1FEATURES

2• Wide Input Voltage Range: 3 V to 28 V

• Output Voltage Range: 0.6 V to 2.6 V

• Wide Output Load Range: 0 to 20A+

• Built-in 0.5% 0.6 V Reference

• D-CAP™ Mode with 100-ns Load Step

Response

• Adaptive On Time Control Architecture with

Fixed 340kHz Operation

• Dynamic Output Voltage Change Capability

• 4700 ppm/°C RDS(on) Current Sensing

• Internal 0.9-ms Voltage Servo Softstart

• Pre-Charged Start-up Capability

• Built-in Output Discharge

• Power Good Output

• Integrated Boost Switch

• Built-in OVP/UVP/OCP

• Thermal Shutdown (Non-latch)

• SON-10 (DSC) Package

APPLICATIONS

• Notebook Computers

• I/O Supplies

• System Power Supplies

DESCRIPTION

The TPS51217 is a small-sized single buck controller

with adaptive on-time D-CAP™ mode. The device is

suitable for low output voltage, high current, PC

system power rail and similar point-of-load (POL)

power supply in digital consumer products. A small

package with minimal pin-count saves space on the PCB, while a dedicated EN pin and pre-set frequency

minimize design effort required for new designs. The

skip-mode at light load condition, strong gate drivers

and low-side FET RDS(on) current sensing supports

low-loss and high efficiency, over a broad load range.

The TRAN pin provides freedom of masking

overvoltage protection, undervoltage protection and

power-good signal during the transition period of

dynamic output voltage change for modern GPU

power supply applications. The conversion input voltage which is the high-side FET drain voltage

ranges from 3 V to 28 V and the output voltage

ranges from 0.6 V to 2.6 V. The device requires an

external 5-V supply. The TPS51217 is available in a

10-pin SON package specified from –40°C to 85°C.