2 Mbit 256Kb x8 or 128Kb x16, Boot Block Single Supply Flash Memory

Description The M29F200B is a 2 Mbit (256Kb x8 or 128Kb x16) non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single 5V supply. On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM. The M2

2 Megabit (256 K x 8-Bit/128 K x 16-Bit) CMOS 5.0 Volt-only, Boot Sector Flash Memory

文件：810.07 Kbytes Page：41 Pages

2 Mbit 256Kb x8 or 128Kb x16, Boot Block Single Supply Flash Memory

Description The M29F200B is a 2 Mbit (256Kb x8 or 128Kb x16) non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single 5V supply. On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM. The M2

2 Mbit 256Kb x8 or 128Kb x16, Boot Block Single Supply Flash Memory

DESCRIPTION The M29F200 is a non-volatile memory that may be erased electrically at the block or chip level and programmedin-system ona Byte-by-Byteor Word by-Word basis using only a single 5V VCC supply. For Program and Erase operations the necessary high voltages are generated internally. The d

2 Mbit 256Kb x8 or 128Kb x16, Boot Block Single Supply Flash Memory

DESCRIPTION The M29F200 is a non-volatile memory that may be erased electrically at the block or chip level and programmedin-system ona Byte-by-Byteor Word by-Word basis using only a single 5V VCC supply. For Program and Erase operations the necessary high voltages are generated internally. The d

2 Mbit 256Kb x8 or 128Kb x16, Boot Block Single Supply Flash Memory

Description The M29F200B is a 2 Mbit (256Kb x8 or 128Kb x16) non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single 5V supply. On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM. The M2

2 Mbit 256Kb x8 or 128Kb x16, Boot Block Single Supply Flash Memory

Description The M29F200B is a 2 Mbit (256Kb x8 or 128Kb x16) non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single 5V supply. On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM. The M2