2.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated (VCE) Desaturation Detection, UVLO Fault Status Feedback and Active Miller Clamping

Description The ACPL-332J is an advanced 2.5 A output current, easy to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under voltage lockout (UVLO), “soft” IGBT turn-off, isolated open coll

2.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated (VCE) Desaturation Detection, UVLO Fault Status Feedback and Active Miller Clamping

Description The ACPL-332J is an advanced 2.5 A output current, easy to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under voltage lockout (UVLO), “soft” IGBT turn-off, isolated open coll

2.5 Amp Output Current IGBT Gate Driver Optocoupler

Description The ACPL-332J is an advanced 2.5 A output current, easy to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under voltage lockout (UVLO), “soft” IGBT turn-off, isolated open coll

输出电流为 2.5Amp 的 IGBT 门驱动光电耦合器， 配有集成去饱和 (VCE) 检测、故障状态反馈系统和有源米勒箝位器件。

ACPL-332J 光电耦合器是一款高端易用型智能门驱动器，输出电流为 2.5A，可设计用于小巧、经济且易于实现的 IGBT VCE故障保护系统中。 集成 VCE 检测、欠压锁定 (UVLO)、IGBT“软”关断、集电极开路故障反馈、有源米勒箝位等特性可最大限度地提供设计灵活性与电路保护。 \n\nACPL-332J 内含一个 GaAsP LED。该 LED 与一个功率输出级集成电路进行光电耦合。ACPL-332J 可作为电机控制变频器应用中驱动功率 IGBT 和 MOSFET 的理想选择。这些光电耦合器提供的电压和电流非常适合用来直接驱动规格达 1200V/150A 的 IGBT。对于额定值 ·带滞后欠压锁定 (UVLO)保护\n·去饱和检测\n·米勒箝位\n·集电极开路故障反馈\n·IGBT “软”关断\n·由下一个 IGBT 开通周期进行故障复位\n·可按 SO-16 封装供应\n·安全规范认证：\n- IEC/EN/DIN-EN 60747-5-2 规范申请中 VIORM = 891VPEAK ，\n- UL 规范申请中，3750 VRMS/1 min，\n- CSA 规范申请中\n·可选方案包括：\n- 500 = 卷带式封装方案\n- xxxE = 无铅方案;

2.5 Amp Output Current IGBT Gate Driver Optocoupler

Description The ACPL-332J is an advanced 2.5 A output current, easy to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under voltage lockout (UVLO), “soft” IGBT turn-off, isolated open coll

SIPMOS Power Transistor(N Channel)

SIPMOS ® Power Transistor • N channel • Enhancement mode • Avalanche-rated

N-CHANNEL POWER MOSFETS

FEATURES ● Low RDS(on) ● Improved inductive ruggedness ● Fast switching times ● Rugged polysilicon gate cell structure ● Low Input capacitance ● Extended safe operating area ● Improved high temperature reliability ● TO-3 package (Standard)

Silicon Complementary Transistors Audio Power Amp, Switch

Description: The NTE331 (NPN) and NTE332 (PNP) are silicon epitaxial–base complementary power transistors in a TO–220 plastic package intended for use in power linear and switching applications.

Direct Drive Voice/Dual Tone Melody Controller?

INTRODUCTION SNC353 is a 1-channel voice synthesizer and dual-tone melody IC with PWM direct drive circuit. It built-in a 4-bit tiny controller with one 4-bit input port and two 4-bit I/O ports. By programming through the tiny controller in SNC353, user’s varied applications including voice secti

RS-232/RS-485 Multi-Mode Serial Transceiver

DESCRIPTION… The SP332 is a monolithic device that contains both RS-232 and RS-485 line drivers and receivers. The configuration of the SP332 can be changed at any time by changing the logic state of two control input pins. The device also includes a loop back function which internally connects