LAN 1000 Base T Dual Port Magnetic Modules

• Designed for Ethernet 100/1000 Base-T full duplex applications • Supports 4 pairs of category 5 UTP cable • Cable interface for isolation and low common mode emissions • Compliant with IEEE 802.3ab standard for 1000 Base-T • Supports 1:1 Turns Ratio Transceivers • Isolation voltag

1000 Base T Dual Port Magnetic module

文件：625.76 Kbytes Page：2 Pages

包装：散装 描述：HEAVY DUTY HAND PAD 7440 6X9\ 工具 磨料和表面修整产品

线缆线束

800mA 1.5MHz Synchronous Step-Down Converter

GENERAL DESCRIPTION The SP6669 is a synchronous current mode PWM step down (buck) converter capable of delivering up to 800mA of current and optimized for portable battery-operated applications. Based on a current-mode 1.5MHz constant frequency PWM control scheme, the SP6669 reduces the overall

Spezifikation f체r Freigabe / specification for release

description : POWER-CHOKE WE-TPC ambient temperature: -40°C - + 85°C It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions. G Eigenschaften / general specifications: Betriebstemp. / operating temperature: -40°C - + 125°C

Spezifikation f체r Freigabe / specification for release

description : POWER-CHOKE WE-TPC

POWER-CHOKE WE-TPC

description : POWER-CHOKE WE-TPC

WE-LQ SMT Power Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-LQS SMT Semi-Shielded Power Inductor

General Information: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-LQS SMD Power Inductor

E General information: It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions. •Ambient temperature: -40°C to +85°C (refering to IR) •Operating temperature: -40°C to +125°C •Storage temperature (on tape & reel): -20°C to +60°C; 75 RH max

Cost and Size Optimized PMIC for SAMA5DX/SAM9X6/SAMA7G Series MPUs

Applications • High-Performance MPUs Power Supply Solutions • μC/μP, FPGA and DSP Power

WE-LQS SMD Power Inductor

WE-LQS SMD Power Inductor

WE-LQS SMT Semi-Shielded Power Inductor

General Information: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-LQS SMT Semi-Shielded Power Inductor

General Information: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-LQS SMT Semi-Shielded Power Inductor

General Information: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-LQS SMT Semi-Shielded Power Inductor

General Information: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-LQS SMT Semi-Shielded Power Inductor

General Information: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-LQS SMT Semi-Shielded Power Inductor

General Information: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-LQS SMT Semi-Shielded Power Inductor

General Information: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-LQS SMT Semi-Shielded Power Inductor

General Information: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

80V, 300mA, 5.5μA IQ DC/DC Step-Down Regulator

▪ 7V to 80V input supply range ▪ Up to 300mA output current ▪ IQ = 5.5μA at 80V, at no load conditions, switching ▪ IQ = 4.5μA at 80V at no load and no switching conditions ▪ RAA211803 is fixed 3.3V VOUT, RAA211805 is fixed 5V VOUT ▪ Minimum on-time of 75ns ▪ Variable frequency operation,

WE-LQS SMT Semi-Shielded Power Inductor

General Information: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

iMOTION™ Modular Application Design Kit

EVAL-M3-IM564 is an evaluation board for motor drive applications with single-phase, integrated PFC and 3- phase IPM. Combined in a kit with one of the available MADK control board options, it demonstrates Infineon’s motion control IC and IPM technology for motor drives with single-phase PFC. M

WE-LQS SMT Semi-Shielded Power Inductor

General Information: Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-LQS SMT Semi-Shielded Power Inductor

General Information: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TPC SMT Shielded Tiny Power Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +95 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

36V/24V/19V High Efficiency Step-Up LED Driver with PWM Control

Features • Wide output range: up to 10 series LEDs • Integrated 40V high current switch (800mA limit) • High efficiency PWM converter (up to 90) • Low 200mV feedback voltage • High accuracy across full load range • VIN range: 2.7V to 5.5V • LED open-circuit (OVP) protection − KTD251: 36

36V/24V/19V High Efficiency Step-Up LED Driver with PWM Control

Features  Wide output range: up to 10 series LEDs  Integrated 40V high current switch (800mA limit)  High efficiency PWM converter (up to 90)  Low 200mV feedback voltage  High accuracy across full load range  VIN range: 2.7V to 5.5V  LED open-circuit (OVP) protection − KTD2536: 3

36V/24V/19V High Efficiency Step-Up LED Driver with PWM Control

Features  Wide output range: up to 10 series LEDs  Integrated 40V high current switch (800mA limit)  High efficiency PWM converter (up to 90)  Low 200mV feedback voltage  High accuracy across full load range  VIN range: 2.7V to 5.5V  LED open-circuit (OVP) protection − KTD2531: 3

WE-TPC SMT Shielded Tiny Power Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +95 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TPC SMT Shielded Tiny Power Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +95 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TPC SMT Shielded Tiny Power Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +95 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TPC SMT Shielded Tiny Power Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +95 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-LQ SMT Power Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-LQ SMT Power Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-LQ SMT Power Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

Cost and Size Optimized PMIC for SAMA5DX/SAM9X6/SAMA7G Series MPUs

Applications • High-Performance MPUs Power Supply Solutions • μC/μP, FPGA and DSP Power

WE-LQSH SMT Semi-Shielded High Saturation Power Inductor

General Information: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TPC SMT Shielded Tiny Power Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +95 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

12V, 1.5A Step-Down DC/DC Converter

General Description The AAT1162 is an 800kHz high efficiency step-down DC/DC converter. With a wide input voltage range of 4.0V to 13.2V, the AAT1162 is an ideal choice for dualcell Lithium-ion battery-powered devices and mid-power-range regulated 12V-powered industrial applications. The internal

1.2A, 24V, 1.4MHz Step-Down Converter in a TSOT23-6

DESCRIPTION The MP2359 is a monolithic step-down switch mode converter with a built-in power MOSFET. It achieves 1.2A peak output current over a wide input supply range with excellent load and line regulation. Current mode operation provides fast transient response and eases loop stabilization.

MachFlex™, 111G C #14 Str BC, PVC-NYL Ins, TPE Jkt, 1000V WTTC,600V TC-ER

Product Description MachFlex™ for High Flex, 11+1G Conductor 14AWG (41x30) Bare Copper, PVC-NYL Insulation, TPE Outer Jacket, 1000V WTTC, 600V TC-ER

包装：外壳 描述：THT-RCC DESIGN KIT 套件 电感器套件

Spezifikation f체r Freigabe / specification for release

文件：133.18 Kbytes Page：3 Pages

WE-TPC SMD Shielded Tiny Power Inductor

文件：271.04 Kbytes Page：5 Pages

POWER-CHOKE WE-TPC

文件：133.59 Kbytes Page：3 Pages

TPC SMT Tiny Power Inductor

TPC SMT Tiny Power Inductor

POWER-CHOKE WE-TPC

文件：133.31 Kbytes Page：3 Pages

POWER-CHOKE WE-TPC

文件：133.38 Kbytes Page：3 Pages

POWER-CHOKE WE-TPC

文件：132.91 Kbytes Page：3 Pages

Spezifikation f체r Freigabe / specification for release

文件：87.91 Kbytes Page：4 Pages

Spezifikation f체r Freigabe / specification for release

文件：87.91 Kbytes Page：4 Pages

POWER-CHOKE WE-TPC

文件：133.05 Kbytes Page：3 Pages

POWER-CHOKE WE-TPC

文件：133.36 Kbytes Page：3 Pages

POWER-CHOKE WE-TPC

文件：133.52 Kbytes Page：3 Pages

POWER-CHOKE WE-TPC

文件：133.23 Kbytes Page：3 Pages

POWER-CHOKE WE-TPC

文件：133.22 Kbytes Page：3 Pages

POWER-CHOKE WE-TPC

文件：132.81 Kbytes Page：3 Pages

EDGE CARD IDC TYPE WITH MOUNTING EAR

TTL HD74/HD74S Series

40 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

SINGLE-PHASE BRIDGE RECTIFIER

40A Single-Phase Bridge Rectifier

DUAL 4-INPUT POSITIVE-NAND BUFFERS

DUAL 4-INPUT POSITIVE-NAND BUFFERS