155/622 Mb/s Clock and Data Recovery IC with Integrated Limiting Amplifier

FEATURES Meets SONET requirements for jitter transfer/ generation/tolerance Quantizer sensitivity: 4 mV typical Adjustable slice level: ±100 mV Patented clock recovery architecture Loss-of-signal detect range: 3 mV to 15 mV Single-reference clock frequency for all rates, including 15/14 (7&#

封装/外壳：48-WFQFN 裸露焊盘，CSP 包装：散装 描述：IC CLOCK/DATA RECOVERY 48LFCSP 集成电路（IC） 应用特定时钟/定时

155/622 Mb/s Clock and Data Recovery IC with Integrated Limiting Amplifier

FEATURES Meets SONET requirements for jitter transfer/ generation/tolerance Quantizer sensitivity: 4 mV typical Adjustable slice level: ±100 mV Patented clock recovery architecture Loss-of-signal detect range: 3 mV to 15 mV Single-reference clock frequency for all rates, including 15/14 (7&#

封装/外壳：48-WFQFN 裸露焊盘，CSP 包装：托盘 描述：IC CLOCK/DATA RECOVERY 48LFCSP 集成电路（IC） 应用特定时钟/定时

Earth Leakage Detector

Description The KA2807 is a IC for ground fault circuit interrupters which are intended to provide an electrical shock hazard protection from line to ground fault currents on grounded circuits of 120V supplies. Features • Full Advantage of the UL943 • Built-In Voltage Regulator • Sense Coil:

PREAMPLIFIER FOR INFRARED REMOTE CONTROLLER

DESCRIPTION The µ PC2807 and 2807A are semiconductors integrated circuit developed as preamplifiers for the receiver module of infrared remote controllers. These preamplifiers can be directly connected to a PIN photodiode, and integrate a high-gain first stage amplifier, limiter, bandpass filter,

PREAMPLIFIER FOR INFRARED REMOTE CONTROLLER

DESCRIPTION The µ PC2807 and 2807A are semiconductors integrated circuit developed as preamplifiers for the receiver module of infrared remote controllers. These preamplifiers can be directly connected to a PIN photodiode, and integrate a high-gain first stage amplifier, limiter, bandpass filter,

PREAMPLIFIER FOR INFRARED REMOTE CONTROLLER

DESCRIPTION The µ PC2807 and 2807A are semiconductors integrated circuit developed as preamplifiers for the receiver module of infrared remote controllers. These preamplifiers can be directly connected to a PIN photodiode, and integrate a high-gain first stage amplifier, limiter, bandpass filter,

PREAMPLIFIER FOR INFRARED REMOTE CONTROLLER

DESCRIPTION The µ PC2807 and 2807A are semiconductors integrated circuit developed as preamplifiers for the receiver module of infrared remote controllers. These preamplifiers can be directly connected to a PIN photodiode, and integrate a high-gain first stage amplifier, limiter, bandpass filter,