1 Features

• Qualified for Automotive Applications

• AEC-Q100 Qualified

– Device Temperature Grade 1

• Typical 3A sink 3A source output currents

• 500mV over-current protection (OCP) threshold

• Single pin for fault output and enable

• Programmable fault clear time and over current

detection response time

• Absolute maximum VDD voltage: 30V

• Tight UVLO threshold for bias flexibility

• Typical 26ns propagation delay

• Self-protect driver with thermal shutdown function

at 180°C

• Available in 5mm x 4mm SOIC-8 package

• Operating junction temperature range of –40°C to

150°C

2 Applications

• Digital controlled PFC

• Air conditioner

• Home Appliances

• Motor drives

• General purpose low-side gate drover fpr singleended

topologies

3 Description

The UCC5713x-Q1 is a single channel, highperformance,

low-side gate driver capable of

effectively driving MOSFET, IGBT and SiC power

switches. The UCC5713x-Q1 has a typical peak drive

strength of 3A.

The UCC5713x-Q1 provide the over current

protection with the OCP pin. When the over current

signal detected on the OCP pin, the internal circuit

will pull down the EN/FLT pin to report fault and force

the OUT to low stage. Externall pull up circuir on the

EN/FLT is required during the normal operation of the

driver. Pulling the EN/FLT low will disable the driver.

The EN/FLT would also report the under voltage lock

out (UVLO) fault on VDD and the over temperature

fault. The UCC5713x-Q1 provide both 8V and 12V

UVLO option for SiC and IGBT applications.