LVCMOS / LVTTL-TO-DIFFERENTIAL 2.5V / 3.3V LVPECL TRANSLATOR

GENERAL DESCRIPTION\nThe ICS85320I is a LVCMOS / LVTTL-to-Differential 2.5V / 3.3V LVPECL translator and a member of the HiPerClocks™family of High Performance Clocks Solutions from ICS. The ICS85320I has a single ended clock input. The single ended clock input accepts LVCMOS or LVTTL input levels a • 1 differential 2.5V/3.3V LVPECL output\n• LVCMOS/LVTTL CLK input\n• CLK accepts the following input levels:\n   LVCMOS or LVTTL\n• Maximum output frequency: 267MHz\n• Part-to-part skew: 275ps (maximum)\n• Additive phase jitter, RMS: 0.05ps (typical)\n• 3.3V operating supply voltage\n   (operating ;

包装：带 描述：CBI 3MM 1 POSITION RIGHT ANGLE 光电器件 LED - 电路板指示器，阵列，发光条，条形图

包装：散装 描述：LED RED/GREEN RT ANGLE PC MNT 光电器件 LED - 电路板指示器，阵列，发光条，条形图

2.7 V to 5.5 V, 140 uA, Rail-to-Rail Output 12-Bit DAC in a SOT-23

GENERAL DESCRIPTION The AD5320 1 is a single, 12-bit buffered voltage out digital-to-analog converter (DAC) that operates from a single 2.7 V to 5.5 V supply consuming 115 μA at 3 V. Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The AD5320 utilizes a vers

2.5 V to 5.5 V, 500 uA, Parallel Interface Quad Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5334/AD5335/AD5336/AD5344 are quad 8-, 10-, and 12-bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 500 µA at 3 V, and feature a power-down mode that further reduces the current to 80 nA. These devices incorporate an on-chip output buffer that can drive

2.7 V to 5.5 V, 140 uA, Rail-to-Rail Output 12-Bit DAC in a SOT-23

GENERAL DESCRIPTION The AD5320 1 is a single, 12-bit buffered voltage out digital-to-analog converter (DAC) that operates from a single 2.7 V to 5.5 V supply consuming 115 μA at 3 V. Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The AD5320 utilizes a vers

Power supply PCMCIA / flash memory

Power supply PCMCIA / flash memory The BP5320 is a DC / DC converter for supplying power to PCMCIA flash memory. From a power supply (+5V) for PCMCIA operations, the IC supplies a voltage for programming operations (+12V). Compact and thin surface-mounted package with embossing tape for automatic

Single Phase Bridge Rectifier 4 Amp

Features: ● Ideal for Printed Circuit Board ● Surge Overload Rating: 200A (Peak)