400 MHz to 4000 MHz

GENERAL DESCRIPTION The ADL5324 incorporates a dynamically adjustable biasing circuit that allows for the customization of OIP3 and P1dB performance from 3.3 V to 5 V, without the need for an external bias resistor. This feature gives the designer the ability to tailor driver amplifier performa

400 MHz至4000 MHz、½ W RF驱动器放大器

ADL5324内置动态可调偏置电路，能够在3.3 V至5 V范围内实现OIP3和P1dB性能定制，无需外部偏置电阻。借助此特性，设计人员可以根据具体设计需求定制驱动器放大器的性能。此特性还可以实现驱动器放大器的动态偏置，此时采用可变电源来在大信号条件下实现全5 V偏置，然后在信号电平较小且需要较低功耗时减小电源电压。此扩展能力可以减少针对不同输出功率（输出功率水平从25 dBm到29 dBm）要求来评估及库存多个驱动器放大器的需要。\n\n ADL5324的额定工作温度范围也是−40°C至+105°C宽温度范围，在功率放大器等工作温度更高的设计中性能也十分可靠。这款½ W驱动器放大器 • 工作电压范围：400 MHz至4000 MHz \n\n• 增益：14.6 dB (2140 MHz) \n\n• OIP3：43.1 dBm (2140 MHz) \n\n• P1dB：29.1 dBm (2140 MHz) \n\n• 噪声系数：3.8 dB \n\n• 工作温度范围：−40°C至+105℃ \n\n• 动态可调偏置\n   可调电源\n      偏置电压：3.3 V至5 V\n   低电源电流：\n      62 mA至133 mA\n   无需偏置电阻\n\n• SOT-89封装，符合MSL-1等级要求 \n\n• ESD额定值：±3 kV（2类）;

400 MHz to 4000 MHz

GENERAL DESCRIPTION The ADL5324 incorporates a dynamically adjustable biasing circuit that allows for the customization of OIP3 and P1dB performance from 3.3 V to 5 V, without the need for an external bias resistor. This feature gives the designer the ability to tailor driver amplifier performa

400 MHz to 4000 MHz

GENERAL DESCRIPTION The ADL5324 incorporates a dynamically adjustable biasing circuit that allows for the customization of OIP3 and P1dB performance from 3.3 V to 5 V, without the need for an external bias resistor. This feature gives the designer the ability to tailor driver amplifier performa

封装/外壳：TO-243AA 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC AMP ISM 400MHZ-4GHZ SOT89-3 RF/IF，射频/中频和 RFID 射频放大器

包装：盒 描述：EVAL BOARD RF AMP 4GHZ ADL5324 开发板，套件，编程器 射频评估和开发套件，开发板

2.5 V to 5.5 V, 230uA, Parallel Interface Dual Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5332/AD5333/AD5342/AD5343 are dual 8-, 10-, and 12-bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 230 µA at 3 V, and feature a power-down pin, PD that further reduces the current to 80 nA. These devices incorporate an on-chip output buffer that can dr

2.5 V to 5.5 V, 500 uA, Parallel Interface Quad Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5334/AD5335/AD5336/AD5344 are quad 8-, 10-, and 12-bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 500 µA at 3 V, and feature a power-down mode that further reduces the current to 80 nA. These devices incorporate an on-chip output buffer that can drive

NTE5326/NTE5327/NTE5328 Silicon Bridge Rectifier, Single-Phase, 25 Amp

Features: • Superior Thermal Design • Surge Overload Rating: 400A (Peak) • Hole Through for #8 Screw • Silverplated Copper Terminals

Silicon Bridge Rectifier, Single-Phase, 25 Amp

Features: ● Superior Thermal Design ● Surge Overload Rating: 400A (Peak) ● Hole Through for #8 Screw ● Silverplated Copper Leads

2.5 V to 5.5 V, 500 uA, 2-Wire Interface Quad Voltage Output, 8-/10-/12-Bit DACs

文件：427.29 Kbytes Page：20 Pages