POWER ZENERS

DESCRIPTION Fused-in-glass, metallurgically-bonded 5 watt zeners. FEATURES • 2 Times Greater Surge Rating than Conventional 10 Watt Zeners • Small Physical Size

Electrical Specifications at 25oC

Zener Diodes Electrical Specifications at 25°C

POWER ZENERS

DESCRIPTION Fused-in-glass, metallurgically-bonded 5 watt zeners. FEATURES • 2 Times Greater Surge Rating than Conventional 10 Watt Zeners • Small Physical Size

POWER ZENERS 5 WATT

POWER ZENERS 5 WATT Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.

5W 70V 10% Zener Diode

This Zener Diode is packaged in DIGI B, which has a power dissipation of 5W.\n\n Available as High Reliability device per MIL-PRF-19500 indicate –HR suffix after the part number. Contact for -HR flow. Add \"PBF\" suffix for Pb-free lead finish.

封装/外壳：B，轴向 包装：散装 描述：VOLTAGE REGULATOR 分立半导体产品 二极管 - 齐纳 - 单

Wide bandwidth analog switch IC

■ Overview The AN5870K is a wide bandwidth analog switch IC of 300 MHz operation. It is usable for RGB signal and horizontal/vertical synchronizing signals, and it has a built-in 75 Ω driver for video signal. In addition, it has also realized a high speed operation by the adoption of CMOS process

Wide bandwidth analog switch IC

■ Overview The AN5870K is a wide bandwidth analog switch IC of 300 MHz operation. It is usable for RGB signal and horizontal/vertical synchronizing signals, and it has a built-in 75 Ω driver for video signal. In addition, it has also realized a high speed operation by the adoption of CMOS process

Silicon Power Rectifier Diode, 12 Amp

Description: The NTE5810, NTE5811, and NTE5870 through NTE5891 are low power general purpose rectifier diodes in a DO4 type package designed for battery chargers, converters, power supplies, and machine tool controls. Features: • High Surge Current Capability • High Voltage Available

Photo Transistor

Features • Lensed for high sensitivity • φ5mm(T-13/4) all plastic mold type • High reliability and stable characteristics • Visible light cut-off type • With base terminal