MULTILAYER Ceramic Chip Inductor

文件：152.86 Kbytes Page：4 Pages

AXL E PB DI8 DO8 M12 6M

文件：294.23 Kbytes Page：17 Pages

包装：线轴 描述：HF1 3/8 TYPE B 100' COIL GRAY 电缆，电线 - 管理 保护软管，实心管，衬套

包装：散装 描述：HEX STANDOFF #8-32 ALUMINUM 7/8\ 五金件，紧固件，配件 板垫片，支座

Heyco-Flex™ I Liquid Tight Conduit

文件：123.91 Kbytes Page：1 Pages

FemtoClock® NG Crystal-to-3.3V LVPECL Clock Generator

GENERAL DESCRIPTION The 843001 is a Fibre Channel Clock Generator and a member of the family of high performance devices from IDT. The 843001 uses either a 26.5625MHz or a 23.4375 crystal to synthesize 106.25MHz, 187.5MHz or 212.5MHz, using the FREQ_SEL pin. The 843001 has excellent

FemtoClocks™ Crystal-to-3.3V LVPECL Frequency Synthesizer

Description The 843001-21 is a a highly versatile, low phase noise LVPECL Synthesizer which can generate low jitter reference clocks for a variety of communications applications. The dual crystal interface allows the synthesizer to support up to two communications standards in a given applica

FEMTOCLOCK™ CRYSTAL-TO- 3.3V, 2.5V LVPECL CLOCK GENERATOR

FEATURES • One differential LVPECL output pair • Crystal oscillator interface designed for 23.4375MHz or 26.5625MHz, 18pF parallel resonant crystal • Selectable 106.25MHz, 187.5MHz or 212.5MHz output frequencies • VCO range: 560MHz - 680MHz • RMS phase jitter @ 106.25MHz, using a 26.5625MHz

FEMTOCLOCK™ CRYSTAL-TO- 3.3V, 2.5V LVPECL CLOCK GENERATOR

FEATURES • One differential LVPECL output pair • Crystal oscillator interface designed for 23.4375MHz or 26.5625MHz, 18pF parallel resonant crystal • Selectable 106.25MHz, 187.5MHz or 212.5MHz output frequencies • VCO range: 560MHz - 680MHz • RMS phase jitter @ 106.25MHz, using a 26.5625MHz

FemtoClock™ Crystal/LVCMOS-to-3.3V, 2.5V LVPECL Frequency Synthesizer

General Description The 843001I-22 is a a highly versatile, low phase noise LVPECL/LVCMOS Synthesizer which can generate low jitter reference clocks for a variety of communications applications and is a member of the family of high performance clock solutions from IDT. The dual crystal interf

Femtoclock® Crystal-to-3.3V LVPECL Frequency Synthesizer

FEATURES • Two 3.3V LVPECL outputs • Selectable crystal oscillator interface or LVCMOS/LVTTL single-ended input • Supports the following output frequencies: 212.5MHz, 187.5MHz, 159.375MHz, 106.25MHz and 53.125MHz • VCO range: 560MHz - 680MHz • RMS phase jitter (637kHz - 10MHz): 0.72ps (typi

FemtoClock® Crystal-to-3.3V LVPECL Frequency Synthesizer

GENERAL DESCRIPTION The 843002-01 is a 2 output LVPECL synthesizer optimized to generate Ethernet reference clock frequencies. Using a 25MHz 18pF parallel resonant crystal, the following frequencies can be generated based on the 2 frequency select pins (F_SEL[1:0]): 156.25MHz, 125MHz, and 62.

Femtoclock® Crystal-to-3.3V LVPECL Frequency Synthesizer

FEATURES • Two 3.3V LVPECL outputs • Selectable crystal oscillator interface or LVCMOS/LVTTL single-ended input • Supports the following output frequencies: 212.5MHz, 187.5MHz, 159.375MHz, 106.25MHz and 53.125MHz • VCO range: 560MHz - 680MHz • RMS phase jitter (637kHz - 10MHz): 0.72ps (typi

Femtoclock® Crystal-to-3.3V LVPECL Frequency Synthesizer

FEATURES • Two 3.3V LVPECL outputs • Selectable crystal oscillator interface or LVCMOS/LVTTL single-ended input • Supports the following output frequencies: 212.5MHz, 187.5MHz, 159.375MHz, 106.25MHz and 53.125MHz • VCO range: 560MHz - 680MHz • RMS phase jitter (637kHz - 10MHz): 0.72ps (typi

FEMTOCLOCKS™ VCXO BASED WCDMA CLOCK GENERATOR/JITTER ATTENUATOR

FEATURES • Two differential LVPECL outputs • CLK input accepts the following input levels: LVCMOS or LVTTL levels • Output frequency: 122.88MHz (typical) • FemtoClock VCO frequency range: 490MHz - 680MHz • RMS phase jitter @ 122.88MHz, using a 19.2MHz crystal (1.875MHz to 10MHz): 0.49ps (ty

FEMTOCLOCKS™ VCXO BASED WCDMA CLOCK GENERATOR/JITTER ATTENUATOR

FEATURES • Two differential LVPECL outputs • CLK input accepts the following input levels: LVCMOS or LVTTL levels • Output frequency: 122.88MHz (typical) • FemtoClock VCO frequency range: 490MHz - 680MHz • RMS phase jitter @ 122.88MHz, using a 19.2MHz crystal (1.875MHz to 10MHz): 0.49ps (ty

FemtoClockTM Crystal-To-3.3V, 2.5V

GENERAL DESCRIPTION T h e 8 4 3 0 0 2 I i s a 2 o u t p u t LV P E C L s y n t h e s i ze r optimized to generate Fibre Channel reference clock frequencies and is a member of thefamily of high performance clock solutions from IDT. Using a 26.5625MHz, 18pF parallel resonant crystal, the follow

FemtoClocks® Crystal-to3.3V, 2.5V LVPECL Frequency Synthesizer

GENERAL DESCRIPTION The 843002I-01 is a 2 output LVPECL synthesizer optimized to generate Ethernet reference clock frequencies. Using a 25MHz 18pF parallel resonant crystal, the following frequencies can be generated based on the 2 frequency select pins (F_SEL[1:0]): 156.25MHz, 125MHz, and 62

175MHz, FemtoClock® VCXO Based Sonet/SDH Jitter Attenuators

General Description The ICS843002I-40 is a PLL based synchronous clock generator that is optimized for SONET/SDH line card applications where jitter attenuation and frequency translation is needed. The device contains two internal PLL stages that are cascaded in series. The first PLL stage us

700MHZ, FemtoClock® VCXO Based Sonet/SDH Jitter Attenuators

General Description The ICS843002I-41 is a PLL based synchronous clock generator that is optimized for SONET/SDH line card applications where jitter attenuation and frequency translation is needed. The device contains two internal PLL stages that are cascaded in series. The first PLL stage us

FemtoClocks™ Crystal-to-3.3V LVPECL Frequency Synthesizer

General Description The 843003 is a 3 differential output LVPECL Synthesizer designed to generate Ethernet refer- ence clock frequencies. Using a 31.25MHz or 26.041666MHz, 18pF parallel resonant crystal, the following frequencies can be generated based on the settings of 4 fre- quency select

FemtoClock® Crystal-to-3.3V LVPECL Frequency Synthesizer

GENERAL DESCRIPTION The 843003i-01 is a 3 differential output LVPECL Synthesizer designed to generate Ethernet reference clock frequencies. Using a 19.53125MHz or 25MHz, 18pF parallel resonant crystal, the following frequencies can be generated based on the settings of 4 frequency select pins

FemtoClocks™ LVCMOS/Crystal-to-3.3V LVPECL Frequency Synthesizer

General Description The 843004 is a 4 output LVPECL synthesizer optimized to generate Fibre Channel reference clock frequencies and is a member of the HiPerClocksTM family of high performance clock solutions from IDT. Using a 26.5625MHz 18pF parallel resonant crystal, the following frequencie

Femtoclocks® Crystal-to-3.3V LVPECL Frequency Synthesizer

GENERAL DESCRIPTION The 843004-01 is a 4 output LVPECL synthesizer optimized to generate Ethernet reference clock frequencies and is a member of the family of high performance clock solutions from IDT. Using a 25MHz 18pF parallel resonant crystal, the following frequencies can be generated ba

FemtoClock® Crystal-to-3.3V LVPECL Frequency Synthesizer

FEATURES • Four 3.3V LVPECL output pairs • Selectable crystal oscillator interface or LVCMOS/LVTTL single-ended input • Crystal oscillator designed for 25MHz, 18pF parallel resonant crystal • Supports the following output frequency: 125MHz • VCO range: 560MHz - 680MHz • RMS phase jitter @

FemtoClock® Crystal-to-3.3V LVPECL Frequency Synthesizer

FEATURES • Four 3.3V LVPECL output pairs • Selectable crystal oscillator interface or LVCMOS/LVTTL single-ended input • Crystal oscillator designed for 25MHz, 18pF parallel resonant crystal • Supports the following output frequency: 125MHz • VCO range: 560MHz - 680MHz • RMS phase jitter @

FemtoClock® Crystal-to-3.3V LVPECL Frequency Synthesizer

FEATURES • Four 3.3V LVPECL output pairs • Selectable crystal oscillator interface or LVCMOS/LVTTL single-ended input • Crystal oscillator designed for 25MHz, 18pF parallel resonant crystal • Supports the following output frequency: 125MHz • VCO range: 560MHz - 680MHz • RMS phase jitter @

FemtoClock® Crystal-to-3.3V, 2.5V LVPECL Frequency Synthesizer

Features • Four 3.3V differential LVPECL output pairs • Selectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input • Supports the following output frequencies: 156.25MHz, 125MHz, 62.5MHz • VCO range: 560MHz – 680MHz • RMS phase jitter @ 156.25MHz, using a 25MHz crystal

FemtoClock® Crystal-to-3.3V, 2.5V LVPECL Frequency Synthesizer

Features • Four 3.3V differential LVPECL output pairs • Selectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input • Supports the following output frequencies: 156.25MHz, 125MHz, 62.5MHz • VCO range: 560MHz – 680MHz • RMS phase jitter @ 156.25MHz, using a 25MHz crystal

FemtoClock® Crystal-to-3.3V, 2.5V LVPECL Frequency Synthesizer

Features • Four 3.3V differential LVPECL output pairs • Selectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input • Supports the following output frequencies: 156.25MHz, 125MHz, 62.5MHz • VCO range: 560MHz – 680MHz • RMS phase jitter @ 156.25MHz, using a 25MHz crystal

FemtoClock® Crystal-to-3.3V, 2.5V LVPECL Frequency Synthesizer

Features • Four 3.3V differential LVPECL output pairs • Selectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input • Supports the following output frequencies: 156.25MHz, 125MHz, 62.5MHz • VCO range: 560MHz – 680MHz • RMS phase jitter @ 156.25MHz, using a 25MHz crystal

FemtoClock® LVCMOS/Crystal-to-3.3V, 2.5V LVPECL Frequency Synthesizer

General Description The 843004I is a 4 output LVPECL synthesizer optimized to generate Fibre Channel reference clock frequencies. Using a 26.5625MHz 18pF parallel resonant crystal, the following frequencies can be generated based on the two frequency select pins (F_SEL[1:0]): 212.5MHz, 187.5M

FemtoClock® Crystal-to-3.3V, 2.5V LVPECL Frequency Synthesizer

Features • Four 3.3V differential LVPECL output pairs • Selectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input • Supports the following output frequencies: 156.25MHz, 125MHz, 62.5MHz • VCO range: 560MHz – 680MHz • RMS phase jitter @ 156.25MHz, using a 25MHz crystal

FemtoClock® Crystal/LVCMOS-to3.3V LVPECL Frequency Synthesizer

GENERAL DESCRIPTION The 843004I-04 is a 4 output LVPECL Synthesizer optimized to generate clock frequencies for a variety of high performance applications. This device can select its input reference clock from either a crystal input or a single-ended clock signal. It can be confi gured to gen

FemtoClock® Crystal-to-3.3V LVPECL Clock Generator

GENERAL DESCRIPTION The 843011 is a Fibre Channel Clock Generator. The 843011 uses a 26.5625MHz crystal to synthesize 106.25MHz or a 25MHz crystal to synthesize 100MHz. The 843011 has excellent

FemtoClock® Crystal-to-3.3V LVPECL Clock Generator

General Description The 843021 is a Gigabit Ethernet Clock Generator. The ICS84302 uses a 25MHz crystal to synthesize 125MHz. The 843021has excellent phase jitter performance, over the 1.875MHz – 20MHz integration range. The 843021is packaged in a small 8-pin TSSOP, making it ideal for use in

FemtoClock® Crystal-to-3.3V, 2.5V LVPECL Clock Generator

General Description The 843021I-01 is a Gigabit Ethernet Clock Generator. The 843021I-01 uses a 25MHz crystal to synthesize 125MHz. The 843021I-01 has excellent phase jitter performance, over the 1.875MHz – 20MHz integration range. The 843021I-01 is packaged in a small 8-pin TSSOP, making it

FemtoClock® Crystal-to-3.3V LVPECL Clock Generator

GENERAL DESCRIPTION The 843022 is a Gigabit Ethernet Clock Generator and a member of the HiPerClocksTM family of high performance devices from IDT. The 843022 uses a 25MHz crystal to synthesize 125MHz or 62.5MHz. The 843022 has excellent phase jitter performance, over the 1.875MHz – 20MHz int

FemtoClock® Crystal-to-3.3V, 2.5V LVPECL Clock Generator

GENERAL DESCRIPTION The 843022I-02 is a Gigabit Ethernet Clock Generator. The 843022I-02 uses a 25MHz crystal to synthesize 125MHz or 62.5MHz. The 843022I-02 has excellent phase jitter performance, over the 12kHz – 20MHz integration range. The 843022I-02 is packaged in a small 16-pin VFQFN, ma

FemtoClock® Crystal-to-3.3V, 2.5V LVPECL Clock Synthesizer

GENERAL DESCRIPTION The 843022I-48 is a Fibre Channel Clock Generator. The 843022I-48 uses a 25MHz crystal to synthesize 125MHz or 75MHz. The 843022I-48 has excellent phase jitter perform-ance, over the 12kHz – 20MHz integration range. The 843022I-48 is packaged in a small 8-pin TSSOP, making

FemtoClock® Crystal-to-3.3V LVPECL Clock Generator

GENERAL DESCRIPTION The 843023 is a Gigabit Ethernet Clock Generator and a member of the HiPerClocksTM family of high performance devices from IDT. The 843023 uses a 25MHz crystal to synthesize 250MHz. The 843023 has excellent phase jitter performance, over the 1.875MHz – 20MHz integration ra

FemtoClock® Crystal-to-3.3V, 2.5V LVPECL Clock Generator

GENERAL DESCRIPTION The 843023I is a Gigabit Ethernet Clock Generator and a member of the HiPerClocksTM family of high performance devices from IDT. The 843023I uses a 25MHz crystal to synthesize 250MHz. The 843023I has excellent phase jitter performance, over the 1.875MHz – 20MHz integration

FemtoClock® Crystal-to-3.3V LVPECL Frequency Synthesizer

GENERAL DESCRIPTION The 8430252-45 is a 2 output LVPECL and LVCMOS/LVTTL Synthesizer optimized to generate Ethernet reference clock frequencies . Using a 25MHz, 18pF parallel resonant crystal, the following fre-quencies can be generated: 156.25MHz LVPECL output and, 125MHz LVCMOS output. The

FemtoClock® Crystal-to-3.3V LVPECL Frequency Synthesizer

GENERAL DESCRIPTION The 8430252I-45 is a 2 output LVPECL and LVCMOS/LVTTL Synthesizer optimized to generate Ethernet reference clock frequencies. Using a 25MHz, 18pF parallel resonant crystal, the following fre-quencies can be generated: 156.25MHz LVPECL output and, 125MHz LVCMOS output. The

50 Ohm Coax, RG303, 19 AWG Solid SCCCS, SCC Braid, FEP Jacket, CL2P

Product Description RG-303/U, 19 AWG solid .037 silver-coated copper-covered steel conductor, plenum, TFE insulation, silver-coated copper braid shield (95 coverage), FEP jacket, commercial non-QPL product.

50 Ohm Coax, RG303, 19 AWG Solid SCCCS, SCC Braid, FEP Jacket, CL2P

Product Description RG-303/U, 19 AWG solid .037 silver-coated copper-covered steel conductor, plenum, TFE insulation, silver-coated copper braid shield (95 coverage), FEP jacket, commercial non-QPL product.

50 Ohm Coax, RG303, 19 AWG Solid SCCCS, SCC Braid, FEP Jacket, CL2P

Product Description RG-303/U, 19 AWG solid .037 silver-coated copper-covered steel conductor, plenum, TFE insulation, silver-coated copper braid shield (95 coverage), FEP jacket, commercial non-QPL product.

FemtoClock® Crystal-to-3.3V LVPECL Clock Generator

GENERAL DESCRIPTION The 843031 is a 1 Gigabit Ethernet Clock Generator. The 843031 can synthesize 1 Gigabit Ethernet, SONET, or Serial ATA reference clock frequencies with the appropriate choice of crystal and output divider. The 843031 has excellent phase jitter performance and is packaged i

FemtoClocks® Crystal-to-3.3V, 2.5V LVPECL Clock Generator

GENERAL DESCRIPTION The 843031-01 is an 10Gb Ethernet Clock Generator and a member of the family of high performance devices from IDT. The 843031-01 uses an 18pF parallel resonant crystal. The 843031-01 has excellent

FemtoClock® Crystal-to-3.3V, 2.5V LVPECL Clock Generator

GENERAL DESCRIPTION The 843031I-01 is an 10Gb Ethernet Clock Generator. The 843031I-01 uses an 18pF parallel resonant crystal. The 843031I-01 has excellent

FemtoClock® Multi-Rate 3.3V, 2.5V LVPECL Frequency Synthesizer

General Description The 843034 is a general purpose, low phase noise LVPECL synthesizer which can generate frequencies for a wide variety of applications. The 843034 has a 4:1 input Multiplexer from which the following inputs can be selected: one differential input, one single-ended input, or

FemtoClock™ Multi-Rate 3.3V LVPECL Frequency Synthesizer

GENERAL DESCRIPTION The 843034-06 is a general purpose, low phase noise LVPECL synthesizer which can generate frequencies for a wide variety of applications. The 843034-06 has a 4:1 input multiplexer from which the following inputs can be selected: one differential input, one single-ended inp

FemtoClock™ Multi-Rate 3.3V LVPECL Frequency Synthesizer

GENERAL DESCRIPTION The 843034I-06 is a general purpose, low phase noise LVPECL synthesizer which can generate frequencies for a wide variety of applications. The 843034I-06 has a 4:1 input multiplexer from which the following inputs can be selected: one differential input, one single-ended i

FemtoClock® Crystal-to-3.3V LVPECL Clock Generator

General Description The 843051 is a Gigabit Ethernet Clock Generator. The 843051 can synthesize 10 Gigabit Ethernet, SONET, or Serial ATA reference clock frequencies with the appropriate choice of crystal and output divider. The 843051 has excellent phase jitter performance and is packaged in

500MHz, Crystal-to-3.3V, 2.5V Differential LVPECL Frequency Synthesizer

FEATURES • Dual differential 3.3V or 2.5V LVPECL outputs • Selectable crystal oscillator interface or LVCMOS/LVTTL TEST_CLK • Output frequency range: 20.83MHz to 500MHz • Crystal input frequency range: 14MHz to 27MHz • VCO range: 250MHz to 500MHz • Parallel or serial interface for programmi

FemtoClock® Crystal-to-3.3V, 2.5V LVPECL Clock Generator

Features • One differential 3.3V or 2.5V LVPECL output • Crystal oscillator interface,18pF parallel resonant crystal (20.833MHz – 28.3MHz) • Output frequency range: 62.5MHz – 170MHz • VCO range: 500MHz – 680MHz • RMS phase jitter at 150MHz, using a 25MHz crystal (12kHz – 20MHz): 0.64ps (typ

FemtoClock® Crystal-to-3.3V, 2.5V LVPECL Clock Generator

Features • One differential 3.3V or 2.5V LVPECL output • Crystal oscillator interface,18pF parallel resonant crystal (20.833MHz – 28.3MHz) • Output frequency range: 62.5MHz – 170MHz • VCO range: 500MHz – 680MHz • RMS phase jitter at 150MHz, using a 25MHz crystal (12kHz – 20MHz): 0.64ps (typ

FemtoClock® Crystal-to-3.3V, 2.5V LVPECL Clock Generator

Features • One differential 3.3V or 2.5V LVPECL output • Crystal oscillator interface,18pF parallel resonant crystal (20.833MHz – 28.3MHz) • Output frequency range: 62.5MHz – 170MHz • VCO range: 500MHz – 680MHz • RMS phase jitter at 150MHz, using a 25MHz crystal (12kHz – 20MHz): 0.64ps (typ

FemtoClock® Crystal-to-2.5V, 3.3V LVPECL Clock Multiplier

GENERAL DESCRIPTION The 843081I-01 is an Ethernet Clock Multiplier. The 843081I-01 accepts a crystal reference of 19.6MHz - 28MHz. The 843081I01 has excellent 1ps or lower phase jitter performance, over the 1.875MHz - 20MHz integration range. The 843081I-01 is packaged in a small 8-pin TSSOP,

500MHz, Crystal-to-3.3V, 2.5V Differential LVPECL Frequency Synthesizer

FEATURES • Dual differential 3.3V or 2.5V LVPECL outputs • Selectable crystal oscillator interface or LVCMOS/LVTTL TEST_CLK • Output frequency range: 20.83MHz to 500MHz • Crystal input frequency range: 14MHz to 27MHz • VCO range: 250MHz to 500MHz • Parallel or serial interface for programmi