24 MHz Rail-to-Rail Amplifiers with Shutdown Option

GENERAL DESCRIPTION The AD8646 and the AD8647 are the dual, and the AD8648 is the quad, rail-to-rail, input and output, single-supply amplifiers featuring low offset voltage, wide signal bandwidth, low input voltage, and low current noise. The AD8647 also has a low power shutdown function. FEATU

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

FEATURES Offset voltage: 2.5 mV maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nV/√Hz Wide bandwidth: 24 MHz Slew rate: 11 V/μs Short-circuit output current: 120 mA Qualified for automotive applications No phase reversal Low input bias current: 1 pA Low supply current per ampli

24MHz轨到轨放大器，带关断选择（双路提供低功耗关断功能）

AD8646、AD8647和AD8648分别是双路、双路和四路、轨到轨输入和输出、单电源放大器，具有低失调电压、宽信号带宽、低输入电压和低电流噪声等特性。AD8647还具有低功耗关断功能。\n\n 24 MHz带宽、低失调、低噪声和极低的输入偏置电流特性相结合，使这些放大器适合各种应用。滤波器、积分器、光电二极管放大器和高阻抗传感器等器件均可受益于这些特性组合。宽带宽和低失真特性则有益于交流应用。AD8646/AD8647/AD8648均具有高输出驱动能力，是音频线路驱动器和其它低阻抗应用的理想选择。AD8646和AD8648可以用于汽车应用。参见订购指南\n\n 具体应用 • 失调电压：2.5 mV（最大值）\n\n• 单电源供电：2.7 V至5.5 V\n\n• 低噪声：8 nV/√Hz \n\n• 宽带宽：24 MHz\n\n• 压摆率: 11 V/μs \n\n• 短路输出电流: 120 mA \n\n• 无反相\n\n• 低输入偏置电流: 1 pA \n\n• 低电源电流：\n低电流每个放大器2 mA（最大值）\n\n• 单位增益稳定;

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：513.799 Kbytes Page：18 Pages

丝印代码：A1W；24 MHz Rail-to-Rail Amplifiers with Shutdown Option

FEATURES Offset voltage: 2.5 mV maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nV/√Hz Wide bandwidth: 24 MHz Slew rate: 11 V/μs Short-circuit output current: 120 mA Qualified for automotive applications No phase reversal Low input bias current: 1 pA Low supply current per ampli

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

GENERAL DESCRIPTION The AD8646 and the AD8647 are the dual, and the AD8648 is the quad, rail-to-rail, input and output, single-supply amplifiers featuring low offset voltage, wide signal bandwidth, low input voltage, and low current noise. The AD8647 also has a low power shutdown function. FEATU

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

GENERAL DESCRIPTION The AD8646 and the AD8647 are the dual, and the AD8648 is the quad, rail-to-rail, input and output, single-supply amplifiers featuring low offset voltage, wide signal bandwidth, low input voltage, and low current noise. The AD8647 also has a low power shutdown function. FEATU

丝印代码：A1W；24 MHz Rail-to-Rail Amplifiers with Shutdown Option

FEATURES Offset voltage: 2.5 mV maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nV/√Hz Wide bandwidth: 24 MHz Slew rate: 11 V/μs Short-circuit output current: 120 mA Qualified for automotive applications No phase reversal Low input bias current: 1 pA Low supply current per ampli

24 MHz Rail-to-Rail Amplifiers

文件：520.7 Kbytes Page：20 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：392.57 Kbytes Page：20 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：513.799 Kbytes Page：18 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：513.799 Kbytes Page：18 Pages

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

文件：392.57 Kbytes Page：20 Pages

Ultra-Efficient Charge Pumps for Six White/RGB LEDs in 3mm x 3mm Thin QFN

General Description The MAX8647/MAX8648 drive up to six white LEDs or two sets of RGB LEDs with regulated constant current for display backlight and fun light applications. By utilizing an inverting charge pump and extremely low dropout adaptive current regulators, these ICs achieve very high eff

Ultra-Efficient Charge Pumps for Six White/RGB LEDs in 3mm x 3mm Thin QFN

General Description The MAX8647/MAX8648 drive up to six white LEDs or two sets of RGB LEDs with regulated constant current for display backlight and fun light applications. By utilizing an inverting charge pump and extremely low dropout adaptive current regulators, these ICs achieve very high eff

250MHz 10/11

250MHz ÷ 10/11 The SP8647 is an ECL variable modulus divider, with ECL10K and TTL/CMOS compatible outputs. It divides by 10 when either of the ECL control inputs, PE1 or PE2, is in the high state and by 11 when both are low (or open circuit). FEATURES ■ ECL Compatible Inputs/Output

250MHz 10/11

250MHz ÷ 10/11 The SP8647 is an ECL variable modulus divider, with ECL10K and TTL/CMOS compatible outputs. It divides by 10 when either of the ECL control inputs, PE1 or PE2, is in the high state and by 11 when both are low (or open circuit). FEATURES ■ ECL Compatible Inputs/Output

Ultra-Efficient Charge Pumps for Six White/RGB LEDs in 3mm x 3mm Thin QFN

文件：265.42 Kbytes Page：15 Pages