MOS INTEGRATED CIRCUIT

FEATURES • Single-chip CMOS monolithic LSI • ITU-T Recommendation G.711/G.714 compliant • Four-channel PCM CODECs integrated on a single chip • Compatible with A-law and m-law • Digital gain setting for each channel • Transmit : +7.5 to –8.0 dB (0.5 dB step) • Receive : 0 to –15.5 dB (0.5 d

FOUR-CHANNEL PCM CODEC

文件：161.86 Kbytes Page：28 Pages

FOUR-CHANNEL PCM CODEC

MOS INTEGRATED CIRCUIT

FEATURES • Single-chip CMOS monolithic LSI • ITU-T Recommendation G.711/G.714 compliant • Four-channel PCM CODECs integrated on a single chip • Compatible with A-law and m-law • Digital gain setting for each channel • Transmit : +7.5 to –8.0 dB (0.5 dB step) • Receive : 0 to –15.5 dB (0.5 d

FOUR-CHANNEL PCM CODEC

文件：161.86 Kbytes Page：28 Pages

PWM POWER MOS CONTROLLER

DESCRIPTION The L9610C/11C is a monolithic integrated circuit working in PWM mode as controller of an external powerMOS transistor in High Side Driver configuration. Features of the device include controlled slope of the leading and trailing edge of the gate driving voltage,linear current limiti

PWM POWER MOS CONTROLLER

DESCRIPTION The L9610C/11C is a monolithic integrated circuit working in PWM mode as controller of an external powerMOS transistor in High Side Driver configuration. Features of the device include controlled slope of the leading and trailing edge of the gate driving voltage,linear current limiti

HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER

DESCRIPTION The PS9611 and PS9611L are optically coupled high-speed, totem-pole output isolators containing a GaAlAs LED on light emitting diode (input side) and a photodiode and a signal processing circuit on light receiving side (output side) on one chip. The PS9611 is in a plastic DIP (Dual I

HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER

DESCRIPTION The PS9611 and PS9611L are optically coupled high-speed, totem-pole output isolators containing a GaAlAs LED on light emitting diode (input side) and a photodiode and a signal processing circuit on light receiving side (output side) on one chip. The PS9611 is in a plastic DIP (Dual I