1 Features

1• Efficiency > 90% at Nominal Operating Conditions

• Total DC Output Voltage Accuracy 5.0 V±2%

• Typical 30-μA Quiescent Current

• Best in Class Line and Load Transient

• Wide V IN Range From 2.3 V to 5.5 V

• Output Current up to 450 mA

• Automatic PFM/PWM Mode Transition

• Low Ripple Power Save Mode for Improved

Efficiency at Light Loads

• Internal Softstart, 250-μs Typical Start-Up Time

• 3.5-MHz Typical Operating Frequency

• Load Disconnect During Shutdown

• Current Overload and Thermal Shutdown

Protection

• Three Surface-Mount External Components

Required (One MLCC Inductor, Two Ceramic

Capacitors)

• Total Solution Size <13 mm2

• Available in a 6-Pin DSBGA and 2-mm × 2-mm

WSON Package

2 Applications

• USB-OTG Applications

• Portable HDMI Applications

• Cell Phones, Smart Phones

• PDAs, Pocket PCs

• Portable Media Players

• Digital Cameras

3 Description

The TPS6124x device is a highly efficient

synchronous step-up DC-DC converter optimized for products powered by either a three-cell alkaline, NiCd

or NiMH, or one-cell Li-Ion or Li-Polymer battery. The

TPS6124x supports output currents up to 450 mA.

The TPS61240 has an input valley current limit of 500

mA, and the TPS61241 has an input valley current of

600 mA.

With an input voltage range of 2.3 V to 5.5 V, the

device supports batteries with extended voltage

range and are ideal to power portable applications

like mobile phones and other portable equipment.

The TPS6124x boost converter is based on a quasi- constant on-time valley current mode control scheme.

The TPS6124x presents a high impedance at the

VOUT pin when shut down. This allows for use in applications that require the regulated output bus to

be driven by another supply while the TPS6124x is

shut down.

During light loads the device will automatically pulse

skip allowing maximum efficiency at lowest quiescent

currents. In the shutdown mode, the current

consumption is reduced to less than 1 μA.

TPS6124x allows the use of small inductors and

capacitors to achieve a small solution size. During

shutdown, the load is completely disconnected from

the battery. The TPS6124x is available in a 6-pin DSBGA and 2-mm × 2-mm WSON package.