2.7 V to 5.5 V, 140 uA, Rail-to-Rail Output 12-Bit DAC in a SOT-23

GENERAL DESCRIPTION The AD5320 1 is a single, 12-bit buffered voltage out digital-to-analog converter (DAC) that operates from a single 2.7 V to 5.5 V supply consuming 115 μA at 3 V. Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The AD5320 utilizes a vers

2.5 V to 5.5 V, 500 uA, Parallel Interface Quad Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5334/AD5335/AD5336/AD5344 are quad 8-, 10-, and 12-bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 500 µA at 3 V, and feature a power-down mode that further reduces the current to 80 nA. These devices incorporate an on-chip output buffer that can drive

2.5 V to 5.5 V, 500 關A, Quad Voltage Output 8-/10-/12-Bit DACs in 10-Lead Packages

GENERAL DESCRIPTION The AD5304/AD5314/AD53241 are quad 8-, 10-, and 12-bit buffered voltage output DACs in 10-lead MSOP and 10-lead LFCSP packages that operate from a single 2.5 V to 5.5 V supply, consuming 500 μA at 3 V. Their on-chip output amplifiers allow rail-to-rail output swing to be achie

2.5 V to 5.5 V, 230uA, Parallel Interface Dual Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5332/AD5333/AD5342/AD5343 are dual 8-, 10-, and 12-bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 230 µA at 3 V, and feature a power-down pin, PD that further reduces the current to 80 nA. These devices incorporate an on-chip output buffer that can dr

2.5 V to 5.5 V, 115 uA, Parallel Interface Single Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5330/AD5331/AD5340/AD53411 are single 8-/10-/12- bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 115 μA at 3 V and feature a power-down mode that further reduces the current to 80 nA. The devices incorporate an on-chip output buffer that can drive the

2.7 V至5.5 V、140 µA、轨到轨电压输出、12位DAC，采用SOT-23和MicroSOIC封装

AD5320是一款单通道、12位缓冲电压输出DAC，采用+2.7 V至+5.5 V单电源供电，3 V时功耗为115 µA。它内置片内精密输出放大器，能够实现轨到轨输出摆幅。AD5320采用多功能三线式串行接口，能够以最高30 MHz的时钟速率工作，并与标准SPI™、QSPI™、MICROWIRE™、DSP接口标准兼容。\n\n 产品特色提供6引脚SOT-23和8引脚MicroSOIC封装低功耗，采用2.7 V至5.5 V单电源供电3 V时功耗为0.35 mW，5 V时功耗为0.7 mW轨到轨输出，压摆率为1 V/µs基准电压从电源获得高速串行接口，时钟速率最高达30 MHz与AD53 • 微功耗：140 µA (5 V)，115 µA (3 V)\n\n• 关断模式的功耗：200 nA (5 V)，50 nA (3 V) \n\n• 通过设计保证单调性\n\n• 上电复位至0 V\n\n• 三种关断功能;

2.5 V to 5.5 V, 500 uA, 2-Wire Interface Quad Voltage Output, 8-/10-/12-Bit DACs

文件：427.29 Kbytes Page：20 Pages

2.5 V to 5.5 V, 500 關A, 2-Wire Interface Interface

文件：565.67 Kbytes Page：24 Pages

2.5 V to 5.5 V, Parallel Interface Octal Voltage Output 8-/10-/12-Bit DACs

文件：476.13 Kbytes Page：24 Pages

2.7 V to 5.5 V, 140 uA, Rail-to-Rail Output 12-Bit DAC in a SOT-23

GENERAL DESCRIPTION The AD5320 1 is a single, 12-bit buffered voltage out digital-to-analog converter (DAC) that operates from a single 2.7 V to 5.5 V supply consuming 115 μA at 3 V. Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The AD5320 utilizes a vers

2.7 V to 5.5 V, 140 uA, Rail-to-Rail Output 12-Bit DAC in a SOT-23

GENERAL DESCRIPTION The AD5320 1 is a single, 12-bit buffered voltage out digital-to-analog converter (DAC) that operates from a single 2.7 V to 5.5 V supply consuming 115 μA at 3 V. Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The AD5320 utilizes a vers

2.7 V to 5.5 V, 140 關A, Rail-to-Rail Output 12-Bit DAC in an SOT-23

文件：410.54 Kbytes Page：20 Pages

2.7 V to 5.5 V, 140 A, Rail-to-Rail Output 12-Bit DAC in an SOT-23

文件：410.54 Kbytes Page：20 Pages

2.7 V to 5.5 V, 140 關A, Rail-to-Rail Output 12-Bit DAC in an SOT-23

文件：410.54 Kbytes Page：20 Pages

2.7 V to 5.5 V, 140 關A, Rail-to-Rail Output 12-Bit DAC in an SOT-23

文件：410.54 Kbytes Page：20 Pages

封装/外壳：8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 包装：管件 描述：IC DAC 12BIT V-OUT 8MSOP 集成电路（IC） 数模转换器（DAC）

封装/外壳：8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 包装：管件 描述：IC DAC 12BIT V-OUT 8MSOP 集成电路（IC） 数模转换器（DAC）

2.7 V to 5.5 V, 140 關A, Rail-to-Rail Output 12-Bit DAC in an SOT-23

文件：410.54 Kbytes Page：20 Pages

2.7 V to 5.5 V, 140 關A, Rail-to-Rail Output 12-Bit DAC in an SOT-23

文件：410.54 Kbytes Page：20 Pages

2.7 V to 5.5 V, 140 關A, Rail-to-Rail Output 12-Bit DAC in an SOT-23

文件：410.54 Kbytes Page：20 Pages

2.7 V to 5.5 V, 140 關A, Rail-to-Rail Output 12-Bit DAC in an SOT-23

文件：410.54 Kbytes Page：20 Pages

2.7 V to 5.5 V, 140 關A, Rail-to-Rail Output 12-Bit DAC in an SOT-23

文件：410.54 Kbytes Page：20 Pages

2.7 V to 5.5 V, 140 關A, Rail-to-Rail Output 12-Bit DAC in an SOT-23

文件：410.54 Kbytes Page：20 Pages

2.7 V to 5.5 V, 140 關A, Rail-to-Rail Output 12-Bit DAC in an SOT-23

文件：410.54 Kbytes Page：20 Pages

2.7 V to 5.5 V, 140 關A, Rail-to-Rail Output 12-Bit DAC in an SOT-23

文件：410.54 Kbytes Page：20 Pages

2.7 V to 5.5 V, 140 關A, Rail-to-Rail Output 12-Bit DAC in an SOT-23

文件：410.54 Kbytes Page：20 Pages

2.7 V to 5.5 V, 140 關A, Rail-to-Rail Output 12-Bit DAC in an SOT-23

文件：410.54 Kbytes Page：20 Pages

Power supply PCMCIA / flash memory

Power supply PCMCIA / flash memory The BP5320 is a DC / DC converter for supplying power to PCMCIA flash memory. From a power supply (+5V) for PCMCIA operations, the IC supplies a voltage for programming operations (+12V). Compact and thin surface-mounted package with embossing tape for automatic

Single Phase Bridge Rectifier 4 Amp

Features: ● Ideal for Printed Circuit Board ● Surge Overload Rating: 200A (Peak)