1 Features

• 3 buck converters at up to 2.3 MHz switching

frequency.

– 1× VIN: 2.5V – 5.5V; IOUT: 3.5A; VOUT 0.6V –

3.4V

– 2× VIN: 2.5 V – 5.5 V; IOUT: 2A; VOUT 0.6V –

3.4V

• 4 linear regulators:

– 2x VIN: 1.5V – 5.5V; IOUT: 400mA; VOUT: 0.6V –

3.4V (configurable as load switch and bypassmode,

supporting SD-card)

– 2x VIN: 2.2V – 5.5V; IOUT: 300mA; VOUT: 1.2V –

3.3V (configurable as load switch)

• Dynamic voltage scaling on all three buck

converters

• Low IQ/PFM, PWM-mode (quasi-fixed frequency)

or fixed frequency mode

• Programmable power sequencing and default

voltages

• I2C interface, supporting standard, fast-mode and

fast-mode+

• Designed to support systems with 14+ rails

(2× TPS65219-Q1 devices in multi-PMIC

configuration)

• 2 GPOs, 1 GPIO, and 3 multi-function-pins

• EEPROM programmability

• Functional safety capable

2 Applications

• Low power automotive MPUs such as AM62x-Q1

and AM64x-Q1

• Head units, Digital Cluster, Telematic Control

Units, Lidar Proc.

• DMS/OMS, eMirror and CMS

• Automotive Lighting

• Automotive Audio Amplifiers

• Powertrain

• ISP and deep learning

3 Description

The TPS65219-Q1 is a Power Management IC

(PMIC) designed to supply a wide range of SoCs in

automotive applications. The device is characterized

across an ambient temperature range of -40°C to

+125°C, making the PMIC an excellent choice for

automotive applications. The device includes three

synchronous stepdown DC-DC converters and four

linear regulators.

The DC-DC converters are capable of 1x 3.5A and 2x

2 A. The converters require a small 470nH inductor,

4.7μF input capacitance, and a minimum 10μF output

capacitance per rail depending on the switching mode

configuration.

Two of the LDOs support output currents of 400mA at

an output voltage range of 0.6V to 3.4V. These LDOs

support bypass mode, acting as a load-switch, and

allow voltage-changes during operation. The other

two LDOs support output currents of 300mA at an

output voltage range of 1.2V to 3.3V. These LDOs

also support load-switch mode.

The I2C-interface, IOs, GPIOs and multi-function-pins

(MFP) allow a seamless interface to a wide range of

SoCs.