1.1 Features

1

• Two 11-Bit 60-MSPS Analog-to-Digital (A/D)

Converters With Analog Preprocessors

(Clamp/AGC)

• Fixed RGB-to-YUV Color Space Conversion

• Robust Sync Detection for Weak and Noisy

Signals as Well as VCR

• Supports NTSC (J, M, 4.43), PAL (B, D, G, H, I,

M, N, Nc, 60) and SECAM (B, D, G, K, K1, L)

CVBS, S-Video

• Supports Component Standards 480i, 576i,

480p, and 576p

• Supports ITU-R BT.601 Pixel Sampling

Frequencies

• Supports 3D Y/C Separation, or 2D 5-Line (5H)

Adaptive Comb and Chroma Trap Filter for

Both PAL and NTSC Signals

• Concurrent Temporal, Frame Recursive, Noise

Reduction (3DNR)

• IF Compensation

• Line-Based Time Base Correction (TBC)

• Fast Switch 4x Oversampled Input for Digital

RGB Overlay Switching Between Any CVBS,

S-Video, or Component Video Input

• SCART 4x Oversampled Fast Switching

Between Component RGB Input and CBVS

Input

• Analog Video Output

• Chrominance Processor

• Luminance Processor

• Clock/Timing Processor and Power-Down

Control

• Output Formatter Supports Both ITU-R BT.656

(Embedded Syncs) and ITU-R BT.601 (4:2:2

With Discrete Syncs)

• I2C Host Port Interface

• VBI Data Processor

• Blue Screen (Programmable Color) Output

• Macrovision™ Copy Protection Detection

Circuit (Types 1, 2, and 3) on Both Interlaced

and Progressive Signals

1.2 Applications

• Digital TV

• LCD TV/Monitors

• DVD-R

• PVR

• PC Video Cards

• Video Capture/Video Editing

• Video Conferencing

1.3 Description

The TVP5160 device is a high quality, digital video decoder that digitizes and decodes all popular

baseband analog video formats into digital component video. The TVP5160 decoder supports the A/D

conversion of component YPbPr and RGB (SCART) signals, as well as the A/D conversion and decoding

of NTSC, PAL, and SECAM composite and S-Video into component YCbCr. Additionally, component

progressive signals can be digitized. The chip includes two 11-bit, 60-MSPS, A/D converters (ADCs). Prior

to each ADC, each analog channel contains an analog circuit, which clamps the input to a reference

voltage and applies a programmable gain and offset. A total of 12 video input terminals can be configured

to a combination of YPbPr, RGB, CVBS, and S-Video video inputs.

Progressive component signals are sampled at 2× clock frequency (54 MHz) and are then decimated to

the 1× rate. In SCART mode the component inputs and the CVBS inputs are sampled at 54 MHz