FLOWave SAW flowmeter

The Type 8098 flowmeter is part of the FLOWave product range. It is based on SAW Surface Acoustic Waves) technology and is mainly designed for applications with the highest hygienic demands. This is achieved by using suitable stainless steel materials, a measuring tube completely free of any in

Radar filling level meter for liquids and bulk solids suitable for use in applications with aggressive fluids or with hygienic requirements

The device Type 8140 is a non-contact radar level meter for continuous level measurement. The device is available with different antennas, connection types and sizes, making it useful for a wide range of applications. The variant with integrated antenna, available with G or NPT connection, is p

Modular process valve cluster – distributor and collector

Type 8840 comes with ready to install modules of tried and tested Bürkert process valves. The valve cluster, based on a modular valve body, allows different configurations. The individual parts are joined hermetically tight and in a very compact way. No installation effort for pipework, fitting

包装：盒 描述：VERTICAL GUIDE 90MM 盒子，外壳，机架 卡导引件

包装：盒 描述：VERTICAL GUIDE 90MM 盒子，外壳，机架 卡导引件

PCB 连接器

Ultra-Efficient Charge Pumps for Six White/RGB LEDs in 3mm x 3mm Thin QFN

General Description The MAX8647/MAX8648 drive up to six white LEDs or two sets of RGB LEDs with regulated constant current for display backlight and fun light applications. By utilizing an inverting charge pump and extremely low dropout adaptive current regulators, these ICs achieve very high eff

Ultra-Efficient Charge Pumps for Six White/RGB LEDs in 3mm x 3mm Thin QFN

General Description The MAX8647/MAX8648 drive up to six white LEDs or two sets of RGB LEDs with regulated constant current for display backlight and fun light applications. By utilizing an inverting charge pump and extremely low dropout adaptive current regulators, these ICs achieve very high eff

250MHz 10/11

250MHz ÷ 10/11 The SP8647 is an ECL variable modulus divider, with ECL10K and TTL/CMOS compatible outputs. It divides by 10 when either of the ECL control inputs, PE1 or PE2, is in the high state and by 11 when both are low (or open circuit). FEATURES ■ ECL Compatible Inputs/Output

250MHz 10/11

250MHz ÷ 10/11 The SP8647 is an ECL variable modulus divider, with ECL10K and TTL/CMOS compatible outputs. It divides by 10 when either of the ECL control inputs, PE1 or PE2, is in the high state and by 11 when both are low (or open circuit). FEATURES ■ ECL Compatible Inputs/Output

Ultra-Efficient Charge Pumps for Six White/RGB LEDs in 3mm x 3mm Thin QFN

文件：265.42 Kbytes Page：15 Pages