GERMANIUM POWER TRANSISTORS

文件：329 Kbytes Page：4 Pages

High Speed Active Load with Inhibit Mode

PRODUCT DESCRIPTION The AD1315 is a complete, high speed, current switching load designed for use in linear, digital or mixed signal test systems. By combining a high speed monolithic process with a unique surface mount package, this product attains superb electrical performance while preserving

集成抑制模式的高速有源负载

AD1315是一款完整的高速电流开关负载，设计用于线性、数字或混合信号测试系统。这款产品结合了高速单芯片工艺与独特的表贴封装，电气性能出色，同时提供较佳的封装密度。它采用超小型16引脚密封鸥翼封装。AD1315的电流可编程能力高达+50 mA，设计用于迫使被测器件针对编程后的IOHPROG和IOLPROG电流提供源电流或吸电流。通过在IOH和IOL引脚上施加相应电压(5 V = 50 mA)便可确定IOH和IOL电流。电压电流转换在AD1315器件内部完成，因此允许通过标准电压输出型数模转换器设置电流水平。\n\n当被测器件的输出电压摆动到超过或低于编程阈值或换向电压时，AD1315便进行IO

High Speed Active Load with Inhibit Mode

PRODUCT DESCRIPTION The AD1315 is a complete, high speed, current switching load designed for use in linear, digital or mixed signal test systems. By combining a high speed monolithic process with a unique surface mount package, this product attains superb electrical performance while preserving

Complete, High Speed 16-Bit A/D Converter

Complete, High Speed 16-Bit A/D Converter

Ultrahigh Speed Window Comparator with Latch

PRODUCT DESCRIPTION The AD1317 is an ultrahigh speed window comparator with a latch. It uses a high speed monolithic process to provide high dc accuracy without sacrificing input voltage range. The AD1317 guarantees a 2.8 ns maximum propagation delay. FEATURES Full Window Comparator 2.

具有锁存功能的超高速窗口比较器

AD1317是一款具有锁存功能的超高速窗口比较器。它使用高速单芯片工艺提供高直流精度，而不牺牲输入电压范围。AD1317确保具有最大值为2.8 ns的传播延迟。\n\n共模输入采用片内连接，无需使用第二个焊盘，且不需要为输入电容提供封装引脚，因此输入电容的最大值为2 pF。\n\n传播延迟随输入过驱电平和压摆率消散或变化，其典型值为350 ps（5 V输入信号）和200 ps（1 V输入信号）。\n\nAD1317采用高精度差分输入级，共模范围为9 V。其互补数字输出兼容ECL。输出级可驱动50 W线路终端至–2 V。它还提供锁存功能，允许在采样-保持模式下工作。锁存输入还可用于产生迟滞。\n

Ultrahigh Speed Window Comparator with Latch

PRODUCT DESCRIPTION The AD1317 is an ultrahigh speed window comparator with a latch. It uses a high speed monolithic process to provide high dc accuracy without sacrificing input voltage range. The AD1317 guarantees a 2.8 ns maximum propagation delay. FEATURES Full Window Comparator 2.

Complete, High Speed 16-Bit A/D Converter

POWER TRANSISTORS(8.0A,60-100V,70W)

PLASTIC MEDIUM-POWER COMPLEMENTARY SILICON TRANSISTORS 8.0 AMPERE DARLINGTON COMPLEMENTARY SILICON POWER TRANSISTORS 60-100 VOLTS 70 WATTS

L-BAND SPDT SWITCH

DESCRIPTION UPG133G is an L-Band SPDT (Single Pole Double Throw) GaAs FET switch which was developed for digital cellular or cordless telephone application. The device can operate from 100 MHz to 2.5 GHz, having the low insertion loss. It housed in an original 8 pin SSOP that is smaller than us

L-BAND DPDT MMIC SWITCH

DESCRIPTION The µPG139GV is L-Band Double Pole, Double Throw (DPDT) switch developed for digital cellular or cordless telephone and PCS applications. This device feature low insertion loss, high handling power with low voltage operation. It is housed in a very small 8-pin plastic SSOP package ava

L-BAND SPDT SWITCH

DESCRIPTION µPG132G is an L-Band SPDT (Single Pole Double Throw) GaAs FET switch which was developed for digital cellular or cordless telephone application. The device can operate from 100 MHz to 2.5 GHz, having the low insertion loss. It housed in an original 8 pin SSOP that is smaller than us

L-BAND SPDT SWITCH

DESCRIPTION UPG133G is an L-Band SPDT (Single Pole Double Throw) GaAs FET switch which was developed for digital cellular or cordless telephone application. The device can operate from 100 MHz to 2.5 GHz, having the low insertion loss. It housed in an original 8 pin SSOP that is smaller than us