine

The ’90 is a 4-stage ripple counter containing a high speed flip-flop acting as a divide-by-two and three flip-flops connected as a divideby- five counter.

DESCRIPTION — The ’90 is a 4-stage ripple counter containing a high speed flip-flop acting as a divide-by-two and three flip-flops connected as a divideby- five counter. It can be connected to operate with a conventional BCD output pattern or it can be connected to provide a 50% duty cycle

Decade and Binary Counters

文件：133.7 Kbytes Page：10 Pages

Package Contains a Divide-by-Two and a Divide-by-Five Counter

文件：410.83 Kbytes Page：1 Pages

Package Contains a Divide-by-Two and a Divide-by-Five Counter

文件：410.83 Kbytes Page：1 Pages