1FEATURES

23• D-CAP2™ Mode Enables Fast Transient

Response

• Low Output Ripple and Allows Ceramic Output

Capacitor

• Wide VIN Input Voltage Range: 4.5 V to 18 V

• Output Voltage Range: 0.76 V to 5.5 V

• Highly Efficient Integrated FET’s Optimized

for Lower Duty Cycle Applications

– 65 mΩ (High Side) and 55 mΩ (Low Side)

• High Efficiency, less than 10 μA at shutdown

• High Initial Bandgap Reference Accuracy

• Adjustable Soft Start

• Pre-Biased Soft Start

• 700-kHz Switching Frequency (f SW)

• Cycle By Cycle Over Current Limit

• Power Good Output

APPLICATIONS

• Wide Range of Applications for Low Voltage

System

– Digital TV Power Supply

– High Definition Blu-ray Disc™ Players

– Networking Home Terminal

– Digital Set Top Box (STB)

DESCRIPTION

The TPS54425 is an adaptive on-time D-CAP2™

mode synchronous buck converter. The TPS54425

enables system designers to complete the suite of

various end equipment’s power bus regulators with a

cost effective, low component count, low standby

current solution. The main control loop for the

TPS54425 uses the D-CAP2™ mode control which

provides a very fast transient response with no

external compensation components. The TPS54425

also has a proprietary circuit that enables the device

to adopt to both low equivalent series resistance

(ESR) output capacitors, such as POSCAP or

SP-CAP, and ultra-low ESR ceramic capacitors. The device operates from 4.5-V to 18-V VIN input. The

output voltage can be programmed between 0.76 V

and 5.5 V. The device also features an adjustable

soft start time and a power good function. The

TPS54425 is available in the 14-pin HTSSOP

package, and designed to operate from –40°C to

85°C.