12V MOSFET Drivers with Output Disable for Single Phase Synchronous-Rectified Buck Converter

Description The uP6281 is a dual, high voltage MOSFET driver optimized for driving two N-Channel MOSFETs in a synchronousrectified buck converter. Each driver is capable of driving a 5000pF load with 30ns transition time. This device combined with uPI multi-phase buck PWM controller forms a c

12V MOSFET Drivers with Output Disable for Single Phase Synchronous-Rectified Buck Converter

Description The uP6281 is a dual, high voltage MOSFET driver optimized for driving two N-Channel MOSFETs in a synchronousrectified buck converter. Each driver is capable of driving a 5000pF load with 30ns transition time. This device combined with uPI multi-phase buck PWM controller forms a c

12V MOSFET Drivers with Output Disable for Single Phase Synchronous-Rectified Buck Converter

Description The uP6281 is a dual, high voltage MOSFET driver optimized for driving two N-Channel MOSFETs in a synchronousrectified buck converter. Each driver is capable of driving a 5000pF load with 30ns transition time. This device combined with uPI multi-phase buck PWM controller forms a c

12V MOSFET Drivers with Output Disable for Single Phase Synchronous-Rectified Buck Converter

Description The uP6281 is a dual, high voltage MOSFET driver optimized for driving two N-Channel MOSFETs in a synchronousrectified buck converter. Each driver is capable of driving a 5000pF load with 30ns transition time. This device combined with uPI multi-phase buck PWM controller forms a c

Inline positive displacement (PD) flowmeter or Inline batch controller

The device Type SE35 + S077 is specially designed for continuous flow measurement of highly viscous fluids like glue, honey or oil. slightly aggressive, solid-free liquids. The device is provided as flowmeter or batch controller. The device is made up of a compact Inline sensor-fitting with ova

Solenoids with Kick and Drop

The Kick and Drop variants of the AC10 and AC19 coil types use two windings in one solenoid. Thanks to an increased inrush power for the first winding, the switchable pressure range is increased as installation volumes stay the same. The second winding is switched in series after 500 ms. Thanks

Flow rate controller for gases

The flow rate controller type 8750 represents a closed flow control loop to measure and control gases using the differential pressure principle. The reliable and robust system consists of an ELEMENT control valve, type 2301, the compact process controller type 8693 put on top of the valve and t

1Pr 22AWG Shielded Data 16/2 Power OSDP CMP

Product Description OSDP Reader Cable, 1 Pair 22 AWG stranded (7x30) tinned copper (data) with foam FEP insulation, Beldfoil® shield w/ drain, 2 Conductor 16 AWG stranded (19x29) Bare copper conductor (power) with Flamarrest® insulation, Plenum, Flamarrest®

3-Channel Constant Current LED Driver with Programmable PWM Control

Features and Benefits ▪ 3 × 10-bit PWM brightness settings ▪ 3 × 7-bit dot correction current settings ▪ 5 to 17 V operation ▪ Wide output current range, 10 to 150 mA per channel ▪ Internally generated PWM clock ▪ Serial port operates at up to 5 MHz ▪ Data and clock logic architecture allow