1 Features

• Low output 1/f noise < 20μVRMS (100Hz to

100kHz)

• Low output voltage ripple < 10μVRMS after ferrite

bead

• High PSRR of > 65dB (up to 100kHz)

• 2.2MHz, 1.4MHz, or 1.0MHz fixed frequency peak

current mode control

• Synchronizable with external clock

• Integrated loop compensation supports ferrite

bead for second stage L-C filter with 30dB

attenuation

• Spread spectrum modulation

• 3.0V to 17V input voltage range

• 0.8V to 5.5V output voltage range

• 25mΩ/7mΩ RDSon

• Output voltage accuracy of ±1% over temperature

• Precise enable input allows

– User-defined undervoltage lockout

– Exact sequencing

• Adjustable soft start

• Power-good output

• Output discharge (optional)

• –40°C to 125°C junction temperature range

• 4.0mm × 4.7mm × 3.0mm QFN

• Create a custom design using the TPSM82916

with the WEBENCH® Power Designer

2 Applications

• Telecom infrastructure

• Test and measurement

• Aerospace and defense (radar, avionics)

• Medical

3 Description

The TPSM82916 is a high-efficiency, low noise,

and low ripple current mode synchronous buck

module. The device is designed for noise sensitive

applications that normally use an LDO for post

regulation such as high-speed ADCs, clock and jitter

cleaner, serializer, deserializer, and radar applications.

To reduce the output voltage ripple, the device

loop compensation is designed to operate with an

optional second-stage ferrite bead L-C filter. Lowfrequency

noise levels, similar to a low-noise LDO,

are further achieved by filtering the internal voltage

reference with a capacitor connected to the NR/SS

pin. Combined, these features allow for an output

voltage ripple below 10μVRMS.

The device operates at a fixed switching frequency of

2.2MHz, 1.4MHz, or 1MHz, and can be synchronized

to an external clock. An optional spread spectrum

modulation scheme spreads the DC/DC switching

frequency over a wider span, which lowers the mixing

spurs.