HIGH SIDE DRIVER

DESCRIPTION The VN820, VN820SP, VN820-B5, VN820SO, VN820PT are monolithic devices made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. ■ CMOS COMPATIBLE INPUT ■ ON STATE OPEN LOAD DETECTION ■ OFF STATE OPEN LOAD DETE

High-side driver

DESCRIPTION The VN820, VN820SP, VN820-B5, VN820SO, VN820PT are monolithic devices made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. ■ CMOS COMPATIBLE INPUT ■ ON STATE OPEN LOAD DETECTION ■ OFF STATE OPEN LOAD DETE

High-side driver

Features ■ Very low standby current ■ CMOS compatible input ■ On-state open-load detection ■ Off-state open-load detection ■ Thermal shutdown protection and diagnosis ■ Undervoltage shutdown ■ Overvoltage clamp ■ Output stuck to VCC detection ■ Load current limitation ■ Reverse battery p

HIGH SIDE DRIVER

封装/外壳：Pentawatt-5（垂直，弯曲和错列引线） 包装：管件 描述：IC PWR DRVR N-CH 1:1 5PENTAWATT 集成电路（IC） 配电开关，负载驱动器

HIGH SIDE DRIVER

文件：543.49 Kbytes Page：35 Pages

High-side driver

Features ■ Very low standby current ■ CMOS compatible input ■ On-state open-load detection ■ Off-state open-load detection ■ Thermal shutdown protection and diagnosis ■ Undervoltage shutdown ■ Overvoltage clamp ■ Output stuck to VCC detection ■ Load current limitation ■ Reverse battery p

High-side driver

Description The VN820-E is a monolithic device designed in STMicroelectronics VIPower® M0-3 technology. The VN820-E is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Features ■ ECOPACK®: le

High-side driver

Description The VN820-E is a monolithic device designed in STMicroelectronics VIPower® M0-3 technology. The VN820-E is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Features ■ ECOPACK®: le

High-side driver

Features ■ Very low standby current ■ CMOS compatible input ■ On-state open-load detection ■ Off-state open-load detection ■ Thermal shutdown protection and diagnosis ■ Undervoltage shutdown ■ Overvoltage clamp ■ Output stuck to VCC detection ■ Load current limitation ■ Reverse battery p

High-side driver

DESCRIPTION The VN820, VN820SP, VN820-B5, VN820SO, VN820PT are monolithic devices made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. ■ CMOS COMPATIBLE INPUT ■ ON STATE OPEN LOAD DETECTION ■ OFF STATE OPEN LOAD DETE

HIGH SIDE DRIVER

DESCRIPTION The VN820, VN820SP, VN820-B5, VN820SO, VN820PT are monolithic devices made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. ■ CMOS COMPATIBLE INPUT ■ ON STATE OPEN LOAD DETECTION ■ OFF STATE OPEN LOAD DETE

for car body applications

Description The L5958 includes 6 linear voltage regulators and a 2 A power switch, working down to 4.5 V battery level. All the voltage regulators can be switched off through the three enable pins. Features ■ L5958 six outputs: – 8.5 V @ 200 mA – 5.0 V @ 300 mA – 3.3 V @ 250 mA

HIGH SIDE DRIVER

DESCRIPTION The VN820, VN820SP, VN820-B5, VN820SO, VN820PT are monolithic devices made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. ■ CMOS COMPATIBLE INPUT ■ ON STATE OPEN LOAD DETECTION ■ OFF STATE OPEN LOAD DETE

HIGH SIDE DRIVER

Description The VN820-E is a monolithic device designed in STMicroelectronics VIPower® M0-3 technology. The VN820-E is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Features ■ ECOPACK®: le

High-side driver

Description The VN820-E is a monolithic device designed in STMicroelectronics VIPower® M0-3 technology. The VN820-E is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Features ■ ECOPACK®: le

High-side driver

Description The VN820-E is a monolithic device designed in STMicroelectronics VIPower® M0-3 technology. The VN820-E is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Features ■ ECOPACK®: le

High-side driver

Description The VN820-E is a monolithic device designed in STMicroelectronics VIPower® M0-3 technology. The VN820-E is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Features ■ ECOPACK®: le

高侧驱动器

The VN820-E is a monolithic device designed in STMicroelectronic's VIPower®M0-3 technology. The VN820-E is intended for driving any type of load with one side connected to ground. The active VCCpin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table • ECOPACK®: lead free and RoHS compliant \n• Automotive Grade: compliance with AEC guidelines \n• Very low stadby current \n• CMOS compatible input \n• On-state open-load detection \n• Off-state open-load detection \n• Thermal shutdown protection and diagnosis• Undervoltage shutdown \n• Overvoltage ;

HIGH SIDE DRIVER

Description The VN820-E is a monolithic device designed in STMicroelectronics VIPower® M0-3 technology. The VN820-E is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Features ■ ECOPACK®: le

HIGH SIDE DRIVER

DESCRIPTION The VN820, VN820SP, VN820-B5, VN820SO, VN820PT are monolithic devices made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. ■ CMOS COMPATIBLE INPUT ■ ON STATE OPEN LOAD DETECTION ■ OFF STATE OPEN LOAD DETE

High-side driver

DESCRIPTION The VN820, VN820SP, VN820-B5, VN820SO, VN820PT are monolithic devices made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. ■ CMOS COMPATIBLE INPUT ■ ON STATE OPEN LOAD DETECTION ■ OFF STATE OPEN LOAD DETE

High-side driver

Features ■ Very low standby current ■ CMOS compatible input ■ On-state open-load detection ■ Off-state open-load detection ■ Thermal shutdown protection and diagnosis ■ Undervoltage shutdown ■ Overvoltage clamp ■ Output stuck to VCC detection ■ Load current limitation ■ Reverse battery p

for car body applications

Description The L5958 includes 6 linear voltage regulators and a 2 A power switch, working down to 4.5 V battery level. All the voltage regulators can be switched off through the three enable pins. Features ■ L5958 six outputs: – 8.5 V @ 200 mA – 5.0 V @ 300 mA – 3.3 V @ 250 mA

HIGH SIDE DRIVER

DESCRIPTION The VN820, VN820SP, VN820-B5, VN820SO, VN820PT are monolithic devices made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. ■ CMOS COMPATIBLE INPUT ■ ON STATE OPEN LOAD DETECTION ■ OFF STATE OPEN LOAD DETE

HIGH SIDE DRIVER

Description The VN820-E is a monolithic device designed in STMicroelectronics VIPower® M0-3 technology. The VN820-E is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Features ■ ECOPACK®: le

High-side driver

Description The VN820-E is a monolithic device designed in STMicroelectronics VIPower® M0-3 technology. The VN820-E is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Features ■ ECOPACK®: le

High-side driver

Description The VN820-E is a monolithic device designed in STMicroelectronics VIPower® M0-3 technology. The VN820-E is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Features ■ ECOPACK®: le

HIGH SIDE DRIVER

DESCRIPTION The VN820, VN820SP, VN820-B5, VN820SO, VN820PT are monolithic devices made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. ■ CMOS COMPATIBLE INPUT ■ ON STATE OPEN LOAD DETECTION ■ OFF STATE OPEN LOAD DETE

HIGH SIDE DRIVER

DESCRIPTION The VN820, VN820SP, VN820-B5, VN820SO, VN820PT are monolithic devices made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. ■ CMOS COMPATIBLE INPUT ■ ON STATE OPEN LOAD DETECTION ■ OFF STATE OPEN LOAD DETE

HIGH SIDE DRIVER

Description The VN820-E is a monolithic device designed in STMicroelectronics VIPower® M0-3 technology. The VN820-E is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Features ■ ECOPACK®: le

HIGH SIDE DRIVER

DESCRIPTION The VN820, VN820SP, VN820-B5, VN820SO, VN820PT are monolithic devices made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. ■ CMOS COMPATIBLE INPUT ■ ON STATE OPEN LOAD DETECTION ■ OFF STATE OPEN LOAD DETE

High-side driver

DESCRIPTION The VN820, VN820SP, VN820-B5, VN820SO, VN820PT are monolithic devices made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. ■ CMOS COMPATIBLE INPUT ■ ON STATE OPEN LOAD DETECTION ■ OFF STATE OPEN LOAD DETE

High-side driver

Features ■ Very low standby current ■ CMOS compatible input ■ On-state open-load detection ■ Off-state open-load detection ■ Thermal shutdown protection and diagnosis ■ Undervoltage shutdown ■ Overvoltage clamp ■ Output stuck to VCC detection ■ Load current limitation ■ Reverse battery p

for car body applications

Description The L5958 includes 6 linear voltage regulators and a 2 A power switch, working down to 4.5 V battery level. All the voltage regulators can be switched off through the three enable pins. Features ■ L5958 six outputs: – 8.5 V @ 200 mA – 5.0 V @ 300 mA – 3.3 V @ 250 mA

HIGH SIDE DRIVER

DESCRIPTION The VN820, VN820SP, VN820-B5, VN820SO, VN820PT are monolithic devices made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. ■ CMOS COMPATIBLE INPUT ■ ON STATE OPEN LOAD DETECTION ■ OFF STATE OPEN LOAD DETE

HIGH SIDE DRIVER

Description The VN820-E is a monolithic device designed in STMicroelectronics VIPower® M0-3 technology. The VN820-E is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Features ■ ECOPACK®: le

High-side driver

Description The VN820-E is a monolithic device designed in STMicroelectronics VIPower® M0-3 technology. The VN820-E is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Features ■ ECOPACK®: le

High-side driver

Description The VN820-E is a monolithic device designed in STMicroelectronics VIPower® M0-3 technology. The VN820-E is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Features ■ ECOPACK®: le

封装/外壳：Pentawatt-5（直引线，交错配接深度） 包装：管件 描述：IC PWR DRVR N-CH 1:1 5PENTAWATT 集成电路（IC） 配电开关，负载驱动器

HIGH SIDE DRIVER

文件：543.49 Kbytes Page：35 Pages

HIGH SIDE DRIVER

文件：543.49 Kbytes Page：35 Pages

HIGH SIDE DRIVER

文件：543.49 Kbytes Page：35 Pages

IC DRVR HI SIDE 9A AUTO P2PAK

HIGH SIDE DRIVER

文件：543.49 Kbytes Page：35 Pages

HIGH SIDE DRIVER

文件：543.49 Kbytes Page：35 Pages

HIGH SIDE DRIVER

文件：543.49 Kbytes Page：35 Pages

HIGH SIDE DRIVER

文件：543.49 Kbytes Page：35 Pages

HIGH SIDE DRIVER

文件：543.49 Kbytes Page：35 Pages

HIGH SIDE DRIVER

文件：543.49 Kbytes Page：35 Pages

N-CHANNEL Enhancement-Mode Silicon Gate TMOS

Power Field Effect Transistor N-Channel Enhancement-Mode Silicon Gate TMOS TMOS POWER FETs 2 and 2.5 AMPERES rDS(on) = 3 OHM 450 and 500 VOLTS rDS(on) = 4 OHM 450 VOLTS

8/16-bit Data Bus Flash Memory Card

DESCRIPTION The MF8XXX-GMCAVXX is a flash memory card which uses eight-megabit or sixteen megabit flash electrically erasable and programmable read only memory IC’s as common memory and a 64-kilobit electrically erasable and programmable read only memory as attribute memory. The MF8XXX-GNCAVXX i

JFET RF AMPLIFIER

JFET RF AMPLIFIER N-CHANNEL - DEPLETION

ULTRAFAST RECTIFIERS 8 AMPERES 200-400-600 VOLTS

. . . designed for use in switching power supplies, inverters and as free wheeling diodes, these state–of–the–art devices have the following features: • Ultrafast 25, 50 and 75 Nanosecond Recovery Time • 175°C Operating Junction Temperature • Popular TO–220 Package • Epoxy Meets U

ULTRAFAST RECTIFIER 8 AMPERES 200 VOLTS

SWITCHMODE Power Rectifier Designed for use in switching power supplies, inverters and as free wheeling diodes, these state–of–the–art devices have the following features: • Ultrafast 35 ns Recovery Times • 150°C Operating Junction Temperature • Epoxy Meets UL94, VO @ 1/8″ • High Temperature