10G Active Mux (1x2) with Integrated Re-timer for USB 3.2

Features * Built-in re-timer ㅡ Integrated re-timer for USB 3.2 up to Gen2 @ 10Gbps — Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification (Appendix-E) — Supports both host (source) and device (sink) applications in US

Bidirectional Active USB-C™ Cable for USB3.2 (10G) and DP1.3 (8.1G)

Features  Bidirectional active USB-C cable carrying 4L DP or 2L DP and USB3.2 - Supports up to 4L of DisplayPort in/out, with signal conditioning up to 8.1Gbps (supports HBR3, HBR2, HBR, RBR rates) - Supports USB3.1 in/out, with signal conditioning up to 10Gbps - Supports USB2.0 (480Mbps) -

8.1G (up to HBR3) DisplayPort™ 4-lane Re-timer

Features  Built-in re-timers − Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps. Supports both transparent mode and non-transparent mode (transparent or LTTPR) − Loss compensation to recover up to 27dB  Integrated AUX pass-through − Integrated A

6G Active Re-driver with Linear Equalization for HDMI 2.0

Features • Built-in Re-driver with CTLE − Integrated Re-driver for HDMI2.0 up to 6Gbps − Supports DP++, HDMI Source applications − Loss compensation to recover up to -10dB channel loss @6Gbps • CTLE, Flat Gain and Swing configurations − Four-lane configurations set by pin strapping. − Indep

10G Active Redriver with Linear Equalization for USB3.2/DisplayPort™

Features • Built-in redrivers − Integrated re-driver for USB3.2 up to Gen 2 @ 10Gbps − Integrated re-drivers for DisplayPort up to UHBR10 @ 10Gbps. − Supports both host (source) and device (sink) applications in USB-C subsystems with DisplayPort Alternate Mode − Loss compensation to recover u

10G USB 3.2 Re-timer (1-Port)

Features * Built-in re-timer ㅡ Integrated re-timer for USB 3.2 1-port (Tx/Rx) up to 10Gbps ㅡ Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re- * timer (BLR) Architectures of USB3.1 Specification (Appendix-E) ㅡ 1055 compensation to recover up to 23dB channel loss

12G Active Redriver with Linear Equalization for HDMI 2.1

Features  Built-in CTLE redrivers - Independent channel configuration - Loss compensation to recover up to -12dB channel loss @ 12Gbps  Four lanes of HDMI 2.1 up to 12Gbps - Supports DP++  Serial and debug interfaces - I2C Slave interface, up to 1MHz, for redriver configuration  Indust

10G Active Mux (4x4) with Integrated Re-timers for USB3.2/DisplayPort™

Features  Built-in re-timers − Integrated re-timers for USB3.2 up to Gen 2 @ 10Gbps − US3.2 Specification (Appendix-E) compliant re-timer − Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB3.2 Specification (Appendix-E) − Integrat

106 Active Mux (6x4) with Integrated Re-timers for USB3.2/DisplayPort1.4

Features * Built-in re-timers — Integrated re-timers for USB3.2 up to Gen 2 @ 10Gbps — Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB3.2 Specification (Appendix-E) — Integrated re-timers (Link training-tunable PHY repeater) for D

20G Active Mux (2x2) with Integrated Re-timer and CC Detection for USB 3.2

Features  Built-in re-timer − Integrated re-timer for USB 3.2 up to Gen 2 @ 2x10Gbps for a combined 20G data throughput − Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification (Appendix-E) − Supports both host (source

10G Active Mux (1x2) with Integrated Re-timer and CC Detection for USB 3.2

Features  Built-in re-timer − Integrated re-timer for USB 3.2 up to Gen2 @ 10Gbps − Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification (Appendix-E) − Loss compensation to recover up to 23dB channel loss  Integrat

10G Active Mux (1x2) with Integrated Re-timer for USB 3.2

DIGITALLY CONTROLLED AUDIO PROCESSOR WITH SURROUND SOUND MATRIX AND VOICE CANCELLER

DESCRIPTION The TDA7430/TDA7431 is volume tone (bass middle and treble) balance (Left/Right) processors voice canceller for quality audio applications in car radio and Hi-Fi systems. They reproduce surround sound by using programmable phase shifters and a signal matrix. Control of all the funct

DC-DC CONVERTER BUCK (STEP-DOWN) 42V 3A CC/CV

DESCRIPTION A7431 is a wide input voltage, high efficiency CC/CV step-down DC-DC converter that operates in either CV (Constant Output Voltage) mode or CC (Constant Output Current) mode. A7431 provides up to 3A output current at 125kHz switching frequency. A7431 eliminates the expensive, high a

DC-DC CONVERTER BUCK (STEP-DOWN) 42V 3A CC/CV

DESCRIPTION A7431A is a wide input voltage, high efficiency CC/CV step-down DC/DC converter that operates in either CV (Constant Output Voltage) mode or CC (Constant Output Current) mode. A7431A provides up to 3A output current at 230kHz switching frequency. A7431A eliminates the expensive, high

UDLT-3 Input/Output Transformer

文件：107.51 Kbytes Page：1 Pages

P-Channel 30-V (D-S) MOSFET

文件：193.97 Kbytes Page：3 Pages