REFERENCE FREQUENCY 16.368 MHz, 2ND IF FREQUENCY 4.092 MHz RF/IF FREQUENCY DOWN-CONVERTER PLL FREQUENCY SYNTHESIZER IC FOR GPS RECEIVER

DESCRIPTION The µPB1005K is a silicon monolithic integrated circuit for GPS receiver. This IC is designed as double conversion RF block integrated RF/IF down-converter + PLL frequency synthesizer on 1 chip. The µPB1005K features 36-pin plastic QFN, fixed prescaler and supply voltage. The

REFERENCE FREQUENCY 16.368 MHz, 2ND IF FREQUENCY 4.092 MHz RF/IF FREQUENCY DOWN-CONVERTER PLL FREQUENCY SYNTHESIZER IC FOR GPS RECEIVER

DESCRIPTION The µPB1005GS is a silicon monolithic integrated circuit for GPS receiver. This IC is designed as double conversion RF block integrated RF/IF down-converter + PLL frequency synthesizer on 1 chip. The µPB1005GS features shrink package, fixed prescaler and supply voltage. The 30

3V, 400 MHz SILICON MMIC FREQUENCY CONVERTER

DESCRIPTION AND APPLICATIONS The UPC2753GR is a frequency converter manufactured with the NESAT III process. This product consists of an RF input amplifier, Gilbert cell mixer, LO input buffer, IF amplifier with AGC, external filter port, and IF output limiting amplifier. This device was specific

BIPOLAR ANALOG INTEGRATED CIRCUIT

FEATURES • Low power operation: power supply VCC = 3.0 V typ. • Low power consumption: ICCTOTAL = 6.5 mA typ. • High gain of 79 dB in total: 38 dB typ. in down-converter block (VGC £ 12 V), and 41 dB typ. in 2nd IF amplifier block • GC function: GC dynamic range (DGC) = 19 dB typ. • Availabl

3V, 400 MHz SILICON MMIC FREQUENCY CONVERTER

BIPOLAR ANALOG INTEGRATED CIRCUIT

FEATURES • Low power operation: power supply VCC = 3.0 V typ. • Low power consumption: ICCTOTAL = 6.5 mA typ. • High gain of 79 dB in total: 38 dB typ. in down-converter block (VGC £ 12 V), and 41 dB typ. in 2nd IF amplifier block • GC function: GC dynamic range (DGC) = 19 dB typ. • Availabl

3V, 400 MHz SILICON MMIC FREQUENCY CONVERTER

DESCRIPTION AND APPLICATIONS The UPC2753GR is a frequency converter manufactured with the NESAT III process. This product consists of an RF input amplifier, Gilbert cell mixer, LO input buffer, IF amplifier with AGC, external filter port, and IF output limiting amplifier. This device was specific

BIPOLAR ANALOG INTEGRATED CIRCUIT

FEATURES • Low power operation: power supply VCC = 3.0 V typ. • Low power consumption: ICCTOTAL = 6.5 mA typ. • High gain of 79 dB in total: 38 dB typ. in down-converter block (VGC £ 12 V), and 41 dB typ. in 2nd IF amplifier block • GC function: GC dynamic range (DGC) = 19 dB typ. • Availabl

Low Voltage, 0.7 Ω, Triple SPDT Analog Switch

DESCRIPTION The DG2753 is a low voltage, low on-resistance, triple single-pole/double-throw (SPDT) monolithic CMOS analog switch. The device is designed for operation from 1.65 V to 4.3 V single supply. The device is 1.8 V logic compatible within the full operation voltage range to interface with

KR Electronics part number 2753 is a 157.5 MHz elliptic type bandpass filter

文件：36.91 Kbytes Page：2 Pages

Dome Plugs

文件：105.62 Kbytes Page：1 Pages

6 W single-output VIPer17 demonstration board

文件：1.42937 Mbytes Page：31 Pages

Metallized Polypropylene Film Capacitor

文件：92.52 Kbytes Page：4 Pages