P-CHANNEL MOS FIELD EFFECT TRANSISTOR FOR SWITCHING

DESCRIPTION The µPA651TT is a switching device, which can be driven directly by a 1.8 V power source. This device features a low on-state resistance and excellent switching characteristics, and is suitable for applications such as power switch of portable machine and so on. FEATURES • 1.8 V dr

P-Channel 20 V (D-S) MOSFET

FEATURES • Halogen-free According to IEC 61249-2-21 Definition • TrenchFET® Power MOSFET • 100 Rg Tested • Compliant to RoHS Directive 2002/95/EC APPLICATIONS • Load Switch for Portable Devices - Cellular Phone - DSC - Portable Game Console - MP3 - GPS

MOS FIELD EFFECT TRANSISTOR

P-CHANNEL MOS FIELD EFFECT TRANSISTOR FOR SWITCHING FEATURES • 1.8 V drive available • Low on-state resistance RDS(on)1 = 69 mΩ MAX. (VGS = −4.5 V, ID = −2.5 A) RDS(on)2 = 88 mΩ MAX. (VGS = −2.5 V, ID = −2.5 A) RDS(on)3 = 142 mΩ MAX. (VGS = −1.8 V, ID = −1.5 A)

P-CHANNEL MOS FIELD EFFECT TRANSISTOR FOR SWITCHING

NPN SILICON POWER DARLINGTONS

PNP SILICON POWER DARLINGTONS ● Designed for Complementary Use with BD645, BD647, BD649 and BD651 ● 62.5 W at 25°C Case Temperature ● 8 A Continuous Collector Current ● Minimum hFE of 750 at 3 V , 3 A

STEP-UP VOLTAGE CONVERTER WITH VOLTAGE MONITOR

DESCRIPTION The TK651xx low power step-up DC-DC converter is designed for portable battery powered systems, capable of operating from a single battery cell down to 0.9 V. The TK651xx provides the power switch and the control circuit for a boost converter. The converter takes a DC input and boosts

DIGITAL LOGIC GROUND ISOLATION LINE RECEIVER

Digital Logic Ground Isolation Line Receiver Microprocessor System Interfaces Switching Power Supply Feedback Control Analog Signal Isolation The TOSHIBA TLP651 consists of a GaAℓAs high−output light emitting diode and a high speed detector of one chip photo diode−transistor. This unit is 8

DUAL NPN MEDIUM POWER TRANSISTORS

SM-8 DUAL NPN MEDIUM POWER TRANSISTORS

NPN SILICON PLANAR MEDIUM POWER TRANSISTORS

FEATURES * 60 Volt VCEO * 2 Amp continuous current * Low saturation voltage * Ptot=1 Watt