Applications

• Programmable Logic Controllers (PLCs)

• Battery Management System (BMS)

• Industrial Inverters

General

The TLP2710 is a 5-Mbps low-power photocoupler in the small SO6L package. It is housed in a thin SO6L package

of 2.3 mm (max). The TLP2710 has guaranteed the isolation voltage 5 kVrms and compliant with international

safety standards for reinforced insulation. The TLP2710 consumes supply current (IDDL/IDDH) of only 0.3 mA

maximum over the entire operating temperature range of -40 to 125  and operates at a supply voltage as low

as 2.7 V, contributing to a reduction in power consumption of various systems. The input forward current can be

less than 1 mA maximum, allowing direct drive by a microcontroller. The detector has a totem-pole output stage

with current sourcing and sinking capabilities. The TLP2710 has an internal Faraday shield that provides a

guaranteed common-mode transient immunity of ±25 kV/μs.

Features

(1) Package: SO6L

(2) Data transfer rate: 5 MBd (typ.) (NRZ)

(3) Supply current: 0.3 mA (max)

(4) Threshold input current: 1.0 mA (max)

(5) Supply voltage: 2.7 V to 5.5 V

(6) Operating temperature: -40 to 125 

(7) Propagation delay time: 250 ns (max)

(8) Pulse width distortion: 30 ns (max)

(9) Isolation voltage: 5000 Vrms (min)

(10) Safety standards

UL-approved: UL1577, File No.E67349

cUL-approved: CSA Component Acceptance Service No.5A File No.E67349

VDE-approved: EN60747-5-5, EN60065, EN60950-1, EN 62368-1 (Note 1)