The TC74VHCT9125A/9126A are an ultra-high-speed 5-bit Schmitt buffer

fabricated using silicon-gate CMOS technology.

The TC74VHCT9125A/9126A combines low power consumption of CMOS

with Schottky TTL speeds.

The input voltage are compatible with TTL output voltage.

This device may be used as a level converter for interfacing 3.3 V to 5 V

system.

Y1 to Y4 outputs can be put in the high-impedance state by placing a logic

HIGH on the Enable ( G ) input. The CONT input determines the logical

inversion of data.A logic LOW on the CONT input configures the

TC74VHC9125A/9126A as an inverter; a logic HIGH on the CONT input

configures the TC74VHCT9125A/9126A as a buffer.

TC74VHCT9125A Y5 output is an inverting type, and the TC74VHCT9126A Y5 output is a non-inverting type.

All the inputs have hysteresis between the positive-going and negative-going thresholds. Thus the TC74VHC9125A/9126A are

capable of squaring up transitions of slowly changing input signals and provides an improved noise immunity.

Input protection and output circuit ensure that 0 to 5.5 V can be applied to the input and output (Note) pins without regard to the

supply voltage. These structure prevents device destruction due to mismatched supply and input/output voltages such as battery

back up, etc.

Note: Output in off-state

Features

 High speed: tpd = 6.6 ns (typ.) (VCC = 5 V)

 Low supply current: ICC = 2 μA (max) (Ta = 25°C)

 Compatible with TTL inputs

VIL = 0.5 V (max)

VIH = 2.1 V (min)

 Power down protection is provided on all inputs.

 Balanced propagation delays: tpLH ∼− tpHL

 Input terminals are at the opposite side of Output terminals