20 MHz to 1.0 GHz IF Gain Block

GENERAL DESCRIPTION The ADL5535 is a 16 dB linear amplifier that operates at frequencies up to 1 GHz. The device can be used in a wide variety of cellular, CATV, military, and instrumentation equipment. The ADL5535 provides the highest dynamic range available from an internally matched IF gain b

20 MHz to 1.0 GHz IF Gain Block

FEATURES Fixed gain of 16 dB Operation from 20 MHz to 1.0 GHz Input and output internally matched to 50 Ω Integrated bias control circuit OIP3 45.5 dBm at 190 MHz 45.5 dBm at 380 MHz Noise figure 3.2 dB at 190 MHz 3.3 dB at 380 MHz P1dB of 18.9 dBm at 190 MHz Single 5 V power supply L

20 MHz 至1.0 GHz 中频增益模块

Low Noise, Low Distortion Single-Ended Input Drive Circuit for Differential Input IF Sampling ADCs

文件：165.82 Kbytes Page：3 Pages

20 MHz to 1.0 GHz IF Gain Block

FEATURES Fixed gain of 16 dB Operation from 20 MHz to 1.0 GHz Input and output internally matched to 50 Ω Integrated bias control circuit OIP3 45.5 dBm at 190 MHz 45.5 dBm at 380 MHz Noise figure 3.2 dB at 190 MHz 3.3 dB at 380 MHz P1dB of 18.9 dBm at 190 MHz Single 5 V power supply L

20 MHz to 1.0 GHz IF Gain Block

FEATURES Fixed gain of 16 dB Operation from 20 MHz to 1.0 GHz Input and output internally matched to 50 Ω Integrated bias control circuit OIP3 45.5 dBm at 190 MHz 45.5 dBm at 380 MHz Noise figure 3.2 dB at 190 MHz 3.3 dB at 380 MHz P1dB of 18.9 dBm at 190 MHz Single 5 V power supply L

20 MHz to 1.0 GHz IF Gain Block

GENERAL DESCRIPTION The ADL5535 is a 16 dB linear amplifier that operates at frequencies up to 1 GHz. The device can be used in a wide variety of cellular, CATV, military, and instrumentation equipment. The ADL5535 provides the highest dynamic range available from an internally matched IF gain b

20 MHz to 1.0 GHz IF Gain Block

FEATURES Fixed gain of 16 dB Operation from 20 MHz to 1.0 GHz Input and output internally matched to 50 Ω Integrated bias control circuit OIP3 45.5 dBm at 190 MHz 45.5 dBm at 380 MHz Noise figure 3.2 dB at 190 MHz 3.3 dB at 380 MHz P1dB of 18.9 dBm at 190 MHz Single 5 V power supply L

20 MHz to 1.0 GHz IF Gain Block

GENERAL DESCRIPTION The ADL5535 is a 16 dB linear amplifier that operates at frequencies up to 1 GHz. The device can be used in a wide variety of cellular, CATV, military, and instrumentation equipment. The ADL5535 provides the highest dynamic range available from an internally matched IF gain b

封装/外壳：TO-243AA 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC RF AMP GP 20MHZ-1GHZ SOT89-3 RF/IF，射频/中频和 RFID 射频放大器

包装：散装 描述：EVAL BOARD FOR ADL5535 开发板，套件，编程器 射频评估和开发套件，开发板

32-Channel, 14-Bit DAC with Full-Scale Output Voltage Programmable from 50 V to 200 V

GENERAL DESCRIPTION The AD5535 is a 32-channel, 14-bit DAC with an on-chip high voltage output amplifier. This device is targeted for optical micro-electromechanical systems. The output voltage range is programmable via the REF_IN pin. The output range is 0 V to 50 V when REF_IN = 1 V, and 0 V to

32-Channel, 14-Bit DAC with Full-Scale Output Voltage Programmable from 50 V to 200 V

GENERAL DESCRIPTION The AD5535 is a 32-channel, 14-bit DAC with an on-chip high voltage output amplifier. This device is targeted for optical micro-electromechanical systems. The output voltage range is programmable via the REF_IN pin. The output range is 0 V to 50 V when REF_IN = 1 V, and 0 V to

32-Channel, 14-Bit DAC with Full-Scale Output Voltage Programmable from 50 V to 200 V

GENERAL DESCRIPTION The AD5535B is a 32-channel, 14-bit denseDAC® with an on-chip high voltage output amplifier. This device is targeted for optical micro-electromechanical systems. The output voltage range is programmable via the REF_IN pin. The output range is 0 V to 50 V when REF_IN = 1 V, and

32-Channel, 14-Bit DAC with Full-Scale Output Voltage Programmable from 50 V to 200 V

GENERAL DESCRIPTION The AD5535B is a 32-channel, 14-bit denseDAC® with an on-chip high voltage output amplifier. This device is targeted for optical micro-electromechanical systems. The output voltage range is programmable via the REF_IN pin. The output range is 0 V to 50 V when REF_IN = 1 V, and

16 (19/.0117) AWG Tinned Copper

文件：410.11 Kbytes Page：4 Pages