100 MHz to 6 GHz TruPwr Detector

GENERAL DESCRIPTION The ADL5500 is a mean-responding power detector for use in high frequency receiver and transmitter signal chains from 100 MHz to 6 GHz. It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor. The input is internally

100 MHz to 6 GHz TruPwr Detector

FEATURES True rms response Excellent temperature stability ±0.1 dB accuracy vs. temperature over top 8 dB of input range Up to 30 dB input dynamic range at 3.9 GHz 50 Ω input impedance 1250 mV rms, +15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3 mW at 3 V supply

100 MHz to 6 GHz TruPwr Detector

FEATURES True rms response Excellent temperature stability ±0.1 dB accuracy vs. temperature over top 8 dB of input range Up to 30 dB input dynamic range at 3.9 GHz 50 Ω input impedance 1250 mV rms, +15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3 mW at 3 V supply

100 MHz to 6 GHz TruPwr Detector

GENERAL DESCRIPTION The ADL5500 is a mean-responding power detector for use in high frequency receiver and transmitter signal chains from 100 MHz to 6 GHz. It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor. The input is internally

100 MHz to 6 GHz TruPwr Detector

GENERAL DESCRIPTION The ADL5500 is a mean-responding power detector for use in high frequency receiver and transmitter signal chains from 100 MHz to 6 GHz. It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor. The input is internally

100 MHz to 6 GHz TruPwr Detector

FEATURES True rms response Excellent temperature stability ±0.1 dB accuracy vs. temperature over top 8 dB of input range Up to 30 dB input dynamic range at 3.9 GHz 50 Ω input impedance 1250 mV rms, +15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3 mW at 3 V supply

100 MHz to 6 GHz TruPwr Detector

GENERAL DESCRIPTION The ADL5500 is a mean-responding power detector for use in high frequency receiver and transmitter signal chains from 100 MHz to 6 GHz. It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor. The input is internally

100 MHz to 6 GHz TruPwr Detector

FEATURES True rms response Excellent temperature stability ±0.1 dB accuracy vs. temperature over top 8 dB of input range Up to 30 dB input dynamic range at 3.9 GHz 50 Ω input impedance 1250 mV rms, +15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3 mW at 3 V supply

50 MHz to 4 GHz TruPwr Detector

GENERAL DESCRIPTION The ADL5501 is a mean-responding TruPwr™ power detector for use in high frequency receiver and transmitter signal chains from 50 MHz to 6 GHz. It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor. The input is inte

50 MHz to 6 GHz TruPwr Detector

FEATURES True rms response Excellent temperature stability Up to 30 dB input dynamic range 50 Ω input impedance 1.25 V rms, 15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3.3 mW at 3 V supply RoHS-compliant APPLICATIONS Measurement of CDMA-, CDMA2000-, W-CDMA-,

50 Hz to 3.8 GHz 65 dB TruPwr™ Detector

FEATURES Complete, fully calibrated measurement/control system Accurate rms-to-dc conversion from 50 Hz to 3.8 GHz Input dynamic range of >65 dB: −52 dBm to +8 dBm in 50 Ω Waveform and modulation independent, such as GSM/CDMA/TDMA Linear-in-decibels output, scaled 50 mV/dB Law conformance error

50 MHz to 6 GHz TruPwr Detector

FEATURES True rms response Excellent temperature stability Up to 30 dB input dynamic range 50 Ω input impedance 1.25 V rms, 15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3.3 mW at 3 V supply RoHS-compliant APPLICATIONS Measurement of CDMA-, CDMA2000-, W-CDMA-,

50 MHz to 4 GHz TruPwr Detector

GENERAL DESCRIPTION The ADL5501 is a mean-responding TruPwr™ power detector for use in high frequency receiver and transmitter signal chains from 50 MHz to 6 GHz. It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor. The input is inte

50 MHz to 6 GHz TruPwr Detector

FEATURES True rms response Excellent temperature stability Up to 30 dB input dynamic range 50 Ω input impedance 1.25 V rms, 15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3.3 mW at 3 V supply RoHS-compliant APPLICATIONS Measurement of CDMA-, CDMA2000-, W-CDMA-,

50 MHz to 4 GHz TruPwr Detector

GENERAL DESCRIPTION The ADL5501 is a mean-responding TruPwr™ power detector for use in high frequency receiver and transmitter signal chains from 50 MHz to 6 GHz. It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor. The input is inte

50 MHz to 6 GHz TruPwr Detector

FEATURES True rms response Excellent temperature stability Up to 30 dB input dynamic range 50 Ω input impedance 1.25 V rms, 15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3.3 mW at 3 V supply RoHS-compliant APPLICATIONS Measurement of CDMA-, CDMA2000-, W-CDMA-,

50 MHz to 4 GHz TruPwr Detector

GENERAL DESCRIPTION The ADL5501 is a mean-responding TruPwr™ power detector for use in high frequency receiver and transmitter signal chains from 50 MHz to 6 GHz. It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor. The input is inte

50 MHz to 6 GHz TruPwr Detector

FEATURES True rms response Excellent temperature stability Up to 30 dB input dynamic range 50 Ω input impedance 1.25 V rms, 15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3.3 mW at 3 V supply RoHS-compliant APPLICATIONS Measurement of CDMA-, CDMA2000-, W-CDMA-,

800 MHz to 3800 MHz Crest Factor Detector

GENERAL DESCRIPTION The ADL5502 is a mean-responding (true rms) power detector in combination with an envelope detector to accurately determine the crest factor of a modulated signal. It can be used in high frequency receiver and transmitter signal chains from 450 MHz to 6 GHz with envelope bandw

800 MHz to 3800 MHz Crest Factor Detector

GENERAL DESCRIPTION The ADL5502 is a mean-responding (true rms) power detector in combination with an envelope detector to accurately determine the crest factor of a modulated signal. It can be used in high frequency receiver and transmitter signal chains from 450 MHz to 6 GHz with envelope bandw

800 MHz to 3800 MHz Crest Factor Detector

GENERAL DESCRIPTION The ADL5502 is a mean-responding (true rms) power detector in combination with an envelope detector to accurately determine the crest factor of a modulated signal. It can be used in high frequency receiver and transmitter signal chains from 450 MHz to 6 GHz with envelope bandw

800 MHz to 3800 MHz Crest Factor Detector

GENERAL DESCRIPTION The ADL5502 is a mean-responding (true rms) power detector in combination with an envelope detector to accurately determine the crest factor of a modulated signal. It can be used in high frequency receiver and transmitter signal chains from 450 MHz to 6 GHz with envelope bandw

450 MHz to 6000 MHz TruPwr Detector

GENERAL DESCRIPTION The ADL5504 is a TruPwr™ mean-responding (true rms) power detector for use in high frequency receiver and transmitter signal chains from 450 MHz to 6000 MHz. Requiring only a single supply between 2.5 V and 3.3 V, the detector draws less than 1.8 mA. The input is internally ac

450 MHz to 6000 MHz TruPwr Detector

FEATURES True rms response detector Excellent temperature stability ±0.25 dB rms detection accuracy vs. temperature Over 35 dB input power dynamic range, inclusive of crest factor RF bandwidths from 450 MHz to 6000 MHz 500 Ω input impedance Single-supply operation: 2.5 V to 3.3 V Low power

450 MHz to 6000 MHz TruPwr Detector

GENERAL DESCRIPTION The ADL5504 is a TruPwr™ mean-responding (true rms) power detector for use in high frequency receiver and transmitter signal chains from 450 MHz to 6000 MHz. Requiring only a single supply between 2.5 V and 3.3 V, the detector draws less than 1.8 mA. The input is internally ac

450 MHz to 6000 MHz TruPwr Detector

FEATURES True rms response detector Excellent temperature stability ±0.25 dB rms detection accuracy vs. temperature Over 35 dB input power dynamic range, inclusive of crest factor RF bandwidths from 450 MHz to 6000 MHz 500 Ω input impedance Single-supply operation: 2.5 V to 3.3 V Low power

450 MHz to 6000 MHz TruPwr Detector

GENERAL DESCRIPTION The ADL5504 is a TruPwr™ mean-responding (true rms) power detector for use in high frequency receiver and transmitter signal chains from 450 MHz to 6000 MHz. Requiring only a single supply between 2.5 V and 3.3 V, the detector draws less than 1.8 mA. The input is internally ac

450 MHz to 6000 MHz TruPwr Detector

FEATURES True rms response detector Excellent temperature stability ±0.25 dB rms detection accuracy vs. temperature Over 35 dB input power dynamic range, inclusive of crest factor RF bandwidths from 450 MHz to 6000 MHz 500 Ω input impedance Single-supply operation: 2.5 V to 3.3 V Low power

450 MHz to 6000 MHz TruPwr Detector

GENERAL DESCRIPTION The ADL5504 is a TruPwr™ mean-responding (true rms) power detector for use in high frequency receiver and transmitter signal chains from 450 MHz to 6000 MHz. Requiring only a single supply between 2.5 V and 3.3 V, the detector draws less than 1.8 mA. The input is internally ac

450 MHz to 6000 MHz TruPwr Detector

FEATURES True rms response detector Excellent temperature stability ±0.25 dB rms detection accuracy vs. temperature Over 35 dB input power dynamic range, inclusive of crest factor RF bandwidths from 450 MHz to 6000 MHz 500 Ω input impedance Single-supply operation: 2.5 V to 3.3 V Low power

450 MHz to 6000Mhz TruPwr Detector

GENERAL DESCRIPTION The ADL5505 is a TruPwr™ mean-responding (true rms) power detector for use in high frequency receiver and transmitter signal chains from 450 MHz to 6000 MHz. Requiring only a single supply between 2.5 V and 3.3 V, the detector draws less than 1.8 mA. The input is internally ac

450 MHz to 6000 MHz TruPwr Detector

FEATURES True rms response detector Excellent temperature stability ±0.25 dB rms detection accuracy vs. temperature Over 35 dB input power dynamic range, inclusive of crest factor RF bandwidths from 450 MHz to 6000 MHz 500 Ω input impedance Single-supply operation: 2.5 V to 3.3 V Low power

450 MHz to 6000 MHz TruPwr Detector

FEATURES True rms response detector Excellent temperature stability ±0.25 dB rms detection accuracy vs. temperature Over 35 dB input power dynamic range, inclusive of crest factor RF bandwidths from 450 MHz to 6000 MHz 500 Ω input impedance Single-supply operation: 2.5 V to 3.3 V Low power

450 MHz to 6000Mhz TruPwr Detector

GENERAL DESCRIPTION The ADL5505 is a TruPwr™ mean-responding (true rms) power detector for use in high frequency receiver and transmitter signal chains from 450 MHz to 6000 MHz. Requiring only a single supply between 2.5 V and 3.3 V, the detector draws less than 1.8 mA. The input is internally ac

450 MHz to 6000 MHz TruPwr Detector

FEATURES True rms response detector Excellent temperature stability ±0.25 dB rms detection accuracy vs. temperature Over 35 dB input power dynamic range, inclusive of crest factor RF bandwidths from 450 MHz to 6000 MHz 500 Ω input impedance Single-supply operation: 2.5 V to 3.3 V Low power

450 MHz to 6000Mhz TruPwr Detector

GENERAL DESCRIPTION The ADL5505 is a TruPwr™ mean-responding (true rms) power detector for use in high frequency receiver and transmitter signal chains from 450 MHz to 6000 MHz. Requiring only a single supply between 2.5 V and 3.3 V, the detector draws less than 1.8 mA. The input is internally ac

450 MHz to 6000 MHz TruPwr Detector

FEATURES True rms response detector Excellent temperature stability ±0.25 dB rms detection accuracy vs. temperature Over 35 dB input power dynamic range, inclusive of crest factor RF bandwidths from 450 MHz to 6000 MHz 500 Ω input impedance Single-supply operation: 2.5 V to 3.3 V Low power

450 MHz to 6000Mhz TruPwr Detector

GENERAL DESCRIPTION The ADL5505 is a TruPwr™ mean-responding (true rms) power detector for use in high frequency receiver and transmitter signal chains from 450 MHz to 6000 MHz. Requiring only a single supply between 2.5 V and 3.3 V, the detector draws less than 1.8 mA. The input is internally ac

450 MHz to 6000 MHz TruPwr Detector

FEATURES True rms response detector Excellent temperature stability ±0.25 dB rms detection accuracy vs. temperature Over 35 dB input power dynamic range, inclusive of crest factor RF bandwidths from 450 MHz to 6000 MHz 500 Ω input impedance Single-supply operation: 2.5 V to 3.3 V Low power

30 MHz to 4.5 GHz, 45 dB RF Detector

FEATURES ► Complete RF detector function ► Typical dynamic range: 45 dB (±1.0 dB) ► Frequency range from 30 MHz to 4.5 GHz ► Excellent temperature stability ► Stable linear in decibel response ► Power on/off response time: 65 ns/145 ns (rise/fall) ► −5 dBm input power applied ► Operates fr

30 MHz to 4.5 GHz, 45 dB RF Detector

FEATURES ► Complete RF detector function ► Typical dynamic range: 45 dB (±1.0 dB) ► Frequency range from 30 MHz to 4.5 GHz ► Excellent temperature stability ► Stable linear in decibel response ► Power on/off response time: 65 ns/145 ns (rise/fall) ► −5 dBm input power applied ► Operates fr

30 MHz to 4.5 GHz, 45 dB RF Detector

FEATURES ► Complete RF detector function ► Typical dynamic range: 45 dB (±1.0 dB) ► Frequency range from 30 MHz to 4.5 GHz ► Excellent temperature stability ► Stable linear in decibel response ► Power on/off response time: 65 ns/145 ns (rise/fall) ► −5 dBm input power applied ► Operates fr

30 MHz to 4.5 GHz, 45 dB RF Detector

FEATURES ► Complete RF detector function ► Typical dynamic range: 45 dB (±1.0 dB) ► Frequency range from 30 MHz to 4.5 GHz ► Excellent temperature stability ► Stable linear in decibel response ► Power on/off response time: 65 ns/145 ns (rise/fall) ► −5 dBm input power applied ► Operates fr

30 MHz to 4.5 GHz, 45 dB RF Detector

FEATURES ► Complete RF detector function ► Typical dynamic range: 45 dB (±1.0 dB) ► Frequency range from 30 MHz to 4.5 GHz ► Excellent temperature stability ► Stable linear in decibel response ► Power on/off response time: 65 ns/145 ns (rise/fall) ► −5 dBm input power applied ► Operates fr

10 MHz to 12 GHz, 55 dB Logarithmic RF Power Detector

GENERAL DESCRIPTION The ADL5507 is a complete, low-power, wide-band logarithmic RF power detector for the measurement of RF signals in the 10 MHz to 12 GHz frequency range. The device is optimized for accurate RF signal level measurements over a 55 dB dynamic range, from −56 dBm to −1 dBm at

10 MHz to 12 GHz, 55 dB Logarithmic RF Power Detector

GENERAL DESCRIPTION The ADL5507 is a complete, low-power, wide-band logarithmic RF power detector for the measurement of RF signals in the 10 MHz to 12 GHz frequency range. The device is optimized for accurate RF signal level measurements over a 55 dB dynamic range, from −56 dBm to −1 dBm at

10 MHz to 12 GHz, 55 dB Logarithmic RF Power Detector

GENERAL DESCRIPTION The ADL5507 is a complete, low-power, wide-band logarithmic RF power detector for the measurement of RF signals in the 10 MHz to 12 GHz frequency range. The device is optimized for accurate RF signal level measurements over a 55 dB dynamic range, from −56 dBm to −1 dBm at

10 MHz to 12 GHz, 55 dB Logarithmic RF Power Detector

GENERAL DESCRIPTION The ADL5507 is a complete, low-power, wide-band logarithmic RF power detector for the measurement of RF signals in the 10 MHz to 12 GHz frequency range. The device is optimized for accurate RF signal level measurements over a 55 dB dynamic range, from −56 dBm to −1 dBm at

Envelope and TruPwr RMS Detector

GENERAL DESCRIPTION The ADL5511 is an RF envelope and TruPwr™ rms detector. The envelope output voltage is presented as a voltage that is proportional to the envelope of the input signal. The rms output voltage is independent of the peak-to-average ratio of the input signal. FEATURES Envelop

DC to 6 GHz Envelope and TruPwr RMS Detector

FEATURES ► Envelope tracking RF detector with output proportional to input voltage ► Separate TruPwr rms output ► No balun or external tuning required ► Excellent temperature stability ► Input power dynamic range of 47 dB ► Input frequency range from dc to 6 GHz ► 130 MHz envelope bandwidt

DC to 6 GHz Envelope and TruPwr RMS Detector

FEATURES ► Envelope tracking RF detector with output proportional to input voltage ► Separate TruPwr rms output ► No balun or external tuning required ► Excellent temperature stability ► Input power dynamic range of 47 dB ► Input frequency range from dc to 6 GHz ► 130 MHz envelope bandwidt

Envelope and TruPwr RMS Detector

GENERAL DESCRIPTION The ADL5511 is an RF envelope and TruPwr™ rms detector. The envelope output voltage is presented as a voltage that is proportional to the envelope of the input signal. The rms output voltage is independent of the peak-to-average ratio of the input signal. FEATURES Envelop

DC to 6 GHz Envelope and TruPwr RMS Detector

FEATURES ► Envelope tracking RF detector with output proportional to input voltage ► Separate TruPwr rms output ► No balun or external tuning required ► Excellent temperature stability ► Input power dynamic range of 47 dB ► Input frequency range from dc to 6 GHz ► 130 MHz envelope bandwidt

Envelope and TruPwr RMS Detector

GENERAL DESCRIPTION The ADL5511 is an RF envelope and TruPwr™ rms detector. The envelope output voltage is presented as a voltage that is proportional to the envelope of the input signal. The rms output voltage is independent of the peak-to-average ratio of the input signal. FEATURES Envelop

DC to 6 GHz Envelope and TruPwr RMS Detector

FEATURES ► Envelope tracking RF detector with output proportional to input voltage ► Separate TruPwr rms output ► No balun or external tuning required ► Excellent temperature stability ► Input power dynamic range of 47 dB ► Input frequency range from dc to 6 GHz ► 130 MHz envelope bandwidt

Low Cost, DC to 500 MHz, 92 dB Logarithmic Amplifier

FEATURES Complete multistage logarithmic amplifier 92 dB dynamic range: −75 dBm to +17 dBm to −90 dBm using matching network Single supply of 2.7 V minimum at 7.5 mA typical DC to 500 MHz operation, ±1 dB linearity Slope of 25 mV/dB, intercept of −84 dBm Highly stable scaling over temperature Fu

0.1 GHz to 2.5 GHz 70 dB Logarithmic Detector/Controller

FEATURES ► Wide bandwidth: 0.1 GHz to 2.5 GHz min ► High dynamic range: 70 dB to ±3.0 dB ► High accuracy: ±1.0 dB over 65 dB range (@ 1.9 GHz) ► Fast response: 40 ns full-scale typical ► Controller mode with error output ► Scaling stable over supply and temperature ► Wide supply range: 2.7

1 MHz to 4 GHz, 80 dB Logarithmic Detector/Controller

FEATURES ► Wide bandwidth: 1 MHz to 4 GHz ► 80 dB dynamic range (±3 dB) ► Constant dynamic range over frequency ► Stability over −40°C to +85°C temperature range: ±0.5 dB ► Operating temperature range: −40°C to +125°C ► Sensitivity: −70 dBm ► Low noise measurement/controller output (VOUT)

1 MHz to 4 GHz, 80 dB Logarithmic Detector/Controller

GENERAL DESCRIPTION The ADL5513 is a demodulating logarithmic amplifier, capable of accurately converting an RF input signal to a corresponding decibel-scaled output. It employs the progressive compression technique over a cascaded amplifier chain, each stage of which is equipped with a detecto

1 MHz to 4 GHz, 80 dB Logarithmic Detector/Controller

FEATURES ► Wide bandwidth: 1 MHz to 4 GHz ► 80 dB dynamic range (±3 dB) ► Constant dynamic range over frequency ► Stability over −40°C to +85°C temperature range: ±0.5 dB ► Operating temperature range: −40°C to +125°C ► Sensitivity: −70 dBm ► Low noise measurement/controller output (VOUT)